dslr tripod slider buyer’s guide
We spent many hours on research to finding dslr tripod slider, reading product features, product specifications for this guide. For those of you who wish to the best dslr tripod slider, you should not miss this article. dslr tripod slider coming in a variety of types but also different price range. The following is the top 10 dslr tripod slider by our suggestions:
Best dslr tripod slider
1. Video Tripod System, Cayer BV30L 72 inch- Professional Heavy Duty Aluminum Twin Tube Tripod, K3 Fluid Head, Mid-Level Spreader, Max Loading 13.2 LB, DSLR Camcorder, Plus 1 Bonus Quick Release Plate
Feature
- Supports 13.2 LB, a professional video tripod system designed for HDSLR and interchangeable lens cameras- 2-way Fluid Head features fixed counter balance, pan, and tilt drag with a fixed-length detached pan bar, offers 360 panning and +90 / -70 tilt; Integrated Flat Base with 3/8"-16 Thread
- Two provided quick release plates, each comes with a 1/4"-20 screw, and a 3/8"-16 screw stored in a thread under the plate, offers a sliding range of +20/-25mm - to enable travel capabilities
- Featuring locking rubber buckles, this 2-stage fluid head tripod with a built-in 75mm bowl; mid-level spreader provides enhanced stability by holding the tripod legs in locked position
- Limited 8-Year Warranty | 13.2 lb Load Capacity | 33.3" to 72.7" Height Range | Tilt Angle +90 / -70 | 360 Panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 pcs of Quick Release Plates
Description
The Cayer BV30L Professional Tripod System includes the BV30L Aluminum Tripod and K3a Fluid Head with Carrying Bag. Capable of supporting up to 13.2 lb, the BV30L provides a professional tripod system solution.K3a Video Head
- Weighs 2.5 pounds, supporting up to 13.2 lb
- Separate pan and tilt lock levers, a built-in bubble level indicator
- Fixed counter balance, pan, and tilt drag, +90/-70 tilt angle, 360 panning
- One interchangeable Pan Bar for right and left-handed operators via the two rosettes on either side of the head
- Two universal quick release plates, with 20mm sliding range, a 1/4"-20 Screw and a Spare 3/8"-16 Screw
- Tightened with a 75mm half-ball mount, integrated flat base with 3/8"-16 thread in the center, able to be secured to flat-mount accessories such as sliders, jibs, and more without unwieldy bowl adapters
BV30L Tripod Leg
- Built-in 75mm bowl
- 2-stage 3-section leg design allows you to adjust the height of the tripod from 35" to 72.7"
- Mid-level spreader provides enhanced stability by holding the tripod legs in locked position
- Supports payloads of up to 88lb, even larger video heads or heavy dollies and sliders can be supported by the tripod itself
Specificaions:
Material: Aluminum Alloy
Tilt range: -70 to +90
Pan range: 360
QR Plate Length: 4.33" / 110 mm
Friction Control: Fixed
Mounting Platform: 1/4" ; spare 3/8" screws
Diameter (bowl):3" / 75mm
Sections: 3
Flod Length: 35" / 890 mm
Max. Operating Height: 72.7" / 1845 mm
Min. Operating Height: 33.3" / 848 mm
Loading Capacity: 13.2 lbs / 6 kg
Weight: 8.82 lbs / 4 kg
Packing List:
1 x BV30L Tripod Leg
1 x K3 Fluid Head
1 x 75mm Half Ball Adapter
1 x Head Lock Handle
1 x Extra QR Plate (2 pcs in total)
2 x Hex Keys
1 x Carrying Bag
2. Zecti 15.7 Portable Carbon Fiber Camera Slider Dolly Track With 4 Roller Bearing for Video Movie Photography Making Stabilizing Nikon Canon Pentax Sony Cameras 11.02lbs Loading
Feature
15.7" Slider: This camera slider is made of Carbon Fiber and Aluminum Alloy, CNC more solid and durable.Lightweight and Portable: Zecti camera slider, lightweight 600g,coming with a scratch-resistant carrying bag, it is perfect to be packed for travelling anywhere.
Smooth and Quiet: Four precision bearing stable construction can achieve more smoothly sliding and help create a smooth and noiseless video and image.
Multiple Use: Multiple 1/4 inch and 3/8 inch screw holes on both ends and middle for multiple mounting options; It can be used on Table Top,Tripod or Light Stand.
Perfect For Shooting: You can angle the slider to get straight horizontal shots, which help you achieve best shooting experience
Description
Product Description
ZECTI camera slider is made of Carbon Fiber and Aluminum Alloy, more solid and durable.
The camera tracking slider featured with four precision bearings and double interior
carbon fiber rail system ensure good stability and smooth and quiet movement.
Product Features
Two 1/4 inch and 3/8 inch screw holes at each end of the track to mount tripod for vertical shooting.
Five 1/4 inch and 3/8 inch screw holes in fixed plate to mount tripod for horizontal and even 45-degree shooting.
Four 1/4 inch and 3/8 inch screw holes in slider plate to mount other accessories such as magic arms,light stand to enrich your photo quality!
Universal slider plate with a 1/4" & 3/8" screw hole to hold most DSLR cameras.Locking knob aside to lock down the slider plate!
A bubble level to indicate your slanting degree.
Product Specification
Material: Carbon Fiber
Item Weight: 600g
Load:11.02lbs/5kg
Product size:41.3x11.5x3cm
Packing size:44x15x5cm
Application for equipment: SLR cameras,video cameras,DV,etc
Application for function: video shooting for film, movie, ceremony,wedding,news gathering and etc
Package Content
1 x Camera Tracking Slider
1 x Carrying Case
1 x 1/4"-3/8" Screw Adapter
Notification
The package only includes the Slider.Camera,ball head and tripod are not available.
3. Neewer Camera Slider Carbon Fiber Dolly Rail, 16 inches/40 centimeters with 4 Bearings for Smartphone Nikon Canon Sony Camera 12lbs Loading
Feature
SOLID CONSTRUCTION: Made of Carbon Fiber and Aluminum Alloy, more solid and durable, Only 16 inches/40 centimeters Mini Video Slider,You can take it anywhere travel in bagGREAT COMPATIBILITY: Multiple 1/4 inch and 3/8 inch screw holes on both ends and middle for multiple mounting options; Can be used on Table Top, Tripod or Light Stand (1/4 inch to 3/8 inch screw adapter is included, NOTE: Light stand, tripods are NOT Included)
BETTER MOTION CONTROL: With 5.8-8.8cm Width Cellphone Holder,enables professional-quality motion control for a range of supported iPhone,Samsung,Huawei Smartphone,cameras,camcorders,and DSLR cameras
SMOOTH MOVEMENT: Four precision bearing stable construction can achieve more smoothly sliding and help create a smooth and noiseless video and image
PERFECT FOR SHOOTING: You can angle the slider to get straight horizontal shots, which help you achieve best shooting experience
Description
NOTE: Light stand, tripods are NOT Included.
Description:
This camera slider is made of Carbon Fiber and Aluminum Alloy, more solid and durable.
Multiple 1/4 inch and 3/8 inch screw holes on both ends and middle for multiple mounting options; It can be used on Table Top,Tripod or Light Stand.
It enables professional-quality motion control for a range of supported cameras, camcorders, and DSLR cameras.
Four precision bearing stable construction can achieve more smoothly sliding and help create a smooth and noiseless video and image.
You can angle the slider to get straight horizontal shots, which help you achieve best shooting experience.
Specifications:
Material: Carbon Fiber+Aluminum Alloy
Length: 15.75"/40cm
Width: 4.33"/11cm
Height: 1.18"/3cm
Item Weight: 22.2oz/630g
Load: 12 lbs/5.4kg
Package Contents:
1 x Carbon Fiber Camera Mini Slider
1 x Cellphone Holder
1 x 1/4"-3/8" Screw Adapter
4. Neewer 24 inches/60 centimeters Aluminum Alloy Camera Track Slider Video Stabilizer Rail for DSLR Camera DV Video Camcorder Film Photography, Load up to 11 pounds/5 kilograms
Feature
Full featured professional camera slider for heavy duty camera systems that provides shake-free stability and support to cameras while shootingUse on a tripod, or on a flat surface with included removable and adjustable legs with non-skid rubber feet. Multiple 1/4" & 3/8" screw holes on both ends and middle for multiple mounting options
The dolly slider has a double interior rail system that uses four precision bearings to add smooth movement to any project.
Two removable and legs are also included and can raise the slider up to 2 inches off of the ground.
You can angle the slider to get straight horizontal shots, or you can slope it on a tripod, position it vertically on a tripod, use it as a crane on a tripod, or even attach it flipped over on two tripods.
Description
Features:
Full featured professional camera slider for heavy duty camera systems that provides shake-free stability and support to cameras while shooting
Use on a tripod, or on a flat surface with included removable and adjustable legs with non-skid rubber feet. Multiple 1/4" & 3/8" screw holes on both ends and middle for multiple mounting options
The ultra-compact dolly slider adds dynamic horizontal, vertical and diagonal movement to your videos.
Use the dolly slider for dramatic video cinematography or slow motion moving photo captures.
You can even adjust the bearing tension to customize the dolly slider to your exact needs.
Two removable and legs are also included and can raise the slider up to 2 inches off of the ground.
You can angle the slider to get straight horizontal shots, or you can slope it on a tripod, position it vertically on a tripod, use it as a crane on a tripod, or even attach it flipped over on two tripods.
Bubble level to indicate how straight or angled the slider is positioned.
Specification:
Material: Aluminum Steel
Color: Black
Size: 24"x1.95"x1.05" / 60x5x2.7cm
Max load: 176oz/5kg
Notes: This only for the slider and the removable legs, camera, tripod and ball head not included
1x Camera Track Slider
2x Adjustable Legs
1x Screw Tool
4x Screws
1x 3/8" to 1/4" Mounting screw
5. Neewer 23.6 inches/60 centimeters Aluminum Alloy Camera Track Slider Video Stabilizer Rail with 4 Bearings for DSLR Camera DV Video Camcorder Film Photography, Load up to 17.5 pounds/8 kilograms
Feature
4 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on aluminum alloy tubesFlexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head
Multi-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider
Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters; Gear-shaped joint interface and locking knobs for better position locking for the legs
Convenient Carrying Bag: Easy to carry, transport and store; Excellent company for video making
Description
Note: Camera, tripod and ball head are not included.
Descriptions:
The aluminum alloy camera track slider rail helps you with smooth movements and professional feeling in video making and photography.
We upgrade the product with U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on aluminum alloy tubes to achieve stability and quietness when used to filming.
4 U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on aluminum alloy tubes.
2 threaded holes at each end of the track to mount tripod for vertical shooting; 4 threaded holes in fixed plate to mount tripod for horizontal and even 45-degree shooting; 2 threaded holes in slider plate to mount other accessories such as magic arms to enrich your photo quality.
Foldable legs for less a burden, easier portability and quicker set up time.
Leg position is adjustable in large scale for demanding filming task.
Gear-shaped joint interface and locking knobs for better position locking.
Height of legs could be adjusted from 8.5 centimeters to 10 centimeters.
Universal slider plate with a 1/4 inch threaded hole to hold most DSLR cameras. (Even comes with a 1/4 inch to 3/8 inch screw)
Locking knob aside to lock down the slider plate.
Partly hollowed out for more scientific way to load.
Round rubber pad to avoid scratches to your camera's bottom.
A bubble level to indicate your slanting degree.
Comes with a convenient carrying bag, easy to carry, transport and store.
Specifications:
Material: Aluminum Alloy
Length of Track: 23.6 inches/60 centimeters
Maximum Leg Height: 3.9 inches/10 centimeters
Minimum Leg Height: 3.3 inches/8.5 centimeters
Load Capacity: 17.5 pounds/8 kilograms
Package Contents:
1 x Aluminum Alloy Track Slider Rail
1 x Carrying Bag
6. Neewer 23.6 inches/60 centimeters Carbon Fiber Camera Track Slider Video Stabilizer Rail with 6 Bearings for DSLR Camera DV Video Camcorder Film Photography, Load up to 17.5 pounds/8 kilograms
Feature
6 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubesFlexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head
Multi-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider
Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters; Gear-shaped joint interface and locking knobs for better position locking for the legs
Convenient Carrying Bag: Easy and carry, transport and store; Excellent company for video making
Description
Note: Camera, tripod and ball head are NOT included.
Description:
The Carbon Fiber Camera Track Slider Rail helps you with smooth movements and professional feeling in video making and photography.
We upgrade the product with U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes, to achieve stability and quietness when used to filming.
6 U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes.
2 threaded holes at each end of the track to mount tripod for vertical shooting.
5 threaded holes in fixed plate to mount tripod for horizontal and even 45-degree shooting.
4 threaded holes in slider plate to mount other accessories such as magic arms to enrich your photo quality.
Foldable legs for less a burden, easier portability and quicker set up time.
Leg position is adjustable in large scale for demanding filming task.
Gear-shaped joint interface and locking knobs for better position locking.
Height of legs could be adjusted from 8.5cm to 10cm.
Universal slider plate with a 1/4"" threaded hole to hold most DSLR cameras. (Even comes with a 1/4"" to 3/8"" screw)
Locking knob aside to lock down the slider plate.
Partly hollowed out for more scientific way to load.
Round rubber pad to avoid scratches to your camera's bottom.
A bubble level to indicate your slanting degree.
Comes with a convenient carrying bag, easy and carry, transport and store.
Specifications:
Color: Gold
Material: Carbon Fiber
Length of Track: 23.6 inches/60 centimeters
Maximum Leg Height: 3.9 inches/10 centimeters
Minimum Leg Height: 3.3 inches/8.5 centimeters
Load Capacity: 17.5 pounds/8 kilograms
Package Contents:
1 x 60cm Carbon Fiber Track Slider Rail
1 x Carrying Bag
7. Camera Slider Track Dolly Slider Rail System with Motorized Time Lapse and Video Shot Follow Focus Shot and 120 Degree Panoramic Shooting 31" 80cm
Feature
-Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free set starting point and ending point-For fixed point shooting, you can adjust the red knob on both sides of the slider to the upper left corner and the lower right corner
-For 120 degrees panorama shooting, slide the red knob on both sides of the camera slider to the lower left corner and the upper right corner
-Set the starting and ending points as needed, the sliding speed, the dwell time, the sliding distance, the pause time, the number of pictures etc.
-The sides and the middle of the more than 1/4 "and 3/8" screw holes can be installed on the tripod to support multiple angles
Description
Enter GVM CAMERA SLIDER to view the product feature video immediately on Youtube
ELECTRIC VIDEO SHOT
According to your needs to set the starting point A, the ending point B, speed
(1% -100%)
Automatically round trip (or stop) (save 80% of the time)
(support for tracking shooting and 120 degree panoramic shooting)
TIME LAPSE SHOOTING
According to your needs to set the starting point A, the ending point B,
speed (1% -100%)Automatically round trip (or stop)
Slip speed:1%-100%
Slip interval:0.1 - 999.9
Stoptime:0.1-999.99
photo Number :1 - 9999
Auto loopyes or no
(support for tracking shooting and 120 degree panoramic shooting)
SILENT MOTOR
Newly developed silent motor
makes it earier for the operation of interviews shooting and post-production.
CARBON FIBER SLIDER
Using 8 layers of carbon fiber. Easy and light to carry, mute, stable no trembling, smooth.
SEPCIFICATIONS
Product properties: motorized mode
Size: 31.8inch
Power current: 4W / 400MA
29 inches Sliding time: the fastest 11.4 seconds / the slowest 123 seconds
(video mode)
Fastest 114 seconds / slowest 22 minutes 30 seconds (time lapse)
Electric moving speed: fastest 1.6 S / MIN slowest 0.77 S / MIN (video mode speed)
Slide length: 29inch
Slide rail weight: 5pound
Load-bearing: 11 pounds
PACKAGE LIST
-1x motorized slider
-1 x controller
-1 x battery
-1 x battery charger
-1 x controller connection line
-6 x shutter link
-1 x shutter extension line
-1 x Carrying Bag
8. Neewer Professional Metal 360 Degree Rotating Panoramic Ball Head with 1/4 inch Quick Shoe Plate and Bubble Level,up to 17.6pounds/8kilograms,for Tripod,Monopod,Slider,DSLR Camera,Camcorder
Feature
360 Degree Swivel: Equipped with 3 knobs for adjustment, you are able to set your camera at different angleComes with 3/8'' Bottom Screw Thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing
1/4" quick shoe plate; Easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position
With Fine Tuning Damping to protect your device from sudden plunge while doing versatile angle shooting
The base with index marking to indicate more precise control. Note: Tripod head Only; Camera and tripod are not included
Description
Note: Tripod head Only; Camera and tripod are not included
Descriptions:
Quick shoe plate with 1/4" screw. Easy to set up in seconds.
Both horizontal and vertical bubble level to enhance perception of position.
Smooth ball joint for versatile angle moving.
3/8" screw mount at the bottom enable connection of most type of tripod or light stand
360 Degrees Swivel, equipped with 3 knobs for adjustment, you are able to set your camera at different angle.
Specifications:
Material: Metal
Quick Shoe Plate: 1/4"
Bottom Screw Thread: 3/8"
Load Capacity: 17.6lbs/8kg
Package Content:
1 x Tripod Ball Head
9. Kamerar 31 Fluid Motion Video Slider: flywheel, counterweight, light carbon fiber rails, adjustable legs, dslr camera/camcorder stabilization track, tripod mount ready, stabilizer for filming
Feature
Achieve the perfect slide with precise control over movement with this 31 inches camera slider. This feature-packed slider is both extremely sturdy and ultra-portable.The flywheel counterweight system gives you more consistent and smoother slides when compared to a standard slider. The addition of the handle gives you a different way to operate the slider with a crank for full control over your camera movements.
The Fluid Motion Slider features a high-grade carbon fiber rail system that is sturdy, yet lightweight.
6 SMOOTH ROLLERS: With the increased surface area of the rollers, the weight is distributed evenly and noise is greatly reduced from the sliding motion.
FULLY ADJUSTABLE LEGS: When shooting on uneven surfaces, adjust the height and angle on each leg individually for the smoothest shot possible. Other words people use to search for this product: wheels, neewer, slide, roller
Description
Kamerar 31" Fluid Motion Slider Achieve the perfect slide with precise control over movement with the Kamerar Fluid Motion Slider. Get professional quality at an affordable price. This feature-packed slider is both extremely sturdy and ultra portable. Flywheel Counterweight System The flywheel counterweight system gives you more consistent and smoother slides when compared to a standard slider. The belt drive system ensures optimal performance for fluid and quiet movement. The rotating counterweight provides momentum for smooth acceleration and deceleration when creating the perfect panning shot. A handle is included so you can attach it onto the counterweight. This gives you a different way to operate the slider with a crank for full control over your camera movements. Ultra Light Carbon Fiber Rails The Fluid Motion Slider features a high-grade carbon fiber rail system that is sturdy, yet lightweight. The dual rail combined with the aluminum slider carriage work together to create a tough frame that can hold up to 10 lbs of weight. Slider Carriage The slider carriage features 3/8"-16 mounts for attaching quick release plates, or you can attach it directly to your tripod. The slider carriage has a side mounted brake so you can lock your camera in place. Use the embedded bubble level to make sure your slider is completely level. 6 Smooth Rollers It features 6 rollers that slide smoothly on the sturdy carbon fiber rails. With the increased surface area of the rollers, the weight is distributed evenly and noise is greatly reduced from the sliding motion. Fully Adjustable Legs The fully adjustable legs allow for easy leveling of the slider. When shooting on uneven surfaces, adjust the height and angle on each leg individually for the smoothest shot possible. Package Includes 1- Fluid Motion Slider 1- Counterweight 1- Handle 2- Allen Wrench 1- Bag10. IMORDEN 48"/120cm Ball-bearing Slider for DSLR Camera, Phone and Gopro (Max Load: 15lbs)for Youtuber, Use on Tripod
Feature
BUY A SLIDER GET ONE CHRISTMAS GIFT: 7'' MAGIC ARM: ADD TO THE CART WITHOUT ANY CODE. SMOOTH SLIDE: FOUR roller bearings under the top plate working well with two Chrome Coated Shaft in the rail can prevent rust and corrosion; Max load: 7kg/15lbs.TRIPOD HOLES: Both 1/4" and 3/8" mounting holes on two end sides and the middle bottom of track provide multiple mounting options. Positioned on one or two tripods.
STABLE AND STEADY: Bubble level on top of plate. Adjustable legs with non-skid rubber feet can increase the friction between slider and ground and make the footage more stable.
COMPATIBILITY: You could attach your camera, smartphone like iPhone and Gopro directly with 1/4'' screw on the carriage or use the 1/4'' to 3/8'' sliver screw adapter to mount a ball head or tripod head for flexible shooting.
Note: As a gift, a 1/4" to 3/8" SILVER screw adapter is attached with the 1/4" screw on top of the carriage(the improved slider). Sometimes you need to unscrew it with tools, such as pliers. (Ps: If you received a 3/8" to 1/4" GREEN screw adapter, pls attention do NOT try to attach it with your camera. It can only hold light weight accessories.)
Description
IMORDEN 120cm Middle Camera Slider Dolly TrackThis IMORDEN Middle 48 inch video slider is suitable for any movie camera, video camera, digital camera or other photography equipment.
It provides shake-free stability and support to cameras while shooting.
Features
1. Length: 48"/120cm; -Max load 15lb; -Optimal load:7~13lb.
2. Includes 3/8" and 1/4" Mounting holes
3. Quick, Smooth and Precise. Easy to carry with carrying case
4. Can not only get straight horizontal shots, but also sloped on a tripod, vertically put on a tripod, used as a crane on a tripod or even attached on two tripods for professional photography.
5. Camera could be shot from different angles in filming.
6. Its eagle-claw feet design makes the slider more anti-skid and stable while filming.
Package List:
-1 x 48'' Camera Slider.
-1 x Carrying Bag
-2 x L-shape Hexagon Wrench
- 1 x Microfiber Cloth
-1 x 1/4'' to 3/8'' Screw Adapter
Note:
1. Please notice the difference between Pro slider and Medium slider.
Medium Slider is more lightweight than Professional one. The most visible difference is their legs. Legs of Pro camera slider is more flexible. If you are working not with a flat surface like most real world conditions, the all-terrain spider legs can create a leveled environment.
2. One 1/4'' thread on the platform of the slider
This 1/4'' thread over the platform may directly adapt your 1/4" thread adapter on your camera. You can use a head ball or tripod head as a converter on the slider platform. It will also be easier for you to operate the camera when you make a video or a film.
3. If you get a 3/8" to 1/4" green screw adapter included in the package. Pls attention do NOT try to attach it with your camera directly. It can only hold light weight accessories.
Recent Comments