Best subwoofer amp module for 2024
Finding your suitable subwoofer amp module is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best subwoofer amp module including detail information and customer reviews. Let’s find out which is your favorite one.
Best subwoofer amp module
1. Yeeco 60W+60W+100W Dual Channel Bluetooth Audio Power Subwoofer Amplifier AMP Board High Power Digital Stereo Amp Module Support TF Card Decoding for DIY Sound System Speaker Home Theater
Feature
Input DC 12-24V bluetooth power amplifier with button controlOutput power: Left/Right channel 60W; Bass-100W
Support bass, main volume and bass frequency adjusting knob
Audio input: Bluetooth; USB/TF card decoding; AUX input and 3-Pin port
With transparent acrylic shell, four copper pillars for installation
Description
Parameter:
Input voltage: DC 12-24V (Recommend DC 24V2V)
Input current: >5A
Input impedance: 1k
Input signal: 1.8V
Channel: 2.1
Gain: 45 times
Output power: 60W+60W+100W(L+R+Bass)
Output impedance: 4-8(Left/Right channel)
Size: 16 x 11.4(include the knob) x 4.1cm (Length x Width x Height)
Weight: 300g
Bluetooth connection:
Search "Bluetooth" on your device and connect.
Package include:
1xBluetooth amplifier
2. Pyle PLBASS2.8 8-Inch Super-Slim Active Amplified Subwoofer System
Feature
RCA Low Level Input - Thermal, Short And Overload Protection Circuits - Subsonic Filter (20-50Hz) - High Pass Filter (50-150 Hz)High Level Input - Fuse:215A - 0 to +12dB Variable Bass Boost (@45HZ) - Dimensions: 14.5"(L) x 9.5"(W) x 3"(H)
Green & Red LED Power Status Indicator - RMS Power: 150W x 2 + 300W x 1 - Low Pass Filter (50-150 Hz)
Phase shift Switch: 0 or 180 Degree - MXA Power: 300W x 2 + 600W x 1 - Subwoofer Gain Remote Control
Soft-Delay Remote Turn-On - Subwoofer Gain Control - CH 1/2 Gain Control
Description
The PLBASS2.8 is a 2-Channel low-profile Active Amplified Subwoofer System. Slim design allows for various and multiple installation options and can easily slide under most seats. This system offers you a quick and easy way to upgrade your audio system. This full range amplifier and amplified subwoofer system come with both high level (speaker level) and low level (RCA type) inputs, making this a universal solution for use with any head-unit or other input source. For further flexibility, variable Bass Boost controls were added. Easily control subwoofer levels with the remote level control module.3. Acoustic Audio by Goldwood ACA8T Powered Amplified 8" Car Subwoofer 400W with Wiring Kit and Remote Level Control, Black
Feature
Acoustic Audio ACA8T powered 8" loaded tube bass speaker with wiring kit and remote level control, 400W max at 4ohm, 91Db SPL and 40-250hz, separate Mountable remote bass level controlBuilt in Class AB Monoblock amp has RCA low level inputs and raw wire high level inputs, 40-250Hz frequency knob, 0-12dB Bass boost knob, gain/volume knob, high efficiency FET switching power supply
Built in automatic thermal/short/overload protection circuitry, LED power and protect lights, power voltage is 13.5V, aviation carpet, fits most vehicles, Dimensions are (L x W x H) 18"x10"x10.25"
Delivered fully assembled, wiring kit includes the remote bass control module, 16' remote cable, 3' ground power cable, 16' power cable, 16' RCA cable and 16' remote control cable
Designed in the USA, Professional installation recommended, use for car, Truck and SUV, This Listing and price is for 1 bass speaker, remote bass control, wiring kit and full instructions
Description
Acoustic Audio ACA8T powered 8" loaded tube bass speaker with wiring kit and remote level control. This speaker has 400 watts of max power at 4ohm, 91dB SPL and 40 - 250Hz frequency response. The 8" subwoofer has a 1.5" ASV voice coil, polypropylene injected cone and butyl rubber surround. Features include a separate mountable remote bass level control, built in class AB Monoblock amp that has RCA low level inputs and raw wire high level inputs. Control functions are a 40 - 250Hz frequency knob, 0 - 12dB Bass boost knob and gain / volume knob. Inputs include a remote bass input, positive, negative and ground power connections. This heavy-duty bass speaker also features a 20A replaceable fuse, high efficiency FET switching power supply, built in automatic thermal / short / overload protection circuitry, LED power and protection indicator lights. The power supply voltage is 13.5V and 10.8V - 15.6V allowable. Aviation grade carpet on the sealed tube enclosure that fits most vehicles. The loaded tube speaker dimensions are (L x W x H) 18" x 10" x 10.25" and is delivered fully assembled. The wiring kit includes the remote bass control module, 16' remote cable, 3' ground power cable, 16' power cable, 16' RCA cable and 16' remote control cable. Designed and engineered in the USA. Professional installation is recommended. Use for car, truck and SUV. This Acoustic Audio ACA8T has 400 watts of pure bass power. High and low-level inputs allow for installation to almost any car audio system. Multiple function control knobs provide the best sound customization. The remote bass control module and wiring kit has everything you need to bump and thump all day and all night long!4. 2x80W+100W Digital Power Amplifier Board, Yeeco DC 12-26V Car Audio Sereo Amplifier AMP Module for Audio System DIY Speakers with Volume Knob, Heatsink, 3.5mm Audio Input/DC Connector
Feature
DC 12-26V power supply audio amplifier; great for connecting to telephone or computer; DIY speaker; vehicle auto; home theater; music playing on the street/ square/ shopping mall sound amplifyTwo chips - one for the left/ right channel power amplify and the second is in bridge connection to drive the subwoofer
Digital amplify chip, up to 90% efficiency, low idle loss and high heat dissipation; 1.6mm circuit board, smooth surface, heat resistant and tide resistant
With DC power supply port and DC 12-26V wiring terminals (please do not use in the same time); 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment
Several symmetrically mounted capacitances, big capacity, great filtering and energy storage function; Inductance coil has inhibition for the AC; European style wiring terminal
Description
Product information:
Power supply: DC 12-26V
Output power: 80W*2 100W*1(Subwoofer)
Output load: 4-8
Respond range: 14-100KHz
SNR: 100db
Channel amount: 3 (left+right+subwoofer)
Switch frequency: 1.2MHz
Weight: 126g
Size: 116mm*74mm*29mm (length * width * height)
Please note that noise will happen in these situation:
(1)Hardware problem:
-Power supply is not sufficient or not stable;
-Using switch power supply
-Using transformer as power supply and without shield & isolation; wdo not avoid interference
-Local at the environment with electromagnetic interference
-Audio input has its own problem
(2)Software problem:
-Audio driver setting
-Music Player effects setting
Solution:
(1)Hardware problem-> The power supply should not be placed too close to the amplifier board in order to avoid electromagnetic interference. It is better to use high quality power supply which offers stable power. If you use power transformer, using an iron sheet to cover the transformer is highly recommended.
(2)Software problem-> When you connect the amplifier to telephone or computer, you can turn off the special effects software or sound card driver effects settings. Using the software after making sure they will not take effect on the sound effect.
Package:
1*Power Amplifier
5. TDA7498 100W + 100W Dual Channel Class D Audio Amplifier Board, DC 24V Digital Stereo Power Amp Module for 8 Home Theater Subwoofer Computer Speaker Motorcycle
Feature
Adopts TDA7498 dual-channel power amplifier chip, high power, good sound quality, no distortion, give you a great hearing enjoyment.Output power: 100W+100W (Vcc = 36 V, RL = 6, THD: 10%); Output power: 80W+80W (Vcc = 34 V, RL = 8, THD: 10%); High efficiency: 90%
Adopts 36-pin PowerSSO packaging with exposed pad up (EPU), that is more convenient to mount a separate heatsink.
Provided with short-circuit protection and over temperature protection, besides, it has high efficiency which is up to 90%.
Has three kinds of modes: standby, mute and normal working mode (you can set the mode by shorting the pins shown on pictures).
Description
Parameters:Amplifier chip: TDA7498
Output power: 100W+100W (Vcc = 36 V, RL = 6, THD: 10%)
Output power: 80W+80W (Vcc = 34 V, RL = 8, THD: 10%)
Wide range single power supply: 15-34VDC(recommended 24V)
Applicable speaker impedance: 8 ohm best(4 ohm or 6 ohm also works)
Four fixed gain settings available: 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
Adopts differential input to minimize common-mode noise
Protection: short-circuit protection, over temperature protection
With standby and mute features
High efficiency: 90%
3 Modes:
(you can set the mode by shorting the pins shown on pictures).
Standby mode: all circuits closed, at a low power state;
Mute mode: all input signals connects ground, the duty cycle of forward/backward PWM output signal is 50%;
Normal working mode: the amplifier works normally.
Package Includes:
1 x TDA7498 Amplifier Board
6. TPA3116D2 Amplifier Board, 2.1 Channel Class D Digital Power Audio Stereo AMP Module 2 x 50W+100W(Left,Right & Subwoofer) for Audio System DIY Speakers, XH-M139
Feature
This easy-to-use 2.1 amplifier board is big on power, delivering 50 watts into stereo channels and an additional 100 watts into a mono subwoofer channel. Use this board for multimedia sound systems, boom box projects, digital signage, or even mobile audio.Pre-assembled and pre-tested for easy project integration, which makes your project easy to complete. The on-board jacks, potentiometers, and screw terminals mean you can get this board powered up and playing music in minutes.
3.5 mm audio jack, 2.1 mm DC power jack, and phoenix speaker connectors for easy hookup, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included).
The amplifier board uses TPA3116D2 chip as core which is a high-performance digital power amplifier chip. Built-in volume, subwoofer, and satellite potentiometer for sound customization.
Wide voltage power supply from 12V to 24V DC, energy saving design, the efficiency is high.
Description
Features:
- Class D efficiency in a compact size
- 12 to 24 VDC for versatility
- 2 x 50W plus 100W into a mono channel for 2.1 applications(left/right and subwoofer channel)
-Adopts two high-quality TPA3116D2 digital amplifier chips.
-A user can adjust the volume by themselves easily.
-Applicable speaker impedance: 4-8 ohm.
Specification:
Chip type: TPA3116D2 x 2
Power supply: DC 12-24V
Output load: 4-8
Output power: 50W*2(Left & Right) 100W*1(Subwoofer)
Frequency Response Range: 14-100KHz
SNR: 100db
Channel amount: 3 Channels(Left Channel, Right Channel, Subwoofer Channel)
Switch frequency: 1.2MHz
Signal input: 3.5 mm stereo jack or 3-pin socket
Signal output: 6 screw terminals
Power requirements: 12-24 VDC
Power input: 2.1 mm x 5.5 mm DC jack
This handy audio amplifier board has big power in a small package. Delivering 2 x 50W plus 100W into a mono channel, this 2.1 board makes it easy to add the bass you need to your next powered speaker project. Use this board in desktop multimedia powered speakers or cool boom box applications. The tiny size makes implementation limitless and the easy-to-use 12 VDC power requirement makes it a great addition to any mobile audio project.
These boards are pre-tested and pre-assembled, which makes your project easy to complete. The onboard jacks, potentiometers, and screw terminals mean you can get this board powered up and playing music in minutes. Just connect your power source using a 2.1 x 5.5 mm DC power plug, a 3.5 mm stereo audio source, and run speaker wire from the six screw terminals to your speakers and you are done. If you don't want to use the 3.5 mm jack, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included).
Package Included:
1 x TPA3116D2 Amplifier Board
7. Yeeco 2.1 Channel Audio Stereo Amplifier Subwoofer Board; DC 12-24V High Power 2x50W 1x100W Sub Output Super Bass Power Amplifier Amp Ampli Module
Feature
DC 12-24V 50W+50W+100W(Bass) audio amplifier board; Come with transparent protective caseWith 2cm Stereo/ Bass/ Volume controlled knobs; Detachable heat sink chip; Suppress interference & filter noise chip inductors and DC connecting port
With both characteristic of >90%power efficiency and and low idle loss, prevent AM interference
Note that this amplifier does not come with a power supply! So please prepare a 24V 5A 120W power supply with 5.5*2.1mm barrel connector
Dimension: 134x137x68mm(length x width x height), non-slip base help you keep the amplifier safe in place
Description
Product name: 2.1 Channel Audio Amplifier
Product Model: XH-M566
Chip Type: TPA3116D2 x 2
Power Supply: DC 12-24v
Output Power: 50Wx2; 100Wx1(Super Bass)
Output Load: 4-8
Frequency Response Range: 14-100KHz
Signal Noise Ratio: 100db
Channel Amount: 3(left+right+bass)
Switch Frequency: 1.2MHz
Product Size: 134x137x68mm
Precaution:
1. NOT include a power supply, please prepare a DC 24V 5A 120W power supply with 5.5*2.1mm barrel connector;
2. Do not use power transformer to power on this amplifier! (Because power transformer uses AC electricity, this amplifier only applies to DC electricity);
3. Do not connect the amplifier in series or parallel arbitrarily to get higher output power;
4. It is a normal phenomenon that there is rustle coming from the amplifier even if no sound is played. Well connect the audio wire and MP3, there won't have noise when playing music and please turn off the amplifier if you do not play music.
Package Include:
1xAudio Amplifier
8. DROKxae; TPA3123 Class D Digital Subwoofer Amplifier 2.1 Channel Amp DIY Board
Feature
This amplifier board with 2*TPA3123 digital amplifier chip, one for left and right channel power amplifier, one for bridge driver subwoofer, Left and right channel output 20W*2, subwoofer output 40W, efficiency can reach above 90%, small size, efficient, high-power. can use laptop switching power supply or battery-powered devices, such as motorcycles, cars, electric cars and etc.Powered: DC 12V-24V (voltage suggested: 15V-20V, high-quality switching power supply)
Maximum output: left and right channel 25W*2, subwoofer 50W
Size: 82mm * 65mm
Description
Overview:This amplifier board with 2*TPA3123 digital amplifier chip, one for left and right channel power amplifier, one for bridge driver subwoofer, Left and right channel output 25W*2, subwoofer output 50W, efficiency can reach above 90%, small size, efficient, high-power. can use laptop switching power supply or battery-powered devices, such as motorcycles, cars, electric cars and etc.
Specifications:
Powered: DC 12V-24V (voltage suggested: 15V-20V, high-quality switching power supply
Maximum output: left and right channel 20W*2, subwoofer 40W
Size: 82mm * 65mm
Enter hole pitch: 2.5mm
Output hole pitch: 5mm
Potentiometer pitch: 28.5mm
Please note: For subwoofer, recommended to connect 8-ohm speaker, if using a 4 ohm speaker, please make sure the power supply is within 20V. For left and right channel, 4- 8-ohm speakers are all OK.
Package include:
1x TPA3123 Digital Amplifier Board
9. EPBOWPT 12V 30A Universal Regulated Switching Power Supply Driver for LED Strip Light CCTV Radio Computer Project
Feature
Over Load and Short Circuit ProtectionAuto-recovery after protection
AC input: 100-120V; 200-240V
Output: 12V , 0 ~ 30A
Power Supply for 3D Printer , ham Radio Transceiver , Car Subwoofer amp Audio Amplifier , RC LiPo Chargers and LED Strips
Description
Features:
Universal AC input / full range
Full load burn-in test
It's good quality and high performance
Great switching power supply for home appliances
Specifications:
Input: AC 110V/220V 20%
Output: 12V DC 30A
The output direct voltage adjustable range: 10%
The output voltage tolerance: 1%
Nominal power: 360W
Protections: overload / over voltage / short circuit
Material: Metal
Weight: 24oz / 700g
Dimension: 21.5 x 11.5 x 5cmL x W x H
Temperature control: when temperature is up to 45, the fan will work to dissipate heat.Technical Specifications:
Manual Switch between 115V and 230V Input ,+ / - 10% adjustable output voltage.
Auto on/off cooling fan.
High Efficiency, Low Temperature,High reliability.
LED indicator for power on.
Built-in EMI Filter.
Gross Weight: 2 lb
Color: Silver
Power for 3D Printer , ham Radio Transceiver , Car Subwoofer amp Audio Amplifier , RC LiPo Chargers and LED Strips.
10. Clyxgs 2.1 Channel Class D Digital Power Audio Stereo AMP Module 2x80W+100W(Left,Right & Subwoofer) TPA3116D2 Amplifier Board,12-26V Recommended 24V 100 decibels
Feature
1Two TPA3116D2 Chips - one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer.2:DC 12-24V wide input voltage; 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment.
3:80W*2+100W 2.1 channels (left+right+subwoofer), high efficiency and low heat.
4:Wide voltage power supply from 12V to 24V DC, energy saving design, the efficiency is high.
5:3.5 mm audio jack, 2.1 mm DC power jack, and phoenix speaker connectors for easy hookup, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included).
Description
Features:- Class D efficiency in a compact size
- 12 to 24 VDC for versatility
- 2 x 50W plus 100W into a mono channel for 2.1 applications(left/right and subwoofer channel)
-Adopts two high-quality TPA3116D2 digital amplifier chips.
-A user can adjust the volume by themselves easily.
-Applicable speaker impedance: 4-8 ohm.
Specification:
Chip type: TPA3116D2 x 2
Power supply: DC 12-24V
Output load: 4-8
Output power: 80W*2(Left & Right) 100W*1(Subwoofer)
Frequency Response Range: 14-100KHz
SNR: 100db
Channel amount: 3 Channels(Left Channel, Right Channel,Subwoofer Channel)
Switch frequency: 1.2MHz
Signal input: 3.5 mm stereo jack or 3-pin socket
Signal output: 6 screw terminals
Power requirements: 12-26 VDC
Power input: 2.1 mm x 5.5 mm DC jack
Users can easily adjust the volume, just connect the power and speakers that you can enjoy pure digital music.
Sound quality is very good, high efficiency and amplifying power. Great for great for connecting to telephone or computer, DIY speaker, vehicle auto stereo, etc.
The amplifier board uses TPA3116D2 chip as core which is a high-performance digital power amplifier chip. Built-in volume, subwoofer, and satellite potentiometer for sound customization.
Pre-assembled and pre-tested for easy project integration, which makes your project easy to complete. The on-board jacks, potentiometers, and screw terminals mean you can get this board powered up and playing music in minutes.
This easy-to-use 2.1 amplifier board is big on power, delivering 50 watts into stereo channels and an additional 100 watts into a mono subwoofer channel. Use this board for multimedia sound systems, boom box projects, digital signage, or even mobile audio.
Package Content :
1 x2.1 high power channel power amplifier board
This easy-to-use 2.1 amplifier board is big on power, delivering 50 watts into stereo channels and an additional
Recent Comments