Which is the best firework remote firing?
Finding your suitable firework remote firing is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best firework remote firing including detail information and customer reviews. Let’s find out which is your favorite one.
Best firework remote firing
1. 4 Cue Remote Wireless Control Fire-Work Firing Systemand Wedding Equipment EMB01-04R
Feature
Two igniting modes: Single(Dividual), SequentialThe receiver is programmable. Test Function.
Frequency&Transmitting Rang: OOK, 433MHz, 200M
Power supply: Receiver 9V battery(not include), Transmitter 12V 23A battery
Included in the system: Four EMB01 receivers, one ETX200-4 transmitter
Description
1.4 cue remote control system, include 4 pcs receivers, one remote transmitter ETX200-4.2. The system has tow working modes. Single mode, Sequential mode(interval time 0.1S, 0.2S, 0.3S, 0.4S, 1.1S, 1.2S, 1.3S, 1.4S). If you buy a extra 12-buttons-transmitter(ETX2000-12) , it also has Salvo mode and Step mode.
3. Each receiver could ignite 3-5 pcs products in parallel or 6-10 pcs products in series.
4. The receiver is programmable, it learns the code of the transmitter with the button "Learn", if the receiver or the transmitterhas some problem, it can be replaced with another.
5. The receiver learns the code of the transmitter to number the receiversin sequence. They work according to thesequence number while Sequential mode.
6. Test Function: The Test LED will be lit if the product is connecting well.
7. Short protection: The receiver can not be damaged by a short in cue.
8. Low voltage indication.
9. Transmitting Rang: 200 meters
10. Frequency: OOK, 433MHZ
11. CE/ FCC Passed.
12. Power supply:
Receiver(not include): 9V battery
Transmitter: 12V 23A battery
13. Two working modes (1) Single mode. Just the corresponding receiver ignites according to the button of the transmitter which the receiver had learned. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter, then choose which group it belongs to. The sequence number could be 1,2,3,.....48. Then press the button of the transmitter, all the cues will be ignited at a identical time interval(0.1-2.0 seconds). Switch the Function Switch of the receiver, you can set the interval time.
2. Alpha Fire 4 cue
Feature
Ships from the USA1 x 9 Volt battery per cue required. (not included).
RF Radio, OOK, 433.92MHz
Wireless distance is 200 meters
2-position switch for ARM and power OFF
3. 36 Cue Remote Wireless Control System and Wedding Equipment
Feature
1. Four modes: Single(Dividual), Sequential, Step and Salvo2. One transmitter can control 144 cues to the maximum, you can choose how many receivers to be used. The receiver is programmable.
3. Frequency&Transmitting Rang: 433MHz, 1000M
4. Two types of power supply: Internal power or External power
5. Included in the system: 3 Pcs EMB12 receivers, one ETX2000-12 transmitter, 3 Pcs external power wire jumpers, one carry case
Description
1. 36 cue Remote control system, include two receivers, one remote transmitter, two external battery wire jumpers, one carry case2. The system has four working modes. Single mode, Sequential mode, Salvo mode and Step mode
3. Each receiver has 12 cues, each cue could ignite 6-8 pcs products in parallel or 12 pcs products in series
4. The system can be programmable. If you buy 12 receivers, one transmitter can control 144 cues to the maximum while Sequential mode, Salvo mode and Step mode. The receivers learn the code of the transmitter to number the receivers in sequence. It can be 12 sequence numbers while Sequential mode, Salvo mode and Step mode. So you can control 144 cues to the maximum.
5. Test Function: The led of cue will turn off if the corresponding product is connecting well.
6. Short protection: The receiver can not be damaged by a short in cue
7. Low voltage indication
8. Transmitting Rang: 1000M
9.Frequency: OOK, 433MHZ
10. Power supply of receiver(not included): You can use internal or external power (1)Internal power: 8 x AA battery (2)External power: DC 10-28V
11. Power supply of transmitter(not included): 9V battery
12. Receiver size: 165x105x55mm
13. Four working modes (1)Single mode. Just ignite the corresponding receiver according to the button of the transmitter which you press. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter. The sequence number could be 1,2.....12. Then press the button "0.1-1.0" of the transmitter, all the cues will be ignited at a identical time interval(0.1-5.0 seconds). Switch the Function Switch of the receiver, you can set the interval time. (3) Step mode. Press the button "Step" of the transmitter to ignite one by one from the first cue to the last cue. it will ignite according to the sequence number of the receiver.(4) Salvo mode. Press the button "All" of the transmitter to ignite all the cues at the same time.
4. Single Cue Remote Wireless Control Fire-Work Firing Systemand Wedding Equipment EMB01-01R
Feature
Two igniting modes: Single(Dividual), SequentialThe receiver is programmable. Test Function.
Frequency&Transmitting Rang: OOK, 433MHz, 200M
Power supply: Receiver 9V battery, Transmitter 12V 23A battery
Included in the system: One EMB01 receivers, one ETX200-1 transmitter
Description
1.One cue remote control system, include one receiver, one remote transmitter ETX200-1.2. Each cue could ignite 3-5 pcs products in parallel or 6-10 pcs products in series.
3. The receiver is programmable, it learns the code of the transmitter with the button "Learn", if the receiver or the transmitterhas some problem, it can be replaced with another.
4. Test Function: The Test LED will be lit if the product is connecting well.
5. Short protection: The receiver can not be damaged by a short in cue.
6. Low voltage indication.
7. Transmitting Rang: 200 meters
8. Frequency: OOK, 433MHZ
9. CE/ FCC Passed.
10. Receiver size: 60x50x47mm
11. Power supply(not included in the item) :
Receiver: 9V battery
Transmitter: 12V 23A battery
5. Alpha Fire 1 cue
Feature
Ships from the USA1 x 9 Volt battery per cue required. (not included).
RF Radio, OOK, 433.92MHz
Wireless distance is 200 meters
2-position switch for ARM and power OFF
6. 24 Cue Remote Wireless Control System and Wedding Equipment EMB12-02R
Feature
1. Four modes: Single(Dividual), Sequential, Step and Salvo2. One transmitter can control 144 cues to the maximum, you can choose how many receivers to be used. The receiver is programmable.
3. Frequency&Transmitting Rang: 433MHz, 1000M
4. Two types of power supply: Internal power or External power
5. Included in the system: Two EMB12 receivers, one ETX2000-12 transmitter, two external power wire jumpers, one carry case and one user's manual.
Description
1. 24 cue Remote control system, include two receivers, one remote transmitter, two external battery wire jumpers, one carry case2. The system has four working modes. Single mode, Sequential mode, Salvo mode and Step mode
3. Each receiver has 12 cues, each cue could ignite 6-8 pcs products in parallel or 12 pcs products in series
4. The system can be programmable. If you buy 12 receivers, one transmitter can control 144 cues to the maximum while Sequential mode, Salvo mode and Step mode. The receivers learn the code of the transmitter to number the receivers in sequence. It can be 12 sequence numbers while Sequential mode, Salvo mode and Step mode. So you can control 144 cues to the maximum.
5. Test Function: The led of cue will turn off if the corresponding product is connecting well.
6. Short protection: The receiver can not be damaged by a short in cue
7. Low voltage indication
8. Transmitting Rang: 1000M
9.Frequency: OOK, 433MHZ
10. Power supply of receiver(not included): You can use internal or external power (1)Internal power: 8 x AA battery (2)External power: DC 10-28V
11. Power supply of transmitter(not included): 9V battery
12. Receiver size: 165x105x55mm
13. Four working modes (1)Single mode. Just ignite the corresponding receiver according to the button of the transmitter which you press. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter. The sequence number could be 1,2.....12. Then press the button "0.1-1.0" of the transmitter, all the cues will be ignited at a identical time interval(0.1-5.0 seconds). Switch the Function Switch of the receiver, you can set the interval time. (3) Step mode. Press the button "Step" of the transmitter to ignite one by one from the first cue to the last cue. it will ignite according to the sequence number of the receiver.(4) Salvo mode. Press the button "All" of the transmitter to ignite all the cues at the same time.
7. EMB01-12R Remote Wireless Control System
Feature
Four modes: Single(Dividual), Sequential, Step and SalvoOne transmitter can control 48 receivers to the maximum, you can choose how many receivers to be used. The receiver is programmable.
Frequency&Transmitting Rang: 433MHz, 1000M
Power supply: 9V battery
Included in the system: 12 pcs EMB01 receivers, one ETX2000-12 transmitter, one carry case and one user's manual.
Description
1. 12 cue remote control equipment, include 12 pcs receivers, one remote transmitter, one carry case.2. The equipment has four modes. Single, Sequential, Salvo and Step.
3. Each receiver could ignite 3-5 pcs products in parallel or 6-10 pcs products in series.
4. The equipment can be programmable. If you buy 4 sets, one transmitter can control 48 receivers to the maximum while Sequential, Salvo and Step. The receivers learn the code of the transmitter to number the receivers in sequence. And it could divide into 4 groups, there are 12 receivers in each group. So it can be 48 sequence numbers while Sequential, Salvo and Step.
5. Test Function: The Test LED will be lit if the product is connecting well.
6. Short protection: The receiver can not be damaged by a short in cue.
7. Low voltage indication.
8. Transmitting Rang: 1000 meters
9. Frequency: OOK, 433MHZ
10. Receiver size: 60x50x47mm
11. CE/ FCC Passed.
12. Power supply(not included in the item): Receiver: 9V battery Transmitter: 9V battery
13. Four modes (1) Single mode. Just ignite the corresponding receiver according to the button of the transmitter which the receiver had learned. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter, then choose which group it belongs to. The sequence number could be 1,2,3,.....48. Then press the button "0.1-1.0" of the transmitter, all the cues will be ignited at a identical time interval(0.1-2.0 seconds). Switch the Function Switch of the receiver, you can set the interval time. (3) Step mode. Press the button "Step" of the transmitter to ignite one by one from the first receiver to the last receiver. it will ignite according to the sequence number of the receiver. (4) Salvo mode. Press the button "All" of the transmitter to ignite all the cues at the same time.
8. hot sale 2 inch 18 shots AL racks for single shot or roman candles, fireworks racks, display racks, shell racks for display, fireworks firing system
Feature
1.Special for single shot and stage fountains;tube size from 32mm to 61mm;2.It is made of pure aluminium alloy
3. Each tube has a stainless steel leaf spring,it can be adjusted by different size fireworks
4.You can adjust the angle for display effect
5. More size and models available
Description
Package by paper carton Weight: 8.5KG9. 36 Chnannel Remote Wireless Control System Stage and Wedding Equipment EMB36-01R
Feature
Four working modes: Single, Sequential, Step and SalvoOne transmitter can control 432 cues to the maximum, you can choose how many receivers to be used. The receiver is programmable.
Frequency&Transmitting Rang: FSK, 433MHz, 250M
Two types of power supply: Internal power or External power
Included in the system: one EMB36 receiver, one ETX200-12 transmitter, one Li-Po battery in the case, one charge, one antenna,one external power wire jumper and one user's manual.
Description
1. 36 cue Remote control system, include one receiver, one remote transmitter, one Li-Po battery, one charge, one antenna,one wire jumper.2. The system has four working modes. Single mode, Sequential mode, Salvo mode and Step mode.
3. Each receiver has 36 cues, each cue could ignite 6-8 pcs products in parallel or 12 pcs products in series.
4. The system can be programmable. If you buy 12 sets, one transmitter can control 432 cues to the maximum while Sequential mode, Salvo mode and Step mode. The receivers learn the code of the transmitter to number the receivers in sequence. It can be 12 sequence numbers. So you can control 432 cues to the maximum.
5. Test Function: The led of cue will turn off if the corresponding product is connecting well.
6. Short protection: The receiver can't be damaged by a short in cue.
7. Transmitting Rang: 250 meters
8. Frequency: FSK, 433MHZ.
9. Power supply of receiver: You can use internal or external power (1)Internal power:Li-Po battery, working voltage 11.1V-12.6V, 5200mAh, 30C, it can work for 36 hours, in the case of receiver. (2)External power: DC 10-30V
10. Power supply of transmitter: 12V 23A battery
11. Four working modes (1)Single mode. Just ignite the corresponding receiver according to the button of the transmitter which you press. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter. The sequence number could be 1,2,3,.....12. Then press the button "0.1-1.0" of the transmitter, all the cues will be ignited at a identical time interval(0.1-4.0 seconds). Switch the Function Switch of the receiver, you can set the interval time. (3) Step mode. Press the button "Step" of the transmitter to ignite one by one from the first cue to the last cue. it will ignite according to the sequence number of the receiver.(4) Salvo mode. Press the button "All" of the transmitter to ignite all the cues at the same time.
10. eMylo 433Mhz Wireless RF Relay DC 5V-24V 2 Channels Remote Control Switch 2pcs Transmitter with Receiver
Feature
RF switch: Lamps or other household electric appliances are controllable using the remote control, which features long control distance, sensitivity, high anti-interference performance and stability.Long Range: Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 98ft/30m with no obstacle.
Improved structure design: Wires are welded on the circuit board to save the trouble of opening the box during installation and ensure firm connection and safe operation.
Easy Installation: It is a newest minimalist wiring. You only need 5 seconds to flip lever and insert cable without screwdriver. Also do not need to open the covers anymore.
Widely applicable: Used in anti-theft alarm control panels, cars, truck, electric door release locks, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.
Description
Note: It can't use in motor device, such as motor-driven curtain, roller blinds, garage door, gate barriers, water pumps & sprayer etcParameters:
Receiver
Input voltage: DC 5V-24V
Max. load: 5 amp
Number of channels: 2 channels
Frequency: 433 Mhz
Ambient temperature: -30-70, RH: <95%
Overall size: 60 X 78 X 26 mm
Transmitter
Operating Voltage: DC 6V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: PT2260
Modulation: ASK (Stable, less interference)
Encode Type: Group Coding
Battery Type: 2pcs CR2016 3V
Remote Distance: 30-50m (Theoretical value)
Product Dimension: 135x42x25mm
Unique function
1. Two-in-one function: Improved structure design,both wall switch and RF switch are supported and perfectly compatible.
2. Without mutual interference: the transmitters and receivers adopts non-directional wireless encoding technology, allowing independent control,without mutual interference.
3. Overvoltage protection and fire protection: Overload and overvoltage protection, High quality ABS material, flame retardant material, safety always comes first.
This wifi switch has approved the certifications (FCC CE Rohs) ensuring complete protection for you and your equipment.
How to use
Note:
1.For your safety, be sure to connect at power off.
2.Do not confuse the input end with the output end of the WiFi smart switch, and pay attention to the prompt on the panel.
Step I Connection
1.Cut off power supply to the wires to be connected.
2.Flip the lever up to upright position, insert the Live wire and Neutral wire, then lower lever to close the clamp.
Package included:
1 x Receiver
2x Transmitters
1x User Manual
Recent Comments