Which is the best external gps antenna cable?
Finding your suitable external gps antenna cable is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best external gps antenna cable including detail information and customer reviews. Let’s find out which is your favorite one.
Best external gps antenna cable
1. Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3 with External Antenna and uFL to SMA Cable Kit
Feature
Kit includes GPS Receiver, External Antenna and uFL to SMA Cable!-165 dBm sensitivity, 10 Hz updates, 66 channels
5V friendly design and only 20mA current draw
Antenna: 3-5V 28dB 5 Meter cable
uFL to SMA Cable: This cable is RG178 and is 15cm (5.9") long not including the RP-SMA connector.
Description
This is the ultimate GPS module for your Raspberry Pi, Arduino or other microcontroller project! The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. Includes an ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on. Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can easily add one. Comes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. Battery not included. Many tutorials available at Adafruit's website.2. 25 ft Low-Loss Coax Extension Cable (50 Ohm) - SMA Male to SMA Female - Antenna Lead Extender for 3G/4G/LTE/Ham/ADS-B/GPS/RF Radio Use (Not for TV or WiFi)
Feature
SMA Male to SMA Female Coaxial Jumper CableConnect from SMA Equipment to SMA-Style Antennas
25 ft Low-Loss LMR240-size 50-ohm Coax / Heat Shrink on Both Ends
Compatible with all SMA-based equipment including modems and routers from CalAmp, Cisco, Cradlepoint, Digi, Pepwave, Proxicast, Sierra Wireless, Sixnet/Red Lion and many others.
*NOT* for use with Wi-Fi (RP-SMA) or video (cable/satellite/TV) devices
Description
Coaxial extension cable made of low loss LMR240 sized coax cable.Use to connect SMA radio sources such as modems, routers, etc. to the male SMA connector found on many external antennas or to extend the length of an existing SMA coax cable.
Specifications
Connector 1: SMA Male (Inline Plug) - Gold Plated
Connector 2: SMA Female (Inline Bulkhead Jack with nut & washer) - Gold Plated
Length: 25 feet
Coax: Low-loss LMR240 size (0.240 inch diameter)
Impedance: 50 ohm
NOT for use with Wi-Fi (RP-SMA) or video (cable/satellite/TV) devices
Proxicast's coax extension cable assemblies are constructed with top quality extremely low-loss cable and gold plated connectors. Each cable assembly is fully tested. Proxicast recommends LMR195 coax for assemblies up to 10 ft, LMR240 up to 25 ft and LMR400 up to 50 ft. It is acceptable to use a thick cable for the long portion of a cable run and a short thin cable to connect to equipment or antennas, but minimize the total cable length and number of connectors.
RF Connectors
SMA Female jacks are commonly used on 3G/4G/LTE cellular modems, routers and signal amplifiers - check with your equipment manufacturer.
Many indoor cellular antennas have SMA Male connectors; most outdoor antennas have either N-Male or N-Female connectors.
RP-SMA (Reverse Polarity) connectors are commonly used on Wi-Fi equipment. SMA and RP-SMA connectors will not mate.
Video equipment (cable, satellite, TV, etc) uses "F" connectors - which look similar to SMA but they will not mate with SMA connectors.
See the photo gallery above for pictures of the exact connectors on this coax extension cable and note the gender of the connectors you need to ensure male-to-female mating.
All outdoor connections should be weather-proofed. Use Self-Bonding silicone tape (ASIN B00K4PZ9NO) for fast and easy connection sealing.
Proxicast is a USA-based manufacturer of wireless equipment.
3. Detroit Packing Co. Magnetic External GPS Antenna Cable 28dB Gain 20 feet Straight SMB Male to SMB Female Extension - Universal Antenna Extension for Sirius XM Satellite Radio
Feature
Extend your XM or Sirius satellite radio antenna an additional 20ftCan be used in your car or vehicle to extend your satellite add-on antenna
Works with many GPS and 3/4G systems also
Simple to use, no additional activation required
Also compatible with most audiovox, Delphi, onyx and other systems using sib connectors
Description
Extend your XM or Sirius satellite radio antenna an additional 20ftCan be used in your car or vehicle to extend your satellite add-on antenna
Works with many GPS and 3/4G systems also
Simple to use, no additional activation required
Also compatible with most audiovox, Delphi, onyx and other systems using sib connectors
4. External GPS Antenna BNC Male for Garmin StreetPilot III, GPS V III+ Sounder GPSMap 178C 188 276C 298c 398c 498c iCOM 270ML 370ML 278 292 295 296 376C 378 396 478 492 45 172 172C 176 176C 178
Feature
Exceeds Garmin GA 25, GA 26C and GA 29 GPS antennas. Garmin part #010-10052-04 010-00174-03, 010-10299-01, 010-10701-00 Fully compatible with Garmin, Abarten, Furuno, ICOM and NorthStar GPS receivers with BNC antenna connectors. Amplified (active) GPS antenna for exceptional GPS signal reception.Radome: Black Polycarbonate Radome with die-cast base Dimensions: 2.3 in. (L) x 1.9 in. (W) x 0.6 in. (H) Mounting (included): Two permanent magnets, two M3 screws for holes on base Other Mounting Options: Windscreen Suction Cup Mount (Not Furnished C Please click Antenna Mount) Power Gain: 28 dB Gain Operating Voltage: 2.5V~12V DC Power Power Consumption: 12mA +/- 1mA Operating Temperature: -40 to +185 degrees F Noise: 2.0 max. Impedance: 50 ohm Frequency: 1575.42 MHz
Raven Industries Invicta GPS Receiver (110) (RPA) San Jose Navigation AIS Transceiver AIS-2 Synergy Systems AR-10K BNC AR-10S ART-10K SynPaQ/E-M12+T DB Synergy Systems SynPaQ IE-M12 DB9 IE-m12= EN-3 III-M12 QA
Abarten GPS Chart Navigator 951XW (951XW) Furuno GN-80 GPS Receiver AU-12-5B Garmin GPSMAP 100 100STD 120 120XL 125 Sounder 128 15 152 Garmin GPSMAP 185 Sounder 188 188C 192C 196 198C 200 205 Garmin GPSMAP 215 220 225 230 232 235 Sounder 238 276C 298C Garmin GPSMAP 278 292 295 296 376C 378 396 478 492 Garmin GPSMAP 45 172 172C 176 176C 178 Sounder 180 182 182C Garmin GPSMAP 45XL 48 50 65 75 89 90 92 95XL II Plus Pilot Garmin GPSMAP 498C Sounder 525/525S 530/530S 535/535S 540
Garmin GPSMAP 545 545S 550/550S 555/555S 520 520S 205 Garmin GPSMAP III Plus,V,170 130 135 Sounder 152 162 168 Garmin GPSMAP NavTalk Pilot,StreetPilot ColorMap III GA-29 Gilsson Technologies BNC-M BNC2 FME FME2 iCOM GP-270ML GP-360ML High Resolution Graphic Receiver Northstar Chart AN145 AN150 Chartplotter 925 AN150 941X Northstar Chart Navigator 951 951X 952X 961 962 951XD 951XWD
Description
Unique FeaturesA10 Exceeds Garmin GA 25, GA 26C and GA 29 GPS antennas. Garmin part #010-10052-04 010-00174-03, 010-10299-01, 010-10701-00 Fully compatible with Garmin, Abarten, Furuno, ICOM and NorthStar GPS receivers with BNC antenna connectors. Amplified (active) GPS antenna for exceptional GPS signal reception. Built-in magnets for mounting on metallic surfaces. Right Angle BNC connector, which permits maneuverability on dashboards, in backpacks, carrying cases and tight spaces. Built-in permanent mounting holes for mounting on aircraft fuselage, boat surfaces or car/RV/SUV vehicle surfaces. Product Specifications Radome: Black Polycarbonate Radome with die-cast base Dimensions: 2.3 in. (L) x 1.9 in. (W) x 0.6 in. (H) Mounting (included): Two permanent magnets, two M3 screws for holes on base Other Mounting Options: Windscreen Suction Cup Mount (Not Furnished C Please click Antenna Mount) Power Gain: 28 dB Gain Operating Voltage: 2.5V~12V DC Power Power Consumption: 12mA +/- 1mA Operating Temperature: -40 to +185 degrees F Noise: 2.0 max. Impedance: 50 ohm Frequency: 1575.42 MHz Cable: RG174/U (See Shipping Configuration Note) 100% waterproof 3M LONG5. Waterproof GPS Active Antenna 28dB Gain
Feature
Waterproof Active GPS antenna with SMA male connectorMagnetic base allows you to conveniently attach it to to the roof of your car.
28 dB of gain with its built in LNA
Cable length: 3 meters
DC Voltage: 3V to 5V
Description
Boost your signal with this waterproof GPS external antenna with built in low noise amplifier (LNA). This GPS antenna provides 28 dB of gain with its built in LNA. The industry standard SMA connector will work with most GPS systems and the magnetic base allows you to conveniently attach it to to the roof of your car.Technical Specs
1. Dielectric Antenna
Center Frequency: 1575.42MHz 3MHz
V.S.W.R: 2:01
Bandwidth: 5 MHz
Impedance: 50
Peak Gain: > 3dBic based on 7x7cm ground plane
Gain Coverage: > -4dBic at -90 < 0 < 90 (over 75 volume)
Polarization: RHCP
2. LNA/Filter
LNA Gain Without cable: 28dB Typical
Noise Figure: 2.0dB
Filter Out Band Attenuation: (f0=1575.42MHz)
7dB Min f0+/-20MHz;
20dB Min f0+/-50MHz;
30dB Min f0+/-100MHz
V.S.W.R: < 2.0
DC Voltage: 3V to 5V
DC current: 7-10MA
3. Overall
Frequency Range: 1575/1609MHz
V.S.W.R: 2.0
Gain: 303dBic
Impedance: 50?
3. Mechanical
Weight: 60 gram
Size: 45x38x15mm
Cable: RG174
Length: 3m
Connector: SMA
Mounting: Magnet base
Housing: Black
4. Environmental
Working Temp: -40~+105
Waterproof test: 4 hours under the tap, let the water rush over the housing;
Vibration: Sine sweep 1g (0-p) 10 ~ 50 ~ 10Hz each axis
Humidity: 95% ~ 100% R
6. SaferCCTV(TM) 9ft(118inch=3m) Weatherproof Right Angle SMA Male Plug GPS Active Antenna Aerial Connector Cable for Dash Car DVD Head Unit Radio Stereos DVR
Feature
1. Brand new and high quantity2. Plug and Play and : Right Angle Aerial SMA Connector
3. Easy to install: this antenna has a magnetic base which can adhere to any metal surface
4. To help your GPS Navigation System to get stronger & stable signal. Picks up your position rapidly
5. Package include: 1pcs x Right Angle SMA Male Plug GPS Active Antenna Aerial Connector Cable as picture
Description
1.Specifications:(1)V.S.W.R: <2.0
(2)Voltage: 3~5V
(3)Housing: Black
(5)Length: 9feet (3m)
(6)Noise Figure: <1.5dB
(7)DC current: 10mA Max
(8)Working Temp: -40C~+85C
(9)Mounting: Magnetic base
(10)Humidity: Humidity 95%~100%RH
(11)LNA Gain(Without cable): 25dB
(12)Weatherproof: 100% Weatherproof
(13)GPS Active Antenna SMA male connector
(14)Center Frequency: 1575.42MHz-3MHz / 1575.42MHz+3MHz
2.Package Included:
GPS Active Antenna SMA male connector
7. DHT Electronics External GPS Antenna with SMB female for Verizon Samsung 3G Network Extender
Feature
Package Include:1 x Waterproof Active GPS antenna with 3 meter cableMagnetic base allows you to conveniently attach it to to the roof of your car.
28 dB of gain with its built in LNA
DC Voltage: 3V to 5V
DHT Electronics Brand is a Registered Trademark of DHT LLC.Only authorized seller of DHT Electronics can sell under DHT Electronics listings.
Description
External GPS Antenna with SMB female for Verizon Samsung 3G Network Extender8. GPS Antenna with SMB Female Connector, SaferCCTV Weatherproof 3 Meter(10ft) External RG174 Cable for Samsung 3G Verizon Network Extender SCS-2u3100 SCS2u01
Feature
1. Item: GPS Antenna with SMB female connector2. For Samsung 3G Verizon Network Extender, such as work with samsung scs-2u3100, samsung scs2u01 and so on.Did not fit Samsung du-3100
3. Impedance: 50 ohms, Frequency: 0-6Ghz
4. White insulation: PTFE (high temperature resistance)
5. Package include:1 x GPS antenna with 3 meter cable
Description
Specification:1. 100% brand new and high quantity
2. Impedance: 50 ohms
3. Frequency: 0-6Ghz
4. Material: pure gold plated / nickel
5. Item: GPS antenna-SMB-K interface
6. For Samsung 3G Verizon Network Extender
7. White insulation: PTFE (high temperature resistance)
Package include:
1 x GPS antenna with 3 meter cable
9. DHT Electronics External GPS Antenna with BNC male for Garmin StreetPilot III, GPS V III+ Sounder GPSMap 178C 188 276C 298c 398c 498c iCOM 270ML 370ML
Feature
package include:1 x GPS antenna ;antenna cable is about 10 feet
DHT Electronics Brand is a Registered Trademark of DHT LLC.Only authorized seller of DHT Electronics can sell under DHT Electronics listings.
Description
External GPS Antenna with BNC male for Garmin StreetPilot III, GPS V III+ Sounder GPSMap 178C 188 276C 298c 398c 498c iCOM 270ML 370ML10. Antennas GPS Antenna 3-5V 28dB 5 meter SMA
Feature
Adafruit Part Number: 960Stock Type: Wireless >> Antennas
In Stock & Ready to Ship
Description
Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure)
Comes with a standard SMA connector on the end. If you want to connect to our Ultimate GPS V3 module, be sure to pick up a uFL to SMA adapter!
GPS not included.
Recent Comments