Top woodworking lathe drill

If you looking for woodworking lathe drill then you are right place. We are searching for the best woodworking lathe drill on the market and analyze these products to provide you the best choice.

Best woodworking lathe drill

Product	Features	Editor's score	Go to site
	PSI Woodworking Products TM32 1/2-Inch Diameter Drill Chuck with a 2 MT Mount		Go to amazon.com
	PSI Woodworking Products TM32KL Keyless 1/2-Inch Drill Chuck with a 2 MT Mount		Go to amazon.com
	Magnetic Multi-Task LED Light with 30 Daylight LEDs 12 Mount-Anywhere Flexible Gooseneck Work Lamp with Magnet Base for Crafts, Sewing, Lathe, Drill press, Workbench		Go to amazon.com
	PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck		Go to amazon.com
	Shop Fox D4088 Lathe Attachment for Drill Press		Go to amazon.com
	KKmoon 100W Mini Beads Machine Miniature Lathe DIY Woodworking Buddha Pearl Lathe Grinding and Polishing Beads Wood Working DIY Lathe Polishing Drill Rotary Tool 12-24VDC		Go to amazon.com
	PSI Woodworking CSCPENCHK2 Large Dedicated Pen Blank Drilling Chuck		Go to amazon.com
	Utini LB-01 Mini Lathe Beads Machine Wood Working DIY Lathe Polishing Drill Rotary Tool DC 24V		Go to amazon.com
	PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For "C" Series PSI Lathe Chucks		Go to amazon.com
	Raitool LB-01 Mini Lathe Beads Machine Wood Working DIY Lathe Polishing Drill Rotary Tool DC 24V		Go to amazon.com

1. PSI Woodworking Products TM32 1/2-Inch Diameter Drill Chuck with a 2 MT Mount

Feature

Will hold drill bits up to 1/2-Inch in diameter
Drill chuck mounts in the 2 MT
Can be used in either the headstock or tailstock
Tightens with a chuck key for excellent grip
Removed easily with a knock-out bar

Description

#2 Morse taper mount for Delta, Jet, PSI, and other Midi lathe headstocks and tailstocks. A 1/2-Inch diameter 3-jaw mechanism can be used for securing small turnings or pen mandrels at the headstock, or a drill bit in the tailstock. Accepts a 1/4-20" draw bolt (not supplied) for safety. Will hold drill bits up to 1/2-Inch in diameter. Drill chuck mounted in the #2 MT can be used in either the headstock or tailstock. Tightens with a chuck key(included) for excellent grip. Removed easily with a knock-out bar.

2. PSI Woodworking Products TM32KL Keyless 1/2-Inch Drill Chuck with a 2 MT Mount

Feature

Will hold drill bits up to 1/2-Inch in diameter
Drill chuck mounts in the 2 MT
Can be used in either the headstock or tailstock
Tightens by hand without the need for a chuck key
Removed easily with a knock-out bar

Description

This PSI Woodworking #TM32KL Keyless 1/2-Inch Drill Chuck has a #2 MT mount, and will hold drill bits up to 1/2-Inch in diameter. It can be used in either the headstock or tailstock, and tightens by hand without the need for a chuck key. This product is perfect for drilling on your lathe. Just chuck the wood workpiece in the headstock and the drill bit in the tailstock, then feed the stationary drill into the spinning work. very simple. It is removed easily with a knock-out bar.

3. Magnetic Multi-Task LED Light with 30 Daylight LEDs 12 Mount-Anywhere Flexible Gooseneck Work Lamp with Magnet Base for Crafts, Sewing, Lathe, Drill press, Workbench

Feature

MAGNETIC MOUNT AND FLEXIBLE NECK The FAJ Multipurpose LED Light is the solution to all of your needs. Simply place the magnet on a metal surface and have the confidence that it will not slide nor move. The 12" flexible neck allows the light to be adjusted exactly to where you need it to be with no sagging or drooping. Simply set the light in its desired place and get to work!
VERSATILITY IN DESIGN The FAJ Multipurpose LED Light is easily attached and removed with its ultra-strong magnetic base. Whether being used on a sewing machine, drill press, lathe, or other metal surface, the light is sure to be secure. In addition, rest assured that the magnet will leave no permanent marks to remove or difficult clamp to detach and best of all no batteries to deal with.
COST EFFICIENT The FAJ Multipurpose LED Light is not only a multipurpose, functional light, it is a smart investment in savings. LED lights have shown to save upwards of 75% of traditional lighting costs. In addition to the savings, the life expectancy of LED lights can be upwards of 50x that of incandescent lights. Add light to your subject at the fraction of the cost.
ADD LIGHT TO YOUR SUBJECT The FAJ Multipurpose LED Light brightens your work surface so you can perform all of your projects easily without straining your eyes. With its clean, clear, crisp white light, The FAJ Multipurpose LED Light will illuminate even the darkest of work areas while guaranteed not to flicker, pulsate, or dim with use.
100% LIFETIME MONEY BACK GUARANTEE At FAJ, we stand behind our product and offer a 100%, lifetime money back guarantees for the lifetime of the product.

Description

Simply the BEST LED work sewing light Available Online - Premium Product at an AMAZING price!

Are your eyes tired?
Are you always looking for better lighting when doing your projects?
Do you wish to save money on your electric bill?
Would you like to find a light that is multifunctional, convenient and that your eyes will love ?
Then look no further...!

Included:
1x 30 bulb Led Light

Benefits:

Bright

Convenient

Multi-use

Stays in place

Portable

Energy saving

12" Long Gooseneck for Easy Adjustment

100% guaranteed

4. PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck

Feature

Mounts in a lathe without a Morse taper
Comes with a 1" x 8 tpi Headstock Mount
Precision 1/2" three jaw drill chuck
Includes a drill chuck key

Description

This 1/2" drill chuck can be mounted directly on the headstock spindle of your lathe. It is perfect for the lathe that does not have a morse taper mount. The precision chuck has a 1/2" x 20 tpi female thread, and comes with a chuck key, and an adapter to fit a 1" x 8 tpi spindle. The jaws will open to fit a 1/2" drill bit.

5. Shop Fox D4088 Lathe Attachment for Drill Press

Feature

Includes a base plate with live center, 12-Inch tool rest, mounting bolts, mini screw center and spur center
Fits all drill presses with a through hole in the table
Tool rest length: 12"
Maximum workpiece length: 24"
Maximum workpiece diameter: 6"

Description

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

6. KKmoon 100W Mini Beads Machine Miniature Lathe DIY Woodworking Buddha Pearl Lathe Grinding and Polishing Beads Wood Working DIY Lathe Polishing Drill Rotary Tool 12-24VDC

Feature

Specially designed for the home DIY enthusiasts, small and portable size with strong power.
Transparent organic dustproof glass cover with super convective cooling hole.
The welding line is covered with a full heat shrinkable tube.
With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
High quality aluminum alloy base and pure steel structure drill chuck.

Description

Specifications:
Material: Aluminum Alloy + Acrylic
Color: Silver
Plug Type: US Plug
Voltage: AC 100-240V 50/60Hz
Rated Voltage: 12-24V DC
Rated Power: 100W
Rated Speed: 1500-7000RPM
Power: 7 Level of Adjustable Speed
Processing Length: 140mm / 5.51in
Processing Diameter: 55mm / 2.16in
Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in
Swing Diameter: max 50mm / 2.0in
Grip Length: max 140mm / 5.51in
Matching Saw Blade Diameter: max 50mm / 2.0in
Machine Size: 325 * 65 * 70mm / 12.8 * 2.6 * 2.8in
Machine Weight: 1436g / 3.17 lb
Package Size: 37 * 14 * 14cm / 14.6 * 5.5 * 5.5in
Package Weight: 1734g / 3.82 lb

Package List:
1 * Mini Lathe Beads Machine
1 * Speed Control Power Supply (12-24V)
6 * Wood Carving Blade
1 * Screw Thread Fixed Needle
3 * Hex Shank Fixed Needle
1 * Collet Wrench
1 * Hexagon Wrench

7. PSI Woodworking CSCPENCHK2 Large Dedicated Pen Blank Drilling Chuck

Feature

Features a Reversible set of jaws that enables drilling blanks up to 2-1/2" square and 5" long
Weighs 2.35 lbs with 3.25" diameter. Pre-threaded to 1" x 8TPI.
Includes a set of tightening levers to open and close the jaws
Use the standard jaw position to drill from 1/4" to 1-1/2". reverse the jaws to drill from 1-1/2" to 2-1/2".
Two and a half times the capacity of our Original Dedicated Pen Blank Drilling Chuck (CSCPENCHK)

Description

With two and a half times the capacity of our Original Dedicated Pen Blank Drilling Chuck (CSCPENCHK), this large capacity chuck will let you drill bottle stopper blanks, project handles, and much more. The chuck features a reversible set of jaws that enables drilling blanks up to 2-1/2" square and 5" long. Use the standard jaw position to drill from 1/4" to 1-1/2". Reverse the jaws to drill from 1-1/2" to 2-1/2". Weighs 2.35 lbs with 3.25" diameter. Pre-threaded to 1" x 8tpi. Includes a set of Tightening Levers to open and close the jaws. Vary your headstock drilling speed to accommodate your specific blank and drill bit.

8. Utini LB-01 Mini Lathe Beads Machine Wood Working DIY Lathe Polishing Drill Rotary Tool DC 24V

Feature

Package Includes: 1x Utini LB-01 Mini Lathe Beads Machine | (Acrylic plates do not included) | 1x Power Adapter | 6x Wood carving set | 3x Hex shanks(1.5mm,2mm,2.5mm)
- High-precision, stability, low noise;
- Designed for the home DIY enthusiasts, small and portable, strong power;
- Transparent plexiglass shield, super convection cooling holes;
- Large torque ball bearing motor.

Description

Mini Lathe Beads Machine Video Show:
Specifications:
Brand: Utini
Model: LB-01
Material: Aluminum Alloy and Acrylic
Power: 80-100W
Voltage: 24V DC
Speed: 2000-8000 r / min, 7 grade speed
Size: 305* 58 * 65mm
The theoretical maximum turning diameter: 55mm
The theoretical maximum clamping length: 120mm
Chuck clamping range: 0.6-6mm
Power Adapter:
Input: AC110V- 240V~50/60Hz 1.5A max
Output:12/15/16/18/19V 4.5A max; 20/24V 4A max
Wire length:1.1m+1.1m
Features:
- High-precision, stability, low noise;
- Designed for the home DIY enthusiasts, small and portable, strong power;
- Transparent plexiglass shield, super convection cooling holes;
- Large torque ball bearing motor.
Precautions:
1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.
2.The speed can be adjusted in 4000-8000R, cut wood should not exceed 4000, grinding can use higher speed.
3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.
4.If not a cylinder, the speed should be reduced.
5.Tailstock bearing without lock tight.
6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.
7.If you do not really understand the operation, it is best to consult a professional person.
Package includes:
1x Utini LB-01 Mini Lathe Beads Machine
(Acrylic plates do not included)
1x Power Adapter
6x Wood carving set
3x Hex shanks(1.5mm,2mm,2.5mm)

9. PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For "C" Series PSI Lathe Chucks

Feature

Will hold a large variety of blank sizes depending on which chuck you attach these jaws.
Eliminates the need to purchase a separate new chuck for blank drilling.
Converts your existing chuck fast and easy.
Inexpensive and accurate.

Description

Do you already own a "C" series PSI lathe chuck? If so then these jaws will easily convert your PSI lathe chuck to a pen blank drilling fixture. These 2" long accessory jaws adapt to all PSI "C" series chucks: #CSC2000C, #CSC3000C, #CSC3000CTN, #CMG3C and #CUG3418C styles.

10. Raitool LB-01 Mini Lathe Beads Machine Wood Working DIY Lathe Polishing Drill Rotary Tool DC 24V

Feature

Brand: Raitool
Model: LB-01
Material: Aluminum Alloy and Acrylic
High-precision, stability, low noise
Honest Buy is the only authorized seller under Ologymart brand

Description

Mini Lathe Beads Machine Video Show:

Specifications:
Brand: Raitool
Model: LB-01
Material: Aluminum Alloy and Acrylic
Power: 80-100W
Voltage: 24V DC
Speed: 2000-8000 r / min, 7 grade speed
Size: 305* 58 * 65mm
The theoretical maximum turning diameter: 55mm
The theoretical maximum clamping length: 120mm
Chuck clamping range: 0.6-6mm

Power Adapter:
Input: AC110V- 240V~50/60Hz 1.5A max
Output:12/15/16/18/19V 4.5A max; 20/24V 4A max
Wire length:1.1m+1.1m

Features:
- High-precision, stability, low noise;
- Designed for the home DIY enthusiasts, small and portable, strong power;
- Transparent plexiglass shield, super convection cooling holes;
- Large torque ball bearing motor.

Precautions:
1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.
2.The speed can be adjusted in 4000-8000R, cut wood should not exceed 4000, grinding can use higher speed.
3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.
4.If not a cylinder, the speed should be reduced.
5.Tailstock bearing without lock tight.
6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.
7.If you do not really understand the operation, it is best to consult a professional person.

Package includes:
1x Raitool LB-01 Mini Lathe Beads Machine
(Acrylic plates do not included)

1x Power Adapter
6x Wood carving set
3x Hex shanks(1.5mm,2mm,2.5mm)

More Details:

Conclusion

All above are our suggestions for woodworking lathe drill. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using woodworking lathe drill with us by comment in this post. Thank you!