Top switch rcm tool
If you looking for switch rcm tool then you are right place. We are searching for the best switch rcm tool on the market and analyze these products to provide you the best choice.
Best switch rcm tool
1. NF Orange RCM Joy-Con Jig, Cochanvie RCM (Recovery Mode) Clip NS SX PRO OS Crack Tools RCM Clip Short Connector for Nintendo Switch Archive Modification (Not 3D-Printed Version, Better Quality)
Feature
1. Used to modify the archive, play the simulator such as GBA/FBA.2. RCM jig used for jail breaking the Nintendo switch.Easy to use and install.
3. This is not a paper clip jig, it's made with 24 AG wire.
4. Fully Compatable with Team Xecuter SX OS. No need to buy the dongle from xecuter.
5.Please feel free to contact us if you have any problems. We will handle your satisfaction, thank you.
Description
Features:Type:Switch Rcm Tool
Material:Plastic
Quantity:1 Pc
Description:
1. Used to modify the archive, play the simulator such as GBA/FBA.
2. RCM jig used for jail breaking the Nintendo switch.
3. This is not a paper clip jig, it's made with 24 AG wire.
4. Fully Compatable with Team Xecuter SX OS. No need to buy the dongle from xecuter.
5. Easy to use and install.
Notice:
Due to the different monitor and light effect,the actual color maybe a slight different from the picture color.
NF orange Statement:
NF orange provide various kinds of great products and quality service, we pay high attention to shopping experience and customer's suggestion, if any case you are unsatisfied, please contact us without hesitation, we will do our best to offer satisfactory solution.
Thank you for your support.
2. XBERSTAR New Improved SX OS 3D Printed for NINTENDO SWITCH Crack RCM NS Shorter JIG kits
Feature
Using SLA high-precision photosensitive resin, it is much more accurate than FDM, with an accuracy of 0.1mm.Using copper instead of a paper clip or bailing wire which is a far superior conductor and more malleable.
100% RCM, does not hurt the machine
Can be used to modify the archive, play the simulator such as GBA/FBA, the full version system is available
Material: ABS, ColorWhite
Description
Package Includes1 PC NINTENDO Switch RCM NS Shorter
3. Binmer(TM) Short Connector Circuit DN Paper Clip Jig for Nintendo Switch RCM Mode Kits Modify The Archive Play GBA/FBA
Feature
Li-ion Charger AL1115CV For Bosch Power Tools Battery 10.8V 12VLithium-Ion Battery Charger For Bosch.Code: 2607225146
100% Compatible with original manufacturer equipments and chargers
Charger For Bosch 10.8-Volt and 12-Volt Batteries
We ship the goods from China and it usually takes 7-23 working days to receive the package. Please be patient and contact us if you have any questions. We will reply to you within 24 hours.
Description
Specifications:
Plug Type: US Plug
Color: Black
Replacement For Bosch Battery
Input: AC 100-240V 50/60Hz
Output: 10.8V Max. 12V
Product Length: 145mm/5.71"
Cable Length: 1340mm/52.76"
Fit For BAT504,BAT411 BAT412 BAT413 BAT414
Note:
Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:
1 x Battery Charger
1xmanual
4. Coolayoung RCM Joy-Con Jig RCM Clip Short Connector, Plastic Cochanvie RCM (Recovery Mode) Clip NS SX PRO OS Crack Tools for Nintendo Switch Archive Modification
Feature
Materials: Plastic, Size: approx.1x0.4x0.2inch/2.5x1x0.5cm.RCM jig used for jail breaking the Nintendo switch.
Used to modify the archive, play the simulator such as GBA/FBA.
Fully Compatable with Team Xecuter SX OS. There is no need to buy the dongle from xecuter.
Please do not use excessive force to insert the item into the deviceand should stop to insert when feeling the resistance.
Description
Welcome to Coolayoung.
If you have any question, please contect us.
We'll try our best to help you.
Thank you very much!
Specifications:
Material: Plastic
Package Size: approx.1.4x1.4x0.7inch/3.5x3.5x1.8cm.
Note:
Please do not let your children put in their mouths.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!
Package list:
1 x RCM Jig
5. RCM Clip NS SX PRO OS Crack Tools RCM Clip Short Connector For Nintend Switch
Feature
100% Brand New And High Quality!Compatible with Nintend Switch
The short connector does not need to be inserted into the bottom!
RCM enters the black screen to indicate success!
Package include: 1 X Speaker Base Case
Description
RCM Clip NS SX PRO OS Crack Tools RCM Clip Short Connector For Nintend SwitchHow to use (the process is very long, you can enter the store to ask, the automatic reply has a connection introduction)
1. long press NS power button, pop-up menu select "power option",click "turn off". Turn NS off completely.
2.put the relevant system files into the TF card root directory.
3. Insert the short connector into the right hand handle slot.
4. Press and hold the NS "volume button +", do not let go.
5.Click on the "power button" of NS. Let go.(At this time, NS is still black screen and will not boot.)
6.The short is successful, at this time NS is in "RCM bootable mode".At this time, you can use computers, Android phones, dongle, etc.
Connect the data Cable at the bottom of the NS and inject the boot program through the data Cable.
Guide you to the TF card system, you can run a variety of homemade software, systems, games.
6. RCM Joy-Con Jig, Cochanvie RCM (Recovery Mode) Clip NS SX PRO OS RCM Clip Tool Short Connector for Nintendo Switch Archive Modification (ABS Material, Not 3D-Printed Version)
Feature
This product is a tool, specifically modify the use of homemade software such as playing games, you need to try it yourself.It can be used to modify the archive, play GBA / FBA and other simulators, the full version of the system is available, the homemade system can already load Switch games.
RCM (recovery mode) JIG for use with the Nintendo Switch. This design uses a thinner wire to reduce the chance of damaging the joycon terminals on the switch, don't waste money and risk breaking your joycon. Use this handy device to allow you to enter recovery mode on your switch.
Use with fail0verflow and Fuse Gele to install linux and custom firmware (in future) on your switch; Comes complete, tested and ready to go.
Note: This item does not need to be inserted heavily into the bottom, you could stop to insert when you feel the resistance from machine.
Description
Specfications:
* Product material: ABS plastic
* Product weight: 5g
* Product size: 2.5*0.9*0.4 CM
Main features:
* This product is a tool, specifically modify the use of homemade software such as playing games, you need to try it yourself.
* It can be used to modify the archive, play GBA / FBA and other simulators, the full version of the system is available, the homemade system can already load Switch games.
* RCM (recovery mode) JIG for use with the Nintendo Switch. This design uses a thinner wire to reduce the chance of damaging the joycon terminals on the switch, don't waste money and risk breaking your joycon. Use this handy device to allow you to enter recovery mode on your switch.
* Use with fail0verflow and Fuse Gele to install linux and custom firmware (in future) on your switch.
* Comes complete, tested and ready to go.
Note:
* This item does not need to be inserted heavily into the bottom, you could stop to insert when you feel the resistance from machine.
* It means success when RCM enters into the black screen display. Then you can extract the backup archive. Use the homemade software such as GBA arcade related simulator. This product can protect the golden finger of machine and can be used with more convenience.
Package included:
1 x RCM Clip Short Connector for Nintendo Switch (Red)
7. New Improved SX OS 3D Printed for Nintendo Switch Crack RCM NS Shorter JIG Kits
Feature
Using SLA high-precision photosensitive resin, it is much more accurate than FDM, with an accuracy of 0.1mm.Using copper instead of a paper clip or bailing wire which is a far superior conductor and more malleable.
Can be used to modify the archive, play the simulator such as GBA/FBA, the full version system is available
Material: ABS, ColorWhite 100% RCM, does not hurt the machine
Please feel free to contact us if you have any problems. We will handle your satisfaction, thank you.
Description
Package Includes 1 PC NINTENDO Switch RCM NS ShorterNF orange Statement:
NF orange provide various kinds of great products and quality service, we pay high attention to shopping experience and customer's suggestion, if any case you are unsatisfied, please contact us without hesitation, we will do our best to offer satisfactory solution.
Thank you for your support.
8. RCM Jig for Nintendo Switch Joy-Con RCM Clip Short Connector for NS Recovery Mode (Black)
Feature
1. RCM Jig for Switch. This is not a 3D-Printed paper clip jig2. Allows you to enter into RCM(Recovery Mode) on your Switch.
3. Can be used to modify the archive, play GBA / FBA and other simulators, the homemade system can already load Switch games.
4. Easy to use and install. Connect your RCM Jig to the Right-Hand Joycon rail of switch. Then hold VOL+ press the Power Button.
5. Material: ABS plastic, Size: 3.5 x 3.5 x 1.8 cm / 1.38 x 1.38 x 0.71 in, Weight: 6g
Description
The RCM Jig allows you to enter into RCM(Recovery Mode) on your Switch. It can be used to modify the archive, play GBA / FBA and other simulators, the homemade system can already load Switch games. It is compatible with NS/SX OS RCM Jig is easy to use and install. Connect your RCM Jig to the Right-Hand Joycon rail of switch. Then hold VOL+ press the Power Button.Specifications
Material: ABS plastic
Suitable: for Nintendo Switch RCM / NS SX OS
Size: 3.5 x 3.5 x 1.8 cm / 1.38 x 1.38 x 0.71 in
Weight: 6g
How to use RCM Jig?
1. long press NS power button, pop-up menu select "power option",click "turn off". Turn NS off completely.
2. Copy needed files to the root directory of your TF card
3. Connect your RCM Jig to the Right-Hand Joycon rail of switch.
4. Then hold VOL+ press the Power Button.
5. NS is still in black screen, but already enter into RCM.
6. Connet your NS and computers/Android phones/dongle and inject the boot program via the microUSB Cable.
7. Guide you to the TF card system, you can run a variety of homemade software, systems, games.
9. XBERSTAR DN paper clip for Nintendo Switch RCM / NS SX OS Short circuit tools
Feature
Can be used to modify the archive, play GBA/FBA and other simulatorsThe full version of the system is available, the homemade system can already load NS games.
Made of ABS plastic, Suitable for Nintendo Switch RCM / NS SX OS
Size: 3.5*03.5*1.8cm, Weight: 6 g
The shorts do not need to be inserted into the bottom! Feel the resistance.
Description
Package Includes1* Short circuit tools
1*Box
10. DN Paper Clip for Nintendo Switch RCM Tool RCM SX OS Short Circuit Tools Archive Modified Shorting Kits
Feature
RCM (recovery mode) JIG for use with the Nintendo Switch. This design uses a thinner wire to reduce the chance of damaging the joycon terminals on the switch, don't waste money and risk breaking your joycon. Use this handy device to allow you to enter recovery mode on your switch.This product is a tool, specifically modified to play games and other homemade software use.
It can be used to modify the archive, play GBA / FBA and other simulators, the full version of the system is available, the homemade system can already load Switch games.
for Nintendo Switch RCM / NS SX OS
Note: 1. The short connector does not need to be inserted into the bottom! 2. RCM enters the black screen to indicate success! 3. This item does not need to be inserted heavily into the bottom, you could stop to insert when you feel the resistance from machine.
Description
Product Descriptions:
1. This product is a tool, specifically modified to play games and other homemade software use.
2. Can be used to modify the archive, play GBA/FBA and other simulators.
3. The full version of the system is available, the homemade system can already load NS games.
Specifications:
Material: ABS plastic
Model: Red mold opening
Suitable: for Nintendo Switch RCM / NS SX OS
Size: 3.5 x 3.5 x 1.8 cm / 1.38 x 1.38 x 0.71 in
Weight: 6 g
Note:
1. The short connector does not need to be inserted into the bottom!
2. RCM enters the black screen to indicate success!
HOW TO USE:
1. The whole set of tools = short connector + card reader + TYPE C data cable (after purchasing a TF card to copy the game, then buy the os version to crack the game free game).
2. Long press NS power button, pop-up menu select "power option",click "turn off", Turn NS off completely.
3. Put the relevant system files into the TF card root directory.
4. Insert the short connector into the right hand handle slot.
5. Press and hold the NS "volume button +", do not let go.
6. Click on the "power button" of NS, Let go.(At this time, NS is still black screen and will not boot.).
7. The short is successful, at this time NS is in "RCM bootable mode". At this time, you can use computers, Android phones, dongle, etc.
8. Connect the data Cable at the bottom of the NS and inject the boot program through the data Cable.
9. Guide you to the TF card system, you can run a variety of homemade software, systems, games.
Packing List:
1 x RCM Short circuit toolsTool ONLY
1 x Box
Recent Comments