Top humidity sensor smartthings for 2024
If you looking for humidity sensor smartthings then you are right place. We are searching for the best humidity sensor smartthings on the market and analyze these products to provide you the best choice.
Best humidity sensor smartthings
1. Visonic MCT-340 E Wireless Door Window Temperature Sensor 2.4ghz ZigBee - Now Works Natively with Samsung SmartThings Hub
Feature
Monitor your windows and doors | Requires Samsung SmartThings Hub and SmartThings appThermometer feature reports temperature | Battery Life Expectancy: 3 years (for typical use)
Very small, thin form factor able to blend into the decor of most installations | Easy installation using high-strength 3M mounting tape (included)
Wide Gap performance able to be installed in tough situations where magnet gap is over 1" | Virtually unnoticeable, with sleek design
Operating Temperature 0C to 55C | Dimensions 66x25x10mm
Description
10/10/17 Update: Great News the Visonic MCT-340 E Wireless Door Window and Temperature Sensors are now natively supported by Samsung SmartThings for hassle-free connection to your SmartThings hub. Connect to your SmartThings hub simply by putting your sensor in discovery mode, searching for a new 'thing' on your SmartThings app, and pairing with the Visonic MCT-340 E. Complete sensor installation by following the mounting instructions found on the box and you're ready to get started.2. Samsung SmartThings Multipurpose Sensor [GP-U999SJVLAAA] Door & Window Sensor - Zigbee - White
Feature
Versatile Monitoring: All-in-one open/close, vibration, orientation, angle (tilt), and temperature sensor for multipurpose functionality24/7 Monitoring: Receive instant phone alerts if a door, window, cabinet or drawer opens unexpectedly
Stay Safe: Get a notification if you forgot to close your doors or windows to ensure your home stays safe
Requirements: Must have SmartThings App and SmartThings Hub or compatible device with SmartThings Hub functionality (connected devices sold separately)
Compatibility: Works with Google, Amazon Alexa, SmartThings, and Zigbee communication protocols
Description
The sleek multipurpose sensor detects open/close, vibration, orientation, and temperature allowing you to monitor several areas of your home. Place the multipurpose sensor anywhere to detect when drawers have been opened or closed to keep valuables safe. Receive instant alerts if someone is trying to rattle your door or open your window and detect abnormal temperature readings all with one little device.Recommended Placing - Place the hub in an open area well away from other devices transmitting and receiving 2.4GHz signals (like WIFI routers).
If the signal needs to penetrate walls or floors, sensors should be placed within 30 ft of the hub, or a device that can act like a ZigBee repeater (such as a SmartThings Outlet) should be placed between the two devices to boost the range.
Requires a SmartThings Hub or compatible device with SmartThings Hub functionality and SmartThings App. Free SmartThings app requires Android (6.0 or later) or iOS (10.0 or later). This device is compatible with the SmartThings ADT Security Hub, but is not compatible with ADT professional monitoring services.
Included: battery, mounting pads, screws, bracket, quick-start guide, and health and safety guide. 1 year Samsung SmartThings limited warranty.
Technical Details:
Power: 1 x CR-2450 battery
Communication Protocol: Zigbee
Range: 50-130 feet depending on your homes construction
Operating Temperature: 32 to 104F
Intended for indoor use only
*Compatible with previous versions of SmartThings Hubs including F-HUB-US-2, F-H-ETH-001, ET-WV520KWEGUS, ET-WV520BWEGUS, ET-WV530BWEGUS, and F-USB-US-M-1
3. ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 (Motion/Light / Temperature/Humidity)
Feature
4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.NEW IMPROVED VERSION: The included CR123A battery makes the sensor lasts much longer than the previous version. Updated motion detection allows you to get even quicker activity reports.
CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes (your hub needs to support advanced parameter input).
SECURITY FIRST: This sensor is equipped with bank-grade AES signal encryption. It's Z-Wave Plus certified to ensure it complies with the highest industry standards.
WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Almond (Securify), HomeSeer, Home Assistant, Hubitat, SmartThings Hub with custom device handler (contact seller for instructions), VeraEdge, VeraLite (running under UI7), and VeraPlus.
Description
- NOTE: This sensor is supported by open Z-Wave systems ONLY. It will not work with Wink or Z-Wave alarm panels.
- Model Number: ZSE40 VER. 2.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 1 CR123A battery (included)
- Z-Wave Range: Up to 100 feet line of sight
- Operating Temperature: 5-104 F
- Installation and Use: Indoor only
- Dimensions: 2.25" x 2.25" x 1"
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
- Model Number: ZMNHID3
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 110-230 VAC / 24-30 VDC
- Maximum Load: 10 A resistive load (no fans or motors)
- Output Circuit Power: 2300 W for 110-230 VAC / 240 W for 24-30 VDC
- Power Consumption: 0.4 W
- Z-Wave Range: Up to 130 feet line of sight
- Operating Temperature: 14-104 F
- Dimensions: 1.6" x 1.5" x 0.6"
- Weight: 1.7 oz
- Digital temperature sensor reporting range: -58 - 257 F
- Digital temperature sensor cord length: 3.3 ft
- Fibaro Home Center Lite
- HomeSeer
- Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions
- VeraEdge
- VeraPlus
- VeraSecure
- Z-Wave Me
- Zipato ZipaTile
Please contact seller if you're not sure your hub is compatible.
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to get readings from this sensor from Alexa.
Alexa-compatible Z-Wave hubs include:
4. Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Feature
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.2 year battery life
Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight.
Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera.
Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6s accuracy varies as little as 0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. Its built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. SPECIFICATIONS: Motion Sensor : 16 feet, and 120 field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77F; Temperature Sensor : 14F (-10C) ~ 140F (60C), accuracy: +/- 32.9F (0.5C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4F (-20C) ~ 140F (40C); Storing Temperature: -40F (-40C) ~ 176F (80C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.6 oz5. Samsung SmartThings Multipurpose Sensor
Feature
We recommend placing the hub in an open area well away from other devices transmitting and receiving 2.4GHz signals (like WIFI routers). If the signal needs to penetrate walls or floors, we generally recommend sensors be placed within 30 ft of the hub, or that a device that can act like a ZigBee repeater (such as a SmartThings Outlet) be placed between the two devices to boost the range. Temperature - 32 to 104 degree FThe versatile Multipurpose Sensor is an all-in-one sensor that can detect vibration, orientation and angle (tilt), temperature and when things open or close
Monitor secure areas of your home and be alerted if a door, window, cabinet or drawer opens unexpectedly
Get a reminder if you forgot to close your front door or garage door
Know the temperature in any room or location
Measurements (for combined sensor and magnet): 1.9 inches wide, 1.89 inches tall and 0.57 inches thick
Additional Requirements: Samsung SmartThings Hub
Range: 50-130 ft
Communication Protocol: ZigBee. Refer to the Trouble Shooting Steps available below in product description.
Description
The most versatile device in the Samsung SmartThings family, this sleek ZigBee device acts as a movement, vibration, orientation and temperature sensor all in one. The SmartThings Multipurpose Sensor can detect whether an object like a door or drawer is open or closed; sense when valuable or off-limits items have been moved or tampered with; offer temperature readings; and feel vibration. It requires the SmartThings Hub. SmartThings offers a one-year limited warranty on this product. TROUBLESHOOTING STEPS: > If your device doesnt connect after removing the "Remove to Pair" tab, hold the Connect button while inserting the battery. > Release the button when the LED is lit. > The LED will blink blue while attempting to connect. > Then select Connect New Device in the SmartThings app.NOTE: Check User Manual in Technical Specification before use.6. Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor
Feature
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box.
Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory.
Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera.
Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. A 6 in 1 Z-Wave Plus sensor, its perfectly small size hides the technology that powers real-time intelligence for your smart home. Designed and calibrated for precision, the accuracy of MultiSensor 6's sensors varies as little as 0.2%. In real-time and with real accuracy. MultiSensor 6 will measure MOTION, TEMPERATURE, HUMIDITY, LIGHT LUX, UV, and VIBRATION. Only 1.65 inches in size, can be installed in your home 4 different ways: on a shelf, in a corner, within a wall cavity, or on a wall as a beam sensor. And it can be powered 2 different ways: by batteries or via a USB cable and adapter. A part of Aeotec Gen5 range of Z-Wave products, MultiSensor 6 outperforms all that has come before it. It's built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. SPECIFICATIONS: Motion Sensor : 16 feet, and 120 field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77F; Temperature Sensor : 14F (-10C) ~ 140F (60C), accuracy: +/- 32.9F (0.5C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4F (-20C) ~ 140F (40C); Storing Temperature: -40F (-40C) ~ 176F (80C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA via USB cable or 2 x CR123A battery (1 CR123A battery included); Weight: 2.6 oz.7. Qubino Z-Wave Plus 110-230V or 24-30 VDC On Off Thermostat Module ZMNHID3 with External Temperature Sensor
Feature
SMART ON/OFF HVAC CONTROL: Add Z-Wave to your electric water heater, floor heating, electric radiators, or a hot water pump (compatible Z-Wave hub required, sold separately). Turn your hearing and cooling equipment on or off from your smart home app, Z-Wave remote control, scene controller, or a simple wall switch.EXTREME TEMPERATURE REPORTS: The included 3-foot digital sensor will send accurate temperature data to your Z-Wave hub. It's the widest reporting range for any Z-Wave temperature sensor: -58 - 257 F.
POWER IQ: Use it with 110-230 VAC electric heating systems and to monitor ambient temperature or connect the module to 24 VDC to get notifications about temperature drops in your pool or aquarium.
DIVERSE INSTALLATION: It's so small, it will easily fit behind any wall switch for convenient local control. The module adds to your system through auto-inclusion making the set-up quick and easy!
EXTRA FEATURES: Advanced configuration is available for expert users with open Z-Wave systems (parameter setting input required). THIS MODULE IS NOT SUPPORTED BY WINK, PIPER, OR ALARM PANELS (ADT Pulse, Vivint, Honeywell, Simon XT, and others).
Description
- SPECIFICATIONS:
COMPATIBLE HUBS:
Do NOT buy if your controller is not listed below. Contact Seller first.
DOES NOT WORK WITH WINK, PIPER, OR ALARM PANELS (ADT Pulse, Vivint, Honeywell, Simon XT, and others).
8. Monoprice Z-Wave Plus PIR Multi Sensor, Temperature - Humidity - Light
Feature
Motion Detection: This device uses a passive infrared sensor and sends a Z-Wave Plus signal when motion is detected within its detection range. It can detect moving objects within line of sight at distances up to 32 feet, away with a field of view up to 120.Temperature Detection: The sensor will automatically report the measured temperature whenever it changes by a particular amount. By default, it reports every time the temperature changes by 1C.
Humidity Detection: The sensor will automatically report the measured humidity level whenever it changes by a particular amount. By default, it reports every time the humidity level changes by 10%.
Light Detection: The sensor will automatically report the measured light level whenever it changes by a particular amount. By default, it reports every time the light level changes by 10%.
Z-Wave Plus is a low power mesh networking communications technology that allows Z-Wave Plus enabled devices to communicate with each other and to distribute Z-Wave Plus messages throughout the network.
Description
This passive infrared (PIR) sensor detects motion and sends a Z-Wave trigger signal to the network. It also features temperature, humidity, and light sensors, which will automatically report changes in the conditions and will report the absolute values when queried. It has a tamper-proof switch, which will trigger a Z-Wave signal when the cover is removed. These trigger signals can be used to activate various other devices and perform preprogrammed tasks. This is a security enabled Z-Wave Plus product and a security enabled Z-Wave gateway/controller must be used to fully utilize this sensor.9. Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor
Feature
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box.
Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory.
Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera.
Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. A 6 in 1 Z-Wave Plus sensor, its perfectly small size hides the technology that powers real-time intelligence for your smart home. Designed and calibrated for precision, the accuracy of MultiSensor 6's sensors varies as little as 0.2%. In real-time and with real accuracy. MultiSensor 6 will measure MOTION, TEMPERATURE, HUMIDITY, LIGHT LUX, UV, and VIBRATION. Only 1.65 inches in size, can be installed in your home 4 different ways: on a shelf, in a corner, within a wall or ceiling cavity using the provided Recessor accessory, or on a wall as a beam sensor. And it can be powered 2 different ways: by batteries or via a USB cable and adapter. A part of Aeotec Gen5 range of Z-Wave products, MultiSensor 6 outperforms all that has come before it. It's built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. SPECIFICATIONS: Motion Sensor : 16 feet, and 120 field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77F; Temperature Sensor : 14F (-10C) ~ 140F (60C), accuracy: +/- 32.9F (0.5C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4F (-20C) ~ 140F (40C); Storing Temperature: -40F (-40C) ~ 176F (80C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA via USB cable or 2 x CR123A battery (batteries not included); Weight: 2.6 oz.10. OUKU Xiaomi Aqara Temperature Humidity Sensor - MILK WHITE ZigBee Wireless Connection/Automatic Alarm/Detect Atmospheric Pressure
Feature
Wireless connection: ZigBee Real-time and historical records Multiple application: can connect to Aqara smart devices or other ZigBee devicesAutomatically alarm if the temperature, humidity and atmospheric pressure are abnormal Detects the temperature, humidity and atmospheric pressure condition
Powered by a CR2032 button cell ( included ) Please download APP "Xiaomi Smart Home" from the Apple Store or Google Play
Temperature detection range: -20 - 60 Deg.C ( + / - 0.3 Deg.C ) Humidity detection range: 0 - 100pct RH ( + / - 0.3pct ) Atmospheric pressure detection range: 30 - 110KPa ( + / - 120Pa )
NOTE: It should work with the Xiaomi multifunctional gateway remote control it can detect the real-time temperature,humidity and atmospheric pressure condition.
Description
The Xiaomi Aqara temperature humidity sensor can monitor the temperature, humidity and atmospheric pressure, and can either then make changes to the environment of sending a notification to your phone via the APP. With the ability of matching with other Xiaomi smart devices such as gateway remote control, smart outlet, versatile controller, etc. This sensor is able to help you create a smart home. What is more, this smart sensor is easy to control the temperature and humidity change by viewing the data according to historical records.Specification
Brand: Xiaomi
Model: Aqara
Material: Plastic
Color: Milk White
Package Contents
1 x Xiaomi Aqara Temperature Humidity Sensor
1 x Chinese User Manual
Power Supply:Button battery
Features:Smart, Hygrometer, Fahrenheit/Celsius Measurements
What's in the box:Body, User manual - Chinese
Total Batteries:1
Connection:Wireless
Material:Plastics
Type:Smart Switch
Instructions:Chinese
Recent Comments