Top gas valve flange ring for 2024
If you looking for gas valve flange ring then you are right place. We are searching for the best gas valve flange ring on the market and analyze these products to provide you the best choice.
Best gas valve flange ring
1. Decorative Log Lighter Gas Valve Flange Ring
Feature
Polished chromeDesigned for use with decorative flanges
Contrast colors or match colors for a custom look
Description
Can be attached to flanges to create contrasting colors. Can help fill up space if hole is too big for flange. No. DFR.01: Finish: Polished Chrome No. DFR.02: Finish: Polished Brass2. Skyflame 1/2 Inch Straight Gas Key Valve Kit for Fire Pit Fireplace with Flange and 3 Inches Key, Flat Black
Feature
For use with natural gas or liquid propane fuels; Rated at 150,000 BTU; 1/2 PSIHigh capacity flow for best flame performance, 1/2 inch inlet and outlet with standard female NPT threads
Includes Quarter-Turn Ball Valve (brass), 3 inch Key and Floor Plate Flange (flat black)
Ball valves are superior to globe valves for on/off control without pressure drop
Perfect for homemade fire pit, fire bowl, fire table, fireplace project so on, very easy to use
Description
Our 1/2 inch straight gas key valve kit is perfect for your gas fire pit or fireplace project. The valve is made of durable brass so that it can last whether installed indoors or outdoors. For use with up to 150,000 BTU of natural gas or propane. The included key promotes safety since without the key the valve cannot be operated. In addition, the valve utilizes standard 1/2 inch female national pipe thread on both its inlet and outlet so you shouldn't have any problem integrating it with your existing gas piping.The following are a few points for attention to the use of the product:
The main valve for the gas line supply must be in the closed position.
DO not use excessive torque on the gas valve during installation.
Screw the gas valve onto the threaded gas supply pipe. Make sure the gas valve is in the closed position.
Blow out all the grit, dirt or other foreign material from the gas supply line. Use a gas rated Teflon tape to seal all joints.
Run an air pressure test (2 PSI) on the system to test for leaks. Apply soap water to all the joints to signal any evidence of leakage. Turn on the main gas supply and retest for evidence of any gas leakage.
3. Stanbroil 1/2-Inch Straight Quarter-Turn Shut-Off Valve Kit for NG LP Gas Fire Pits with Polished Chrome Flange, 3-inch Key and 3/8 Male Flare x 1/2 NPT Fittings x 2
Feature
Straight gas shut off valve kit with standard quarter-turn ball valveRecommended for 90,000 BTU
1/2 inch inlet and outlet with standard female NPT threads
Chrome Flange and Brass Body for Long Life
We have Offer Two 3/8" Male Flared x 1/2 NPT Fittings for Your Convenience!
Description
Our Chrome keyed main shut off ball valve kit is what every indoor, outdoor fireplace and fire pit needs to be safe. Most codes require a shut off valve at the appliance so it is in reach in case of an emergency.Common sense also suggest that a shut off valve be within arms reach for emergencies. Our shut off ball valve is controlled by a key so when the key is not inserted in the valve it can't be operated.
This feature keeps small hands from accidentally turning on the gas. The chrome flange will provide a finished professional look to your project. It can be wall or floor mounted. With the valve body on one side of the structure insert the chrome flange and screw down until the structure is sandwiched between the valve and flange.
The 3/8 valve has 3/8 male flare fittings, the standard 1/2" valve has 1/2" NPT female threads
4. Stanbroil LP Propane Gas Fire Pit Burner Ring Installation Kit, Black Steel, 24-inch
Feature
Fire Pit Burner Ring Diameter 24-inchRing Burner Material: Durable 304# Stainless Steel, Female 1/2 Inch Gas Inlet, 296,000 BTU Max
Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit
Applicability: Propane (LP)
Package Contents: Round 24-inch Burner with 1/2 inch female Inlet includes inlet plug and wrench; Air mixer& fittings; Shut-off Valve Kit(Polished Chrome Flange & Key); 30 Inch Flex Gas Line; a 0-30PSI adjustable regulator x 48 inch braided hose; Installation Manual
Description
This product is a 24" Stainless Steel Double Fire Pit LP Propane Gas Burner Kit from Stanbroil factory.Fire Pit Rings are the quickest and most economical way to build a fire pit. Create the feeling of a world class resort in your own back yard with this Fire Pit Burner Rings. Enjoy the dancing warmth of a dramatic and luminous campfire flame while gathering around your fire pit with family and friends.
Fire pit rings are hand crafted from 100% 304 stainless steel and have been optimized for fuel distribution and natural flame production and 304 stainless steel material will remain trouble free in the outdoors. Fire rings kits are designed to be used only in an outdoor fire pit using propane fuels and also be used for gas logs, lava rock, fire glass etc.
Flame height is directly related to the BTU output of the unit. For maximum flame height, allow for BTU 296,000. Note:
We suggest this burner kit can be installed by a professional.
5. Stanbroil LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 12-inch
Feature
Fire Pit Burner Ring Diameter 12-inchRing Burner Material: Durable 304# Stainless Steel, Female 1/2 Inch Gas Inlet, 92,000 BTU Max
Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit
Applicability: Propane (LP)
Package Contents: Round 12-inch Burner with 1/2 inch female Inlet includes inlet plug and wrench; Air mixer& fittings; Shut-off Valve Kit(Polished Chrome Flange & Key); 18 Inch Flex Gas Line; a 1 PSI x 4 ft hose and Regulator; Installation Manual
Description
This product is a 12" Stainless Steel Double Fire Pit LP Propane Gas Burner Kit from Stanbroil factory.Fire Pit Rings are the quickest and most economical way to build a fire pit. Create the feeling of a world class resort in your own back yard with this Fire Pit Burner Rings. Enjoy the dancing warmth of a dramatic and luminous campfire flame while gathering around your fire pit with family and friends.
Fire pit rings are hand crafted from 100% 304 stainless steel and have been optimized for fuel distribution and natural flame production and 304 stainless steel material will remain trouble free in the outdoors. Fire rings kits are designed to be used only in an outdoor fire pit using propane fuels and also be used for gas logs, lava rock, fire glass etc.
Flame height is directly related to the BTU output of the unit. For maximum flame height, allow for BTU 92,000. Note:
We suggest this burner kit can be installed by a professional.
6. Onlyfire Square Stainless Steel Drop-in Fire Pit Burner Ring and Pan Assembly, 18-Inch
Feature
18'' square drop in pan assembly 12'' square burner, with 1/2 inch inlet in the middleRated BTU Max: 92,000; 1 1/4 flange on all sides for simple drop-in installation
Fuel distribution ports are precision drilled for smoother gas flow and better flame
Perfect square pan for DIY in your backyard
Outfitted for natural gas and propane (Propane: an air mixer valve must be installed)
Description
Complete your fire pit with Onlyfire Drop-in Fire Pit Burner Ring and Pan Assembly. Our product is made of 304 stainless steel in a brushed finish, is sure to provide long lasting durability.Perfect square pan for DIY in your backyard.The pan features weep holes to assist with water drainage to reduce the risk of burner or system damage, and also includes a welded nipple that connects the burner ring to the gas source. Gas fire pit pans are a crucial component to maintain the safety and construction of your fire pit - they help to support your burner ring, separate the air mixer from the fire pit media (for LP applications), and save money by reducing the amount of fire media you would otherwise need.
Fitting The Tray
The cut out required in the fire pit structure needs to be approximately 1/2 inch larger on all sides than the size of tray you are using. That will allow for an easy but secure fit, as the tray will be sitting securely on 1 inch of flange on all sides.
7. Decorative Log Lighter Gas Valve Flange Ring
Feature
Polished brassDesigned for use with decorative flanges
Contrast colors or match colors for a custom look
Description
"Blue Flame" Decorative Trim Ring Polished brass Designed for use with decorative flanges Contrast colors or match colors for a custom look8. Spotix Round Match Lit Natural Gas Fire Pit Penta Burner Kit, 12-Inch
Feature
12 inch penta burner kit for gas fire pit or fire feature304 Stainless Steel Construction; Female 1/2 inch gas inlet; Drilled Burner Ports
Natural Gas Ready; Propane Conversion Available (FPS-PENTA12KIT-LP-MSCB); 65,000 BTU
Includes penta burner; Polished Chrome Flange & Key; 1/2 Inch Shut Off Valve w/ Key; 12 Inch Flex Line; and Fittings
Penta; 12 inch diameter; 2.5 Inch Gas Inlet; 25 inch Flame Height
Description
Build your own custom fire pit with a unique look today using the penta burner. Included in this kit is everything you need to put together your match lit fire pit or fire table: penta burner, flex line, fittings, a valve and a polished chrome key with a flange. This fire pit burner kit is intended for natural Gas and features a 12" penta burner ring that is designed to deliver a very uniform and full flame from edge to edge, ideal for use with glass media! Burner holes are drilled not punched, at the 3, 9, and 12 o'clock position of the stainless steel tubing to allow for a broader flame as opposed to the conventional high-center flame given off by standard fire rings. Want to keep your flame on low? This is the ring for you; this ring will not exhibit the ring pattern that is seen with some concentric fire rings. The 1/2" hub on this ring is raised to allow for proper water runoff and is low profile requiring less media. Made from stainless steel, this fire ring will not rust, and is suitable for all outdoor environments. This fire ring should be installed by a licensed professional.9. Spotix Round Match Lit Propane Gas Fire Pit Penta Burner Kit, 18-Inch
Feature
18 inch penta burner kit for gas fire pit or fire feature304 Stainless Steel Construction; Female 1/2 inch gas inlet; Drilled Burner Ports
Propane Ready; Natural Gas Available (FPS-PENTA18KIT-NG-MSCB); 125,000 BTU
Includes penta burner; Polished Chrome Flange & Key; 1/2 Inch Shut Off Valve w/ Key; 12 Inch Flex Line; and Fittings
Penta; 18 inch diameter; 2.5 Inch Gas Inlet; 26 inch Flame Height
Description
Build your own custom fire pit with a unique look today using the penta burner. Included in this kit is everything you need to put together your match lit fire pit or fire table: penta burner, flex line, fittings, a valve and a polished chrome key with a flange. This fire pit burner kit is intended for propane (lp) gas and features a 18" penta burner ring that is designed to deliver a very uniform and full flame from edge to edge, ideal for use with glass media! Burner holes are drilled not punched, at the 3, 9, and 12 o'clock position of the stainless steel tubing to allow for a broader flame as opposed to the conventional high-center flame given off by standard fire rings. Want to keep your flame on low? This is the ring for you; this ring will not exhibit the ring pattern that is seen with some concentric fire rings. The 1/2" hub on this ring is raised to allow for proper water runoff and is low profile requiring less media. Made from stainless steel, this fire ring will not rust, and is suitable for all outdoor environments. This fire ring should be installed by a licensed professional. NOTE: Propane kits require the use of a fire pit pan (not included) for safe and proper use.10. Dreffco 3/8" Low Flow Chrome Keyed Main Shut Off Ball Valve for LP or NG Fire Pits
Feature
90K BTU Low Capacity 3/8" ValveKeyed for Safety
Chrome Flange and Brass Body for Long Life
3/8" Female NPT Threads Will Accept Any 1/2 Fittings. We Have Included Two 3/8" Male Flared Fittings For Your Convenience!
Recent Comments