Top electrostatic spray coating system for 2020

If you looking for electrostatic spray coating system then you are right place. We are searching for the best electrostatic spray coating system on the market and analyze these products to provide you the best choice.

Best electrostatic spray coating system

Product Features Editor's score Go to site
Mophorn Powder Coating Machine 50W 45L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 450g/min WX-958 Powder Coating System (50W 45L) Mophorn Powder Coating Machine 50W 45L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 450g/min WX-958 Powder Coating System (50W 45L)
Go to amazon.com
BestEquip Powder Coating Machine WX-101 40W 45L Capacity Electrostatic Powder Coating System with Spraying Gun 550g/min Electrostatic Machine (WX-101 40W 50L Capacity) BestEquip Powder Coating Machine WX-101 40W 45L Capacity Electrostatic Powder Coating System with Spraying Gun 550g/min Electrostatic Machine (WX-101 40W 50L Capacity)
Go to amazon.com
aftermarket Replacement electrostatic Powder Coating Spray Gun GEMA 02 Opti aftermarket Replacement electrostatic Powder Coating Spray Gun GEMA 02 Opti
Go to amazon.com
Hyper Smooth 02 LED Electrostatic Powder Coating System Hyper Smooth 02 LED Electrostatic Powder Coating System
Go to amazon.com
Portable Powder Coating System Paint Gun Coat Electrostatic Spraying Machine 5 Stage Adjustable Portable Powder Coating System Paint Gun Coat Electrostatic Spraying Machine 5 Stage Adjustable
Go to amazon.com
BestEquip Powder Coating Machine WX-958 50W 45L Capacity Electrostatic Powder Coating System with Spraying Gun 450g/min Electrostatic Machine BestEquip Powder Coating Machine WX-958 50W 45L Capacity Electrostatic Powder Coating System with Spraying Gun 450g/min Electrostatic Machine
Go to amazon.com
Techtongda Electrostatic Powder Coating Machine Spray Gun Paint System 110V(item# 251040) Techtongda Electrostatic Powder Coating Machine Spray Gun Paint System 110V(item# 251040)
Go to amazon.com
Portable Powder Coating Test Machine Test Gun Electrostatic Powder Coating Experiment System Paint Spray Gun 100kv Portable Powder Coating Test Machine Test Gun Electrostatic Powder Coating Experiment System Paint Spray Gun 100kv
Go to amazon.com
Bespick Powder Coating Machine, Powder Coating System Electrostatic Spray Paint Gun, with 5 Position Bespick Powder Coating Machine, Powder Coating System Electrostatic Spray Paint Gun, with 5 Position
Go to amazon.com
220V Electrostatic Spray Powder Coating System Machine 45L Spraying Gun Paint System 13.2 m/ h 220V Electrostatic Spray Powder Coating System Machine 45L Spraying Gun Paint System 13.2 m/ h
Go to amazon.com
Related posts:

1. Mophorn Powder Coating Machine 50W 45L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 450g/min WX-958 Powder Coating System (50W 45L)

Feature

Model Number:WX-958;Input Power : 50W;Stainless Steel Powder Hopper Capacity :55L
Output Current: 0~150uA;Input air pressure: 0-0.3Mpa;Output air pressure: 0-0.4Mpa;Output powder volume: Max. 450g/min
Fine coating effects and very stable quality, which is especially suitable for spraying complicated workpiece deep corners with very fine performance.
This electrostatic powder coating system with circuit protection, voltage self-adjusting function, to ensure a perfect spraying effect.
This WX-958 electrostatic powder coating equipment is widely used in the home appliances, hardware, security door (window), fins, architectural, auto parts, sports equipment, medical equipment, aluminum and other industries.

Description

Powder Coating System with Spraying Gun 450g/min WX-958 Electrostatic Machine

Introduction :

Electrostatic Powder Coating Machine is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded parts. The charged powder particles adhere to the parts and are held there until melted and fused into a smooth coating in a curing oven. Before coating, the parts to be coated are first pretreated similarly to conventional liquid coated parts. The pretreatment process is normally conducted in series with the coating and curing operatios.

Technical Data

Input Power : 50W

Input Power Voltage: 110V-120V AC

voltage of solenoid vavle:DC110V

Output power voltage: 0 ~100KV

Output Current: 0~150uA

Weight of Gun: 480g

Length of Gun Cable:4m

Stainless Steel Powder Hopper Capacity :45L

Work temperature range: -5C to 40C

Max. Air consumption: 13.2m/h

Input air pressure: 0-0.3Mpa

Output air pressure: 0-0.4Mpa

Application:Paint Tool Sets

DIY Supplies:Electrical

Powder coating applicable: All kinds of powder .

Machine color:Blue(main body)+Silver(Stainless steel hopper color)

Operating Instruction:

Connect all the connecting lines and air tubes.

Turn on switch of power supply (lighting indicator is on).

Press the switch of spray gun to adjust voltage required (set by individual, voltage recommended is 60KV-80KV).

Powder is placed into powder feeding barrel.

Press the switch of spray gun and adjust to high-voltage. Start work if the powder is sprayed.

2. BestEquip Powder Coating Machine WX-101 40W 45L Capacity Electrostatic Powder Coating System with Spraying Gun 550g/min Electrostatic Machine (WX-101 40W 50L Capacity)

Feature

Powder hopper capacity: 45L(Hopper is updated to stainless steel,easier to clean); Input power: 40W; Length of gun cable: 4m
Output powder volume: Max. 550g/min; Output current: 0-150uA; Input air pressure: 0-0.6Mpa; Output air pressure: 0-0.5Mpa
Powder coating machine is equipped with circuit protection and voltage self-adjusting function to ensure a perfect spraying effect
This electrostatic powder coating system is designed of two central gas to enhance the discharge effect and improve the rate of powder, so that the needle is no longer needle-guided fluid powder
Powder coating system is used for spraying workpieces with flat and smooth appearance and workpieces with no deep corner, applicable for all kinds of powder without the metals

Description

WX-101 40W 45L Capacity 550g/min Electrostatic Powder Coating System with Spraying Gun

This powder coating machine is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded partsis, is widely used in the home appliances, hardware, security door (window), fins, architectural, auto parts, sports equipment, medical equipment, aluminum and other industries

Features

High sensitivity and durability

With flat and smooth appearance and workpiece with no deep corners

Thickening resistance to puncture the tip, the low maintenance rate

Circuit protection and voltage self-adjusting function to ensure a perfect spraying effect

Two central gas design to enhance the discharge effect, improve the rate of powder

Rotating atomized air flow has greatly improved the coating quality

Large flow of pneumatic components, in the smaller air pressure, can still achieve higher powder

All stainless steel for powder cartridge, can not use tools to easily remove all parts and clean

High voltage module near the nozzle, low voltage loss, replaceable high voltage components to bring convenience to the maintenance

Used for spraying workpieces with flat and smooth appearance and workpieces with no deep corner

Powder coating applicable: All kinds of powder without the metals

Technical Parameters

Material of the bucket:Stainess steel

Mode: WX-101

Input Power Voltage: 110V-120V AC

Polarity: Negative

Input power: 40W

Powder hopper capacity: 45L

Length of gun cable: 4m

Output powder volume: Max. 550g/min

Output current: 0-150uA

Output air pressure: 0-0.5Mpa

Input air pressure: 0-0.6Mpa

Package Dimensions: 26.77x21.26x21.26inches

Shipping Weight: 60lbs

3. aftermarket Replacement electrostatic Powder Coating Spray Gun GEMA 02 Opti

Feature

International buyers please note: a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer's responsibility. We will try our best to reduce the risk of the custom duties. b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
aftermarket replacement electrostatic powder coating spray gun for GM 02 opti

Description

Introduction: 1.aftermarket replacement the electrostatice powder coating gun , use in the electrostatice powder coating machine , the product made in China .it fit to the GM02 opti electrostatice powder coating machine. 2. Package includes: 1.shell of electrostatice powder coating gun : 1 piece. 2. HV cascade : 1 piece. 3. wire (with 7 holes plug): 1 piece. 3.Air shipping : DHL/EMS/Fedex/TOLL express from China, 4.the air shipping days :7 -- 15 working days in normal conditions. International buyers please note: a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer's responsibility. We will try our best to reduce the risk of the custom duties. b.Please check with your country's customs office to determine what these additional costs will be prior to buying.

4. Hyper Smooth 02 LED Electrostatic Powder Coating System

Feature

100KV Adjustable w/ LED display
Face mounted gauge for powder feed adjustment
Includes a standard 1" nozzle, wide mouth multi-coat nozzle, flat spray nozzle
Includes 1 lb and 2 lb standard hoppers
30-Day Money Back Guarantee if not completely satisfied

Description

The HyperSmooth 02 LED is the first Powder Gun on Market that had adjustable KV Voltage from 0-100 that was under $1000.00. It is a workhorse and is known for not only durability but also very dependable and coats very well while still being economical for a professional powder gun. The HyperSmooth 02 LED is a very dependable gun and ideal for beginners who are looking for great results with first time use. Easily do multi-coats at an affordable price. Recommended User - Intermediate / Adjustable KV 1-100: Yes / Adjustable Amps: No / Digital Display: No / Air Gauge: Standard / Digital Pulsation Wave: No / Regulated Feed Air: Yes / Auxiliary Air: No / Gun: Standard Gun Dual Cup Compatible / Multi-Coat Nozzle Compatible: Yes / Nozzles: 1-1 Standard 1-Widemouth Multi-Coat 1-Flat Spray / Tips: 2-15mm Conical 2-20mm Conical / Hoppers: 1-1lb 1-2lb / Plugs & Hoses: 1-Hopper Pressure Hose 1-Ground Cable w/ clip 1-Latex Powder Hose 1-Powder Gun Power Cord

5. Portable Powder Coating System Paint Gun Coat Electrostatic Spraying Machine 5 Stage Adjustable

Feature

This coating machine is the Newest upgraded version with circuit board and the ignition coil are independent
It is a breakthrough refinishing system for the home hobbyist providing professional performance at a fraction of the cost of professional equipment
It produces a finish that is resistant to most chemicals, fuels, acids, thinners, brake fluid, UV light, and is much more durable than liquid coatings(up to ten times more durable than ordinary paint)
It produces no toxic wastes and uses no solvents, environmentally friendly
It blows it off with compressed air and recoat with the powder, cured powder coating can be recoated with powder and baked or touched up with paint, cured powder coating can be recoated with powder and baked or touched up with pain

Description

Portable Powder Coating System Paint Gun Coat Electrostatic Spraying Machine 5 Stage Adjustable

Application:
For home spraying DIY
Metal workpiece appearance spray molding

Feature:
This coating machine is the Newest upgraded version with circuit board and the ignition coil are independent
It is a breakthrough refinishing system for the home hobbyist providing professional performance at a fraction of the cost of professional equipment
It produces a finish that is resistant to most chemicals, fuels, acids, thinners, brake fluid, UV light, and is much more durable than liquid coatings(up to ten times more durable than ordinary paint)
It produces no toxic wastes and uses no solvents, environmentally friendly
It blows it off with compressed air and recoat with the powder, cured powder coating can be recoated with powder and baked or touched up with paint, cured powder coating can be recoated with powder and baked or touched up with pain

Parameter:
Input voltage: AC110V 60Hz
AMPS: 0.03A
Voltage output: 25KV+/-5KV
Require air supply: 10-15PSI, Dry Air 5cfm
Watts: 3.3W
Power code: 16AWG
Air inlet: 1/4" NPT Thread
Weight: 4kg
Package size: 41.5*28*22.5cm

Note:
Need to use the air compressor, the pressure at 0.5~1.2kg, 1.0kg pressure best
Before use, please read the instructions carefully

Include:
1 x Set of Powder Coating System

Fast shipping with DHL/EMS/FEDEX/UPS or other fast shipping service!

6. BestEquip Powder Coating Machine WX-958 50W 45L Capacity Electrostatic Powder Coating System with Spraying Gun 450g/min Electrostatic Machine

Feature

Powder hopper capacity: 45L(Hopper is updated to stainless steel,easier to clean); Input power: 50W; Length of gun cable: 4m
Output powder volume: Max. 450g/min; Output current: 0-150uA; Input air pressure: 0-0.3Mpa; Output air pressure: 0-0.4Mpa
Powder coating machine is equipped with circuit protection and voltage self-adjusting function to ensure a perfect spraying effect
This electrostatic powder coating system is designed of two central gas to enhance the discharge effect and improve the rate of powder, so that the needle is no longer needle-guided fluid powder
Powder coating system is used for spraying workpieces with flat and smooth appearance and workpieces with no deep corner, applicable for all kinds of powder

Description

WX-958 50W 45L Capacity 450g/min Electrostatic Powder Coating System with Spraying Gun

This powder coating machine is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded partsis, is widely used in the home appliances, hardware, security door (window), fins, architectural, auto parts, sports equipment, medical equipment, aluminum and other industries

Features

High sensitivity and durability

With flat and smooth appearance and workpiece with no deep corners

Thickening resistance to puncture the tip, the low maintenance rate

Circuit protection and voltage self-adjusting function to ensure a perfect spraying effect

Two central gas design to enhance the discharge effect, improve the rate of powder

Rotating atomized air flow has greatly improved the coating quality

Large flow of pneumatic components, in the smaller air pressure, can still achieve higher powder

All stainless steel for powder cartridge, can not use tools to easily remove all parts and clean

High voltage module near the nozzle, low voltage loss, replaceable high voltage components to bring convenience to the maintenance

Used for spraying workpieces with flat and smooth appearance and workpieces with no deep corner

Powder coating applicable: All kinds of powder

Technical Parameters

Material of the bucket:Stainess steel

Mode: WX-958

Input power voltage: 110V-120V AC

Input power: 50W

Powder hopper capacity: 45L

Length of gun cable: 4m

Output powder volume: Max. 450g/min

Output current: 0-150uA

Output air pressure: 0-0.4Mpa

Input air pressure: 0-0.3Mpa

Work temperature range: -5C to 40C

Package Dimensions: 23.62x19.29x18.9inches

Shipping Weight: 44lbs

7. Techtongda Electrostatic Powder Coating Machine Spray Gun Paint System 110V(item# 251040)

Feature

WX-101 Electrostatic Powder Coating Machine is our classical model, very fine in quality, but lowest price, which is used for spraying workpieces with flat and smooth appearance and workpiece with no deep corners.
Powder coating applicable: All kinds of powder without the metals.
Input Power Voltage: 110V-120V AC; Input Power : 40W
Output power voltage: 0 -100KV
Output current: 0-150uA

Description

WX-101 Electrostatic Powder Coating Machine 110V
Powder coating is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded parts.
The charged powder particles adhere to the parts and are held there until melted and fused into a smooth coating in a curing oven.
Before coating, the parts to be coated are first pretreated similarly to conventional liquid coated parts.
The pretreatment process is normally conducted in series with the coating and curing operatios.
Technical Data:
Input Power Voltage: 110V-120V AC
Input Power : 40W
Electromagnetic valve control power voltage : 24V DC
Input air pressure: 0-0.6Mpa
Output air pressure: 0-0.5Mpa
Max. Air consumption: 13.2m/h
Output powder volume: Max. 500g/min
Output power voltage: 0 -100KV
Polarity: Negative
Output current: 0-150uA
Gun Weight: 480g
Length of Gun Cable:4m
Powder Hopper Volume : 45L
Package Size: 69*58*54cm(27.17*22.83*21.26inch)
Package Weight: 29KG
Features:
WX-101 Electrostatic Powder Coating Machine is our classical model, very fine in quality, but lowest price, which is used for spraying workpieces with flat and smooth appearance and workpiece with no deep corners.
Powder coating applicable: All kinds of powder without the metals.
Item Included:
One Set WX-101 Electrostatic Powder Coating Machine 110V(251040)

8. Portable Powder Coating Test Machine Test Gun Electrostatic Powder Coating Experiment System Paint Spray Gun 100kv

Feature

This is a nice powder coating machine and nice price,we do not sell cheap things,they are garbage!I think you also need a nice quality machine,not a fake one.
Input voltage: AC220V Frequency: 50 / 60Hz Power: 40W Gun input voltage: 12V Gun output voltage: 0-100KV Temperature range: 0-40 degrees Input pressure: 0.2-1Mpa Powder out: 0-200g / min

Description

This is a nice powder coating machine and nice price,we do not sell cheap things,they are garbage!I think you also need a nice quality machine,not a fake one.
Input voltage: AC220V
Frequency: 50 / 60Hz
Power: 40W
Gun input voltage: 12V
Gun output voltage: 0-100KV
Temperature range: 0-40 degrees I
nput pressure: 0.2-1Mpa
Powder out: 0-200g / min

9. Bespick Powder Coating Machine, Powder Coating System Electrostatic Spray Paint Gun, with 5 Position

Feature

Power Coating System provides a premium coating ideal for many automotive, marine, home and garden applications.
The Powder Coating System is a breakthrough refinishing system for the home hobbyist providing professional performance at a fraction of the cost of professional equipment
It produces a finish that is resistant to most chemicals, fuels, acids, thinners, brake fluid, UV light, and is much more durable than liquid coatings(up to ten times more durable than ordinary paint
Powder coating is environmentally friendly! It produces no toxic wastes and uses no solvents
With the Powder, blow it off with compressed air and recoat. Cured powder coating can be recoated with powder and baked or touched up with paint

Description

Powder coating is a dry finishing process, using finely ground particles of pigment and resin that are generally
electrostatically charged and sprayed onto electrically grounded parts. The charged powder particles adhere to the parts and
are held there until melted and fused into a smooth coating in a curing oven. Before coating, the parts to be coated are
first pretreated similarly to conventional liquid coated parts. The pretreatment process is normally conducted in series with
the coating and curing operatios.

Specification:
1. Power requirements: Use a 110V AC power supply with a safety ground. The machine must be grounded when using.

2. Air source requirements: The compressed air pressure used must be between 0.5 and 1.2 kg. It is recommended to use 1.0 kg,
and the air pressure at this time is the most ideal.

3. Environmental requirements: well ventilated and dry.

4. Packing size: 41.52822.5 cm

5. Gross/net weight: 4/3.2kg

Package included:
1X Powder Coating Machine


Warning:
1. Because the machine generates high-voltage static electricity, the user must use the working place and the equipment to be
dry. In addition, the machine must be grounded safely. Do not unplug the grounding plug. This is important to protect the
machine and prevent electric shock. To avoid danger, discharge the needle to the grounding clamp after each use.

2. When the particles of plastic powder fall into the air, they will hit the fire source and there is a danger of burning and
explosion. Therefore, all hidden dangers must be eliminated and isolated from all sources of ignition. Do not use a vacuum
cleaner to remove the plastic powder on the ground. Wear a dust cover during work to protect your personal safety.

10. 220V Electrostatic Spray Powder Coating System Machine 45L Spraying Gun Paint System 13.2 m/ h

Feature

Power: 220v-240v AC
Working environment temperature: -5 -40
Maximum output current: 150uA
Maximum air consumption: 13.2m3 / h
Volume of powder barrel: 45L

Description

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you


Parameters:

Power: 220v-240v AC

Input power: 30W

Input voltage: Vp-p18v

Maximum output current: 150uA

Solenoid control voltage: DC24V

Maximum air consumption: 13.2m3 / h

Volume of powder barrel: 45L

Working environment temperature: -5 -40


Features

1. The machine voltage, current custom mode and plane parts, groove pieces, heavy sprinkler fixed mode in one, the first domestic technology, the use of imported original and advanced technology manufacturing,

2. Plane mode for round nozzle, good and efficient transmission, enhance the powder back to the package effect.

3. Groove parts for fan-shaped nozzle, the plane spray effect is excellent. Easy to spray deep groove, to overcome the Faraday shielding phenomenon, a strong penetration.

4. Repetitive mode is to ensure uniform and smooth, eliminate orange peel phenomenon, suitable for spraying low electrical conductivity of the work piece.

Conclusion

By our suggestions above, we hope that you can found the best electrostatic spray coating system for you. Please don't forget to share your experience by comment in this post. Thank you!

You may also like...