Top battery tester nimh
If you looking for battery tester nimh then you are right place. We are searching for the best battery tester nimh on the market and analyze these products to provide you the best choice.
Best battery tester nimh
1. ISDT BattGo BG-8S Battery Meter, LCD Display Digital Battery Capacity Checker Battery Balancer Battery Tester for LiPo/Life/Li-ion/NiMH/Nicd
Feature
Fully support Battgo technology,only with XT60i connected and you can get full knowledge on detail parameters on your battery.Support LiHv,LiPo,Lilon,LiFe,NiMh/Cd battery and BEC output measurements.
BG-8S uses XT60i connector which was jointly developed by ISDT and Amass.support BattGo technology,and highly compatible with original XT60 plugs.
Multi-functional, easy to carry, the official authentic quality assurance.
Understand the battery information essential items.
Description
Smart Battery CheckerExquisite and powerful BG-8S smart battery checker fully support BattGO technology.
Make Battery Smarter
Cooperating with BattGO technology, only with XT60i connected and you can get full knowledge on detail parameters on your batter. Easy to read cells voltage, battery circulations, working parameters and fast set to your preferred settings.
Auto Balancing Cells Voltage
Advanced auto balancing algorithm, make sure every cell is well balanced.
Powerful Portable Charging Function
Connecting to your battery, BG-8S can become your power bank for mobile devices. Support Qualcom QC 2.0/3.0, compatible with BC1.2 and Apple devices. Maximum output 12V/2A.
Receiver Signal Test and Protocol Analysis With standard 3 pin plug, BG-8S cab detect BEC output voltage. BG-8S also support multiple protocol analysis including PWM, PPM&S.BUS and etc. With future firmware upgrades more Protocol analysis will be supported.
Multiple Measurement Connections
Support XT60/XT60i, XH2.54 1-8s balance lead, XH2.54 3 pin, JST ETC to measure voltage. Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurements.
XT60i Meant for BattGo
BG-8S uses XT60i connector which was jointly developed by ISDT and Amass, support BattGO technology, and highly compatible with original XT60 plugs.
Specification
Input voltage 1s: 0.8V-15V
Input voltage 2-8S: 0.8V-4.8V
Battery cells: 1-8S
Voltage measurement accuracy: 0.005V @ 4.2V
Balancing cells accuracy: < 0.005V
Support USB charging: QC 2.0 / 3.0, BC1.2,
Maximum output 12V/2A
Support smart battery: Charging and discharging setting, read battery info and usage history.
Supported Batt. Type: LiHv (1-8S) / LiPo (1-8S) / LiFe(1-8S)
Lilon (1-8S) / NiMH/Cd(1-10S)
Display: 2.4Inch 320240 260,000 color IPS LCD
Dimension: 80 X 55 X 19mm
2. ZTS Mini Battery Tester (MINI-MBT) Bundle with Protective Soft Case for MINI-MBT Battery Tester
Feature
Tests 1.2v NiMH/NiCd rechargeable [AA, AAA, C, D], 1.5v alkaline [AA, AAA, C, D, N], 3v cylindrical lithium [CR123, CR2], 3.6v Li-Ion rechargeable [18500, 17650, 18650, RCR123A], 9v alkaline & carbon zincPatented high accuracy Pulse Load Test
Ideal for electronics, remotes, photo, smoke detectors, games, medical, and more
Requires 4AAA batteries (not included)
Description
Easy to use - no switches or settings Quickly and easily identify weak or failing batteries Patented high accuracy Pulse Load Test Ideal for electronics, remotes, photo, smoke detectors, games, medical, and more Made in U.S.A.3. HOMREE Waterproof Design DC 12V 24V 36V 48V 60V 72V 84V 96V Acid lead/Lithium polymer/Lithium iron phosphate/NiMH Battery Capacity Indicator DC12V-96V Digital LED Tester Voltmeter Monitor
Feature
Capacity digital LED Tester voltmeter , Supply voltage: DC6V-120V (maximum) , Test voltage: DC6V ~ 120V ; Work current:< 5-15mA (with backlight);Energy resolution:1%;Voltmeter accuracy :1%;Using temperature range: -20- 70C .Operating humidity:10-80%; External dimension:482921 mm; Hole Dimensions :45.526.5 mm.
With a shell, easy to use stand-alone or embedded in the panel on the product.
Display Mode:Battery +voltage,Battery +Percentage.
Note: This tester for Lithium and lead-acid batteries Universal ,the factory default setting for 24V lead-acid battery power and voltage cycle display,If you need to test other specifications can be re-set by yourself. By the way , if you need user manual , please send email for us,many thanks.
Description
Name: 2016 New Waterproof Design Battery Capacity LED Tester VoltmeterWork Current:< 5-15mA (with backlight)
Energy Resolution:1%
Voltmeter Accuracy :1%
Temperature: -20~70C
Humidity:10-80%
Black wire connect to negative, red to positive
External Dimension:482921 mm
Hole Dimensions :45.526.5 mm
With a shell, easy to use stand-alone or embedded in the panel on the product.
Display Mode:Battery +voltage,Battery +Percentage
Supply voltage: DC6-120V (maximum)
Test voltage: DC6 ~ 120V
How to use:
1. Push the button for about 3s until it shows "1-U" and release it. Push it again for 1s it shows "2-b" and release it. Push it again for another 1s it shows "3-c" and release it. Push it again for another 1s it shows "4-d".
2. When it shows "1-U", push the button for 3s then you can adjust the voltage admeasuring apparatus. Push it for a longer time, the voltage goes up. Then push it for another longer time, the voltage goes down. Do it again and again. To save and exit Automatically after the screen is twinkling.
3. When it shows "2-b", you can change the type of battery.
12V: 1pc 12V Lead-acid battery
3.7V: 1pc 3.7V Lithium polymer battery
3.2V: 1pc 3.2V Lithium iron phosphate battery
1.2V: 1pc 1.2V NiMH battery
4.When it shows "3-c", you can adjust the number of batteries.
Please refer to the following:
12V Lead-acid battery: 1-10pcs
3.7V Lithium polymer battery: 2-28pcs
3.2V Lithium iron phosphate battery: 3-32pcs
1.2V NiMH battery: 10-70pcs
5. When it shows "4-d", you can adjust the display mode. "V" is voltage mode. "%" is percentage mode. "V %" is voltage& percentage cycle mode.
Package include :
1 x Digital Battery Capacity LED Tester Voltmeter
4. Maximal Power FC999 Universal Rapid Charger with Battery Tester for Alkaline, RAM, Ni-MH, Ni-CD, AA, AAA, C, D, 9V Batteries
Feature
(Charger and Battery Tester Only, Battery not Included). It charges AA, AAA, C, D, 9V, Ni-MH (Nickel Metal Hydride), Ni-CD (Nickel Cadmium), RAM (Rechargeable Alkaline Manganese) and even Alkaline (previously Non-Rechargeable) batteries.Built with 8 bit microprocessor, it employs advanced RISC architecture with integrated converter and multi-channels high speed input/output ports to intelligently monitor and control the whole charge of battery in real time and prevent from overcharging.
It is also Built-In with negative delta V cut-off function and short-circuit protection
Easy to use - It has LED and LCD display so that the status of each battery's charging cycle can be easily seen and the sliding spring loaded negative pole makes inserting any type battery a breeze.
TESTED, CERTIFIED & GUARANTEED - Tested for capacity, quality and longevity. Backed with a 12-month extended warranty and lifetime support from our friendly and knowledgeable customer service.
Description
Maximal Power Universal Rapid Charger is a device equipped with the best available technology.It charges AA, AAA, C, D, N, 9V, Ni-MH (Nickel Metal Hydride), Ni-CD (Nickel Cadmium), RAM (Rechargeable Alkaline Manganese) and even Alkaline batteries which is previously non-rechargeable.
It is Built-In RISC architecture with a 8-bit microprocessor to intelligently monitor and control the charging cycle in each charging port for overcharge and short-circuit protections.
It is also built with the latest battery charging technology, "Negative Delta V" deletion to discharge Ni-CD batteries fully first, then recharges it automatically.
Once the battery is fully charged, a constant current trickle charge will keep the battery at optimum and auto shut off when fully charged.
5. La Crosse Technology 911-114 Portable Battery Tester
Feature
Test rechargeable and alkaline batteriesCondition indicator
Works on: aaa, aa, c, d, 9v batteries ni-mh and ni-cd batteries
Portable Tester
2-year limited warranty
Description
Don't throw away Good batteries. Test them first. The portable battery tested by La Crosse tests one battery at a time. Test rechargeable or alkaline batteries in the following sizes: AAA, AA, C, D and 9V, the compact size allows you to carry the tester with you on the go in a purse, camera bag, luggage or backpack. Simple operation: Insert 1 battery and press down on the tester to check battery strength.6. Universal Battery Charger Tester Anazlyer C3400 for Li-ion NiMH NiCd AA AAA C 18650
Feature
Charger Tester Analyzer For Li-ion (Lithium ion) NiMH or NiCd rechargeable batteries.Four indepentent channels can be programmed individually or all together. Charge, discharge, condition or analyze one to four Li-ion, NiMH or NiCd rechargeable batteries.
Back lighted LCD Digitally displays capacity, voltage, time elapsed and current. Five modes of operation for each channel: Charge: Discharge: Discharge Refresh: Charge Test: Quick Test:
Adjustable charging rate from 200 to 2000 mA. (1000 mA max 4 channels) Negative delta V (-dV) full charge detection for NiMH/NiCd. CC/CV for Li-ion rechargeable cells.
NiMH/NiCd sizes: AAAA, AAA, AA, A, C and SubC. Li-ion sizes: 10440, 14500, 14650, RCR123A (17340), 17500, 17670, 18350, 18500, 18650, 19670 (protected 18650), 25500, 26500, 26650.
Description
Take control of your batteries. Do you know how long that set of batteries will really last?? Is that battery still good?? Will this battery take a charge at all?? Answer those questions and take control of your batteries with the C3400.How long will this set of batteries last in my device?? The C3400 will test your cells for actual capacity, not just what is printed on the label. This charger will actually put your batteries through a charge/test cycle and then display exactly their tested capacity. No more guessing how good those batteries are. For nearly all Li-ion NiMH and NiCd consumer cylindrical cells.
NiMH/NiCd sizes: AAAA, AAA, AA, A, C and SubC.
Li-ion sizes: 10440, 14500, 14650, RCR123A (17340), 17500, 17670, 18350, 18500, 18650, 19670 (protected 18650), 25500, 26500, 26650.
For Li-ion (Lithium ion) NiMH or NiCd rechargeable batteries.
Four indepentent channels can be programmed individually or all together.
Charge, discharge, condition or analyze one to four Li-ion, NiMH or NiCd rechargeable batteries.
Back lighted LCD Digitally displays capacity, voltage, time elapsed and current.
Adjustable charging rate from 200 to 2000 mA. (1000 mA max 4 channels)
Five modes of operation for each channel: Charge: Discharge: Discharge Refresh: Charge Test: Quick Test:
Negative delta V (-dV) full charge detection for NiMH/NiCd. CC/CV for Li-ion rechargeable cells.
Adapter Power Supply input: 100 - 240 VAC, 50 -60 Hz.
Adatper Power Supply output: 12Vdc 3.0A.
Charge current: maximum 2000 mA. (1000 mA max all 4 channels)
Maximum discharge current 1000 mA (700 mA for NiMH/NiCd)
Maximum Charging Capacity 20,000 mAh
Operating Temperature: 0 to 40 deg C
Includes:
C3400 Charger
Wall Adapter Power Supply
Manual
7. CAMWAY Digital Battery Capacity Tester Battery Checker Controller LCD for LiPo LiFe Li-ion NiMH Nicd
Feature
Usage for: Lipo LiFe Li-ion NiMH NiCd BatteryDisplay Mode: Battery Cell Voltages, Total Voltages, Lowest Cell Voltage, Highest Cell Voltage Gap between Highest Cell Voltage and Lowest Cell Voltage, Remaining Battery Capacity(%)
Product Size: 8.5x5x1.7cm
Product Weight: 45g
High Quality, Safe and Durabl
Description
Specifications:1. Display Mode: Battery cell voltages, total voltages, lowest cell voltage, Highest cell voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%)
2. Usage for: Lipo LiFe Li-ion NiMH NiCd battery
4. Product Size:8.5x5x1.7cm
5. Product Weight: 45g
6. High quality, safe and durable
Package content:
1 x LCD Battery Capacity Voltage Checker
1 x Operating Instruction
8. FPVKing RC CellMeter-7 Digital Battery Capacity Checker Controller Tester for LiPo LiFe Li-ion NiMH Nicd
Feature
Use for lipo life li-ion nimh nicd battery.Applies to check the batteries.It's very handy to read your cell voltage.
High quality, safe and durable,tiny and compact,easy to figure out and to use.
Cell Number: NiCd / NiMH (4 - 7 Cells), Lithium Type (2 - 7 Cells).
Display Mode: Battery cell voltages,total voltages,lowest cell voltage, Highest cell voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%)
Description
Specifications:Dimensions (Length x Width x Height) : 84 x 50 x 16mm
Battery Type: NiCd / NiMH, Li-Po, LiFe, Li-ion
Cell Number: NiCd / NiMH (4 - 7 Cells), Lithium Type (2 - 7 Cells)
Input cells:
LIPO: 2-7 cells
LIFE: 2-7 cells
Li-lon: 2-7 cells
NiCd: 4-7 cells
NiMH: 4-7 cells
Total Voltage:
LIPO:
LIFE:
Li-lon:
NiCd:
NiMH:
Total cell battery capacity(0-99%):
LIPO:
LIFE:
Li-lon:
NiCd:
NiMH:
Individual Battery cell voltage:
LIPO:
LIFE:
Li-lon:
NiCd:
NiMH:
Lowest cell voltage:
LIFE:
Li-lon:
Li-lon:
NiCd:
NiMH:
Highest cell voltage:
LIFE:
Li-lon:
Li-lon:
NiCd:
NiMH:
Voltage Difference Between Highest and lowest cell voltages:
LIFE:
Li-lon:
Li-lon:
NiCd:
NiMH:
Display Mode:
-Battery cell voltages, Total voltages, Lowest cell voltage, Highest cell voltage.
-Voltage gap between Highest cell voltage and Lowest cell voltage, Remaining battery capacity (%).
-Press "TYPE" for 3 seconds until you hear 3 'Beep' sound ,the 'LiPo' will Blink and the 1S - 6S will Blink - shows Cell Balancing begins Balancing Mode.
-During Balancing Mode , the checker will give a bit warmer temperature .
Package :
1 piece of Version 2 Cellmeter-7 Digital Battery Balance Checker
1 piece of instruction paper
(LiPO Battery and cable in the picture are for illustration purpose and which are not included )
Note:our product have tested before shipping, if you have any problem, please contact with us at the first time, we will supply the best service for you
9. ZTS MINIMBT - Mini Multi-Battery Tester - For More Than 15 Battery Types
Feature
Brand: ZTS- MPN (Part No.): MINIMBT
- Battery Type: NiMH alkaline and lithium
- Display: 5 LEDs
- Length: 4 in.
Description
The ZTS Mini Multi-Battery Tester (Mini-MBT) provides a comprehensive means of testing more than 15 battery types. The Mini-MBT's microprocessor-based design makes battery testing simple - using a patented, high accuracy pulse load test. After a fully automatic test cycle, percentage of remaining battery capacity is indicated on the LED bar display. Battery types are clearly labeled next to appropriate contacts. There are no settings, and test results are easy to understand. Its small size makes it ideal for the gadget bag, toolbox, or home utility drawer. Negative test lead/probe conveniently stores in seam at side. Tests 1.5v alkaline (AA, AAA, C, D, N), 1.2v NiMH/NiCd, 3v photo lithium, and 9v alkaline. Uses 4 AAA batteries (not included). Advantage of Pulse Load Technology. Battery performance is very important in today's electronic devices. The Mini-MBT computes the battery's actual remaining power capacity using a 2-second pulse load test. This pulse load simulates the real power demand that batteries experience in a high drain electronic device. So battery performance is measured, not just voltage. The load is automatically disconnected, so testing will not harm or drain the battery. Made in U.S.A. Patents 6,823,274 and D515444.10. PS Power Fast LCD Battery Charger Tester Li-ion NiMH NiCd USB Power Bank Function AAA AA C D 18650
Feature
Multi-chemistry Battery Charger Li-ion NiMH NiCd. Test batteries for actual capacity with test function.Four independent charging slots. Can charge batteries in any combination of type or size.
USB Power Bank Function for charging phones, tablets etc. Up to 2.1A USB output.
Charge current selection for best charging, 500, 1000, 1500, 2000 mA charge rate.
Description
DC5000 Universal Battery Charger Tester:With USB Power Bank Function (Li-ion cells inserted)
AAA, AA, C, subC, D NiMH/NiCd
10350 to 26650 Li-ion cells
Insertable cell sizes:
Diameter: min. 8mm max. 33mm
Length: min. 32mm max. 70mm
Simple operation, insert a cell and the charger automatically detects cell type and starts charging at the default rate of 500mA. Or increase charge current up to 2000 mA if desired for fast charges. Charge current settings; 500, 1000, 1500, 2000 mA. Four independent charging channels can be used with any type or size of cell.
Discharge mode will discharge the cell at 500 mA and when discharge is completed display the measured discharge parameters; time and capacity.
Test mode will first fully charge the cell, then discharge the cell while measuring the discharge parameters, then fully charge the cell. When Test mode is completed the discharged parameters are displayed including discharged capacity.
Charger features:
LCD display with backlight:
Displays the charge status, capacity, voltage, charging current, operating time and internal resistance
Adjustable charging current:
500, 700, 1000, 1500mA
Microprocessor controlled: Automatic detection of battery chemistry ( Li-Ion and NiCd / NiMH ) and charging algorithms
Overheat protection:
Power Bank function USB charging socket: 5V / 21000mA max
Package contents:
Charger DC5000
Power Supply
Instruction manual
Technical details:
Charger for Li-Ion, Ni-MH, Ni-Cd batteries
Charge current: 2000mA max
Discharge current: 500mA
USB Power Bank Function 2.1A max (Li-ion cells)
Input voltage: 100-240 Volt
Recent Comments