Top 7 frsky s8r receiver
If you looking for frsky s8r receiver then you are right place. We are searching for the best frsky s8r receiver on the market and analyze these products to provide you the best choice.
Best frsky s8r receiver
1. FrSky S8R 8/16 Channel Receiver 3-axis Stabilization
Feature
Built-in 3-axis gyroscope and 3-axis accelerometer sensor moduleBuilt-in RSSI PWM output(0-3.3V)
Built-in battery voltage detection
Smart Port enabled
SBUS Port enabled
Description
The S8R is a FrSky X-series receiver with built in 3-axis stabilization. For conventional Fixed Wing and Glider Models it will support stabilization, automatic level, hover and Knife-edge flight modes, for Delta Wings or flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit the type of model and manipulate all these features via the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X series receiver if it is required.
Tip: Use the S8R with 3-axis stabilization as a slave receiver with the RB-10 to give you that extra peace of mind by buying you precious time to bring your model home.
Specification- Dimension: 46.4726.7814.12 mm (LWH)
- Weight: 14g
- Number of Channels: 8/16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS output)
- With RSSI PWM output on board: PWM voltage output(0-3.3V), 100Hz, 1500500us
- Operating Current: 120mA@5V
- Operating Voltage Range: 4.0-10V
- Operating Range: full range
- Gyroscope Measurement Range: 2000dps
- Accelerometer Measurement Range: 4g
- Firmware Upgradeable
- Compatibility: FrSky Taranis X9D Plus/X9E/X7/Horus X12S/XJT in D16 mode
2. FrSky S6R (6ch receiver with built-in 3-axis gyro and 3-axis acceleration) Receiver
Feature
Built-in a three-axis gyro and three-axis accelerometer sensor moduleWith RSSI PWM output (0~3.3V) on board
Built-in battery voltage sensor
Smart Port enable
Description
Specifications- Model Name:S6R(6ch receiver with built-in 3-axis gyro and 3-axis acceleration)
- Dimension:47.42*23.84*14.7(L*W*H)
- Weight:12.1g
- Number of Channel:6CH(1-6CH from conventional channel outputs)
- With RSSI output on board:PWM voltage output(0~3.3V),100HZ,1500500uS
- Operating Voltage Range:4.0-10V
- Operation Current:100mA@5V
- Operating Range:full range
- Gyro Measurement Range:2000dps
- Accelerometer Measurement Range:4g
- Frsky DFT/DJT/DHT in D8_mode
- Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D8 mode
- Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode
- S6R-EU only works with Frsky Taranis X9D Plus-EU/X9E-EU/Horus X12S-EU/XJT-EU in D16-EU mode
3. FrSky STK Tool for S.Port products Upgrading and S6R/S8R receivers Configuration
Feature
New ArrivalS.Port 1 (upper) - Monitor, receive and set the telemetry data for S6R/S8R receivers (with DIP switch to the upper side)
S.Port 2 (down) - Upgrade S.Port products (with DIP switch to the down side)
Description
S.Port 1 (upper) - Monitor, receive and set the telemetry data for S6R (with DIP switch to the upper side) S.Port 2 (down) - Upgrade S.Port products (with DIP switch to the down side) How to upgrade S.Port products Driver: http://www.frsky-rc.com/download/view.php?sort=Tool&down=160&file=Driver-Windows XP/7/8/Vista frsky_update_Sport.exe: http://www.frsky-rc.com/download/view.php?sort=Tool&down=115&file=Upgrade Lite-S.Port Telemetry Steps: Put the DIP switch to the down side connect the USB port of STK to the USB port of PC run "frsky_update_Sport.exe", match the COM port number to the one assigned by PC. Click "File" button and select FW version connect the 3-wire S.Port cable to the S.Port 2 of STK and S.Port of upgraded product After "device found, please click Download", then click the "Download" button to start the upgrade Exit the process by clicking "End" button after "Firmware is updated". Refer to S6R manual from FrSky website download section for how to monitor, receive and set the telemetry data: http://www.frsky-rc.com/download/index.php?sort=&cate_id=0&pro_id=1674. FrSky S.Port AirLink S Monitor the receiver sensor program and flash firmware to devices S6R/S8R
Feature
Upgrade S.Port devices, configureand monitor sensors in USB mode.Monitor the receiver/sensor,configuresensors in wireless mode.
Configure the parameters of the device(S6R/S8R)with PC software in USB mode.
Configure the parameters of the device(S6R/S8R)with PC software in wireless mode.
Description
he S.Port AirLink S is a connecting tool to help you program and flash firmware to devices such as the S6R/S8R. It can be used by inserting into the USB port of a PC and connecting to the S.Port of the device. Or it can be used wirelessly through Bluetooth which allows wireless S6R/S8R configuration and real time telemetry dashboard.
(At the moment the Free Link app is only available in the Apple Store.)
Specifications
- Dimension: 37.930.99.9mmLWH
- Weight:6g
- Operating Voltage Range: 4-15V
- Operating Current: 88mA@5V
5. iFlight 10pcs Plastic Protection Antenna Tube with Caps for FRSKY XM XM+ X4R X4RSB S6R/D Series/TF Series IPEX4 Receiver Antenna (Black)
Feature
Suit for FPV racing quadcopter frsky receiver 2.4g antenna line ipex4 antennaInsulation effect,keeping the antennas out of harm away while not breaking in a crash
Usually the receiver antenna is soft and fragile ,with the protection tube,you don't need to worry the propeller may cut down the antenna
It help making receiver antenna fixed proper angle to achieve best signal
Good strut for transmitter antenna, durable yet flexible
Description
SpecificationMaterial: plastic
Length:15cm (5.9inch)
Weight:0.8g
Outside diameter:3mm
inner diameter:1.5mm
Package Included
10pcs Antenna Tube
10pcs Caps
6. FrSky 2.4G Spare Antenna 150mm for X4R/ X4RSB/ S6R / S8R / G-RX8 / G-RX6 / RX4R / RX6R receivers
Feature
150mm Receiver Antenna for X4R / X4RSB/ S6R / S8R / G-RX8 / G-RX6 / RX4R / RX6Rsize: 150mm
connector: IPEX 4 connector
Description
150mm Receiver Antenna for X4R / X4RSB/ S6R / S8R / G-RX8 / G-RX6 / RX4R / RX6R
Specification:
- size: 150mm
- connector: IPEX 4 connector
7. MALCO S6R Seamer
Feature
Soft Touch, Non Slip Handle InsertUnique One-Hand operation Latch
Ergonomically Contoured Handles
Opening Maximizes Handle Leverage
Recent Comments