Top 2 recommendation proximity sensor transponder
Finding the best proximity sensor transponder suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best proximity sensor transponder
1. IZOKEE RFID Kit, MFRC RC522 RFID-RC522 RF IC Card Reader Sensor Module S50 13.56MHz RFID Smart Card RFID Chip Key Ring Mifare Arduino Raspberry Pi, 5pcs Extra Key Rings as Gift (5 Sets)
Feature
This RFID-RC522 module is based on the Philips MF522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips. Moreover, 25pcs Extra Key Rings as Gift!It is applicable for the users who need to design or manufacture the RF card terminal, for example, the development of access controls, electronic door locks or terminals for the time recording.
It is supported card types: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.
This module can be directly loaded into the various reader molds. It can be used with Arduino, Raspberry Pi and micro-controller.
The module uses a voltage of 3.3V. It can be connected communication with user's any CPU main-board through several lines of SPI interface; it can ensure stable and reliable work, and reader distance.
Description
"Just Choose IZOKEE: Your expert for Micro-Electronics! One-Stop-Shopping with Various Electronic Modules & Components! "IZOKEE RFID Kit, RFID-RC522 RF IC Card Reader Sensor Module with S50 Smart Card and Key Rings
About RC522 chip
- MFRC522 is a highly integrated read and write chip which is applicable to 13.56MHz contactless communications.
- It is a non-contact read and writer card chip, low voltage, low cost and small size, is a better choice for smart meters and portable handheld devices development.
- MF RC522 completely integrated in all types of 13.56MHz passive contactless communication methods and protocols.
- Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1 encryption algorithms, terminology validation MIFARE products.
- MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s.
- As a highly integrated 13.56MHz card reader new family of chips, there are many similarities between MF RC522, MF RC500 and MF RC530, but also have many differences. Communication between it and the host SPI mode helps to reduce the connection, reduce PCB board size and cost.
Item Specifications:
Operating current :13-26mA/DC 3.3V
Idle current :10-13mA/DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating Frequency: 13.56MHz
Read Range: 0 ~ 35mm (mifare1 card)
Size: 40mm60mm
Module interfaces SPI: Data transfer rate maximum 10Mbit/s
Package Included:
5 x RFID-RC522 Module
5 x S50 Blank IC Card
5 x S50 Key Ring
5 X Straight pins
5 X Curved pins
25 X Extra Key Rings
2. UEB 5x MFRC-522 RFID Radiofrequency IC Card Inducing Sensor Reader for Arduino
Feature
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip.Low-voltage, low-cost, small size of the non-contact card chip to read and write Smart meters and portable handheld devices developed better choice.
The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols
The MF522-AN module design circuit card reader, easy to use.
Low cost, and applies to the user equipment development.
Description
Features:MF RC522:
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip.
Low-voltage, low-cost, small size of the non-contact card chip to read and write Smart meters and portable handheld devices developed better choice.
The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols
14443A compatible transponder signals.
The digital part of to handle the ISO14443A frames and error detection.
Support rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products
MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s.
MF RC522 are similar to MF RC500 MF RC530 , but also have the characteristics and differences.
Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.
The MF522-AN:
The MF522-AN module design circuit card reader, easy to use.
Low cost, and applies to the user equipment development.
The reader and advanced applications development meet the user RF card terminal design/production needs.
This module can be directly loaded into the various reader molds, very convenient.
Specifications:
Operating Current :13-26mA/DC 3.3V
Idle Current :10-13mA/DC 3.3V
Sleep Current: <80uA
Peak Current: <30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50,mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
Environmental Operating Temperature: -20-80 degrees Celsius
Environmental Storage Temperature: -40-85 degrees Celsius
Relative humidity: relative humidity 5% -95%
Data transfer rate: maximum 10Mbit/s
Size: RFID-RC522 Module: approx.40 x 60mm/1.57 x 2.36'
Recent Comments