Top 10 yeti colster lid replacement for 2024
If you looking for yeti colster lid replacement then you are right place. We are searching for the best yeti colster lid replacement on the market and analyze these products to provide you the best choice.
Best yeti colster lid replacement
1. YETI Original Replacement Drain Plug DPT for Tundra & Roadie Coolers Leak-Proof
Feature
It's designed to drain when partially open without having to fully remove the plugThe cooler floor is channeled and recessed for easy draining
YETI Compatible Accessory
YETI Compatible Single Drain Plug
Description
Includes a single drain plug2. 2-Pack of Replacement Drain Plugs for Yeti Coolers - Ergonomically Improved Drain Plug compatible with Yeti's Line of Roadie, Tundra, and TANK Coolers
Feature
Improved design for drain plugs used on Yeti Roadie, Tundra Coolers, and TANK Ice BucketsThe BEAST replacement drain plugs improved finger knob design allows for much easier finger leverage to open and close the drain
BEAST drain plugs come in a 2-pack so you will always have a backup plug
The Leak-proof, rugged drain plugs allow your cooler to drain while only partially open
Description
Have you ever had an issue with trying to loosen or tighten the Yeti drain plug when its cold, wet or slippery? Not easy, is it? We would like to introduce BEAST Drain Plugs 2-pack, an ergonomically improved design for replacement plugs compatible with Yeti Roadie, Tundra coolers, and TANK Ice Buckets. The BEAST plug's improved finger knob design allows for much easier finger alignment to open and close the drain. It drastically improves the ability to easily open your cooler drain in all kinds of cold, wet or slippery conditions that the standard plug can not.3. 4more - 16 oz Can Adapter for Yeti Colster - BLK 3-Pack - Perfect for 16 oz. Monster Energy Drink cans! - PATENT PENDING - ADAPTER ONLY - 3PK
Feature
Patent Pending design is perfectly sized to snugly hold a 16 oz. can in your favorite 12 oz stainless koozie, like Yeti Colster, RTIC, and even Ozark Trail!Great for 16oz cans of Monster Energy Drink, Rockstar, Amp, and many other drinks, including Budweiser, Miller Light, even Pabst Blue Ribbon... You name it!
Testing has shown a temperature rise of less than 5F in an hour, when outside temps are over 90F!
Injection molded with a finish to match your top gasket and comes in various colors to personalize your drinking experience!
ADAPTER ONLY: Cooler assembly not included. When not in use, store in a cool dry place.
Description
Ever wanted to keep your 16 oz cans super cold in your Yeti Colster? Now you can! Patent Pending design is perfectly sized to snugly hold a 16 oz. can in your Yeti Colster! Great for 16oz cans of Monster Energy Drink, Rockstar, Amp, and many other drinks, including Budweiser, Miller Light, even Pabst Blue Ribbon... You name it! Injection molded with a finish to match your top gasket. Comes in various colors to personalize your drinking experience! ADAPTER ONLY - CAN COOLER NOT INCLUDED4. YETI Rambler Colster Replacement Gasket
Feature
Fits YETI Rambler Colster; works with traditional 12 oz. cans and bottlesThe Load-and-Lock Gasket secures your drink in place
Rambler Colster not included with the purchase of this replacement gasket
BPA-free; dishwasher safe
Available in black only
Description
Rambler Colster Replacement Gasket
TheLoad-and-Lock Gasket is BPA-free and dishwasher-safe. Store in a cool, dry place when not in use.
5. YETI Tundra Replacement Latches (2-Pack)
Feature
These latches are built to withstand the pounding an ATV dishes outLatches last for years on your YETI cooler
The latch keepers are molded directly into the cooler's body
Includes 2 Replacement Latches
Note: The following Tundra coolers have two (2) latches: Roadie, 35, 45, 50, 65, 75, 105, 110, 125, 160, 210, 250, 350, 420 Note: The following Tundra coolers have three (3) latches: 85, 120, 155
Description
T-REX ROADIE AND TUNDRA LID LATCHES
Recognize these latches from anywhere? If you own an ATV, you might. These latches are built to withstand the pounding an ATV dishes out, and they'll also last for years on your YETI cooler. Same goes for the latch keepers, which are molded directly into the cooler's body.
Note: The following Tundra coolers have two (2) latches: Roadie, 35, 45, 50, 65, 75, 105, 110, 125, 160, 210, 250, 350, 420
Note: The following Tundra coolers have three (3) latches: 85, 120, and 155
Quantity: 2 Replacement Latches
6. Can Cooler Drinking Lid
Feature
Turn your screw top insulated koozie into a cup! Just One Lid One Cup!Fits Yeti Colster
Fits RTIC Stainless Can Cooler
Fits Ozark Stainless Can Cooler
Fits Coors light Tall Skinny 12oz Cans.
Description
Turn your screw top insulated koozie into a cup Just One Lid One Cup! Can Cooler Drinking Lid7. 2 Pack New OEM Replacement Rubber Lid Seals for 14 or 30 Ounce Insulated Stainless Steel Tumbler Lids Such As Yeti RTIC Ozark Trail Mossy Oak Atlin Beast
Feature
Durable Rubber O-Ring for most major brands of 30 ounce stainless steel tumblersFits 14 or 30 ounce stainless steel tumblers from YETI and similar tumblers
Made to create a perfect seal between the lid and tumbler.
Simple and Easy to replace. Roll off the old rubber ring with your fingers and slide on the new ring
Replace that old, gunked up rubber ring with a new ring to give your cup that perfect seal!
Description
Throw away those old, gunked up rubber rings on your stainless steel tumbler and replace it with a new seal! This o-ring fits most major brands of tumblers such as Yeti, RTIC, Rooster6, Ozark Trail, and SIC. Simply pull off the old ring then stretch the new ring in its place and let it seat in the groove for a perfect seal. Each package contains two new seals. Lid sold separately. Due to variations in tumbler lids our seal may fit slightly differently than your original seal. These seals do not fit brands such as Thermos, Big Bubba, Contigo, Kleen Kanteen, or Hydroflask.8. 2-Pack of Replacement Lid Latches Compatible With Yeti Hard Coolers - Larger, More Durable, Ergonomically Improved Design That Fit on all Yeti Tundra and Roadie Coolers
Feature
DON'T JUST REPLACE YOUR YETI LID LATCHES, IMPROVE THE PERFORMANCE! - These 2-packs of BEAST Replacement Lid Latches makes the repetitive task of opening and closing your cooler lid easierWILL THEY WORK ON MY YETI???? - The BEAST Lid Latches are designed to be compatible with the Yeti lines of Tundra and Roadie hard coolers. Easily replaces the OEM lid latches utilizing the same pin
SAVE THE KNUCKLES! - We have designed a lid latch that will take less of a toll on your knuckles and fingers. The Beast Lid Latch is longer between the catch ball and t-handle to allow for more room for your fingers and knuckles to fit!
LATCHES THAT YOU CAN CLOSE WITH YOUR FOOT! - As shown in the product images, the BEAST lid latches are durable enough and large enough to push the t-latch in place using your foot. This saves the beating that your fingers and knuckles take from opening the lid 20 to 30 times a day
UNLIKE OTHER LID LATCHES, THESE COME IN A 2-PACK - All BEAST lid latches come in a 2-pack instead of selling a single latch. If one has broken, the next one won't be far behind so it's better to replace both!
9. YETI Hopper Replacement Shoulder Strap Fog Gray
Feature
Nylon webbing shoulder strap with shoulder padShoulder strap is detachable and fully adjustable
Replacement strap works with the Hopper 20, 30 or 41
Description
YETI Replacement Hopper Shoulder Strap - For the Yeti Hopper Soft Sided Cooler. A great strap to help spread the weight from your arms to your shoulders, and can free up your hands to carry more items.10. 2 Pack New OEM Replacement Rubber Lid Seals for 10, 12, 16, and 20 ounce Insulated Stainless Steel Tumblers Such Yeti RTIC Ozark Trail Mossy Oak Atlin Beast
Feature
Lid seals for YETI and RTIC Style tumblers.Durable Rubber O-Ring for most major brands of 10,12, 16 and 20 ounce stainless steel tumblers such as YETI, RTIC, Rooster6, Ozark Trail, SIC, HOGG, and Grid Gear. These Do Not fit Thermos Tumblers.
Made to create a perfect seal between the lid and tumbler.
Replace that old, gunked up rubber ring with a new ring to give your cup that perfect seal!
Easily remove the old ring and slide on the new ring in to the U-Channel on the lid
Recent Comments