Top 10 recommendation throttle body dodge for 2024
When you looking for throttle body dodge, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable throttle body dodge is not an easy task. In this post, we show you how to find the right throttle body dodge along with our top-rated reviews. Please check out our suggestions to find the best throttle body dodge for you.
Best throttle body dodge
1. 04891735AC Complete Electronic Throttle Body Assembly with IAC TPS for Dodge Avenger Caliber Journey Chrysler 200 Sebring Jeep Cherokee Compass Patriot Replace # 4891735AB 4891735AC 4891735AD
Feature
[Premium Quality]: TOP quality Electronic Throttle Body, solves internal electronic sensor failure and excessive wear and tear, redesigned electronic board features a new hall effect sensor for increased reliability and a longer service life. Sold as a complete unit, our replacement throttle body features a butterfly valve which is electronically controlled by the engine control unit (ECU) to precisely open and close to regulate the fuel/air mixture[Direct Fit]: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping
[Fitment/Compatibility]: Fit for 4-Cylinder 2011-2017 Chrysler 200, 2007-2010 Chrysler Sebring, 2009-2017 Dodge Journey, 2009-2014 Dodge Avenger, 2007-2012 Dodge Caliber, 2014-2017 Jeep Cherokee, 2007-2017 Jeep Compass, 2007-2017 Jeep Patriot, please check the fitment in the product description below
[Reference Part Number]: 04891735AC 4891735AC 4891735AA 4891735AD 977-025
[Buy with Confidence]: Order from MNJWS, we offer a LIFETIME warranty, true worry-free shopping experience
Description
Notice:After throttle body replacement or cleaning,the vehicle may need an idle relearn procedure.Please refer to the latest instructions provided by the factory vehicle service manual or technical service.
Instruction
1: Remove the air cleaner and duct hose assembly using a common screwdriver.
Disconnect the electrical connector on the MAF by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.
2: Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out.
Disconnect the throttle position sensor opposite the throttle cable levers.
3: Disconnect the throttle cables by turning the throttle lever on the throttle body all the way open by hand and then removing the now slackened cables from the throttle lever.
4: Remove the heated water hoses from the bottom of the throttle body if there are any.
Use a needle nose pliers to remove the clamps by squeezing the clamps and pulling them off.
5: Remove the four bolts running through the throttle body and into the intake manifold.
Use appropriate -inch drive socket and ratchet, lift the throttle body off the intake manifold.
Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused.
Install the new throttle body and components in reverse order of removal.
Fitment
2011-2017 Chrysler 200 1.8L 2.0L 2.4L
2007-2010 Chrysler Sebring 1.8L 2.0L 2.4L
2009-2017 Dodge Journey 1.8L 2.0L 2.4L
2008-2014 Dodge Avenger 1.8L 2.0L 2.4L
2007-2012 Dodge Caliber 1.8L 2.0L 2.4L
2007-2009 Dodge Caliber L4 110 1.8L 2.0L 2.4L
2014-2017 Jeep Cherokee 1.8L 2.0L 2.4L
2007-2017 Jeep Compass 1.8L 2.0L 2.4L
2007-2016 Jeep Compass 1.8L 2.0L 2.4L
2007-2017 Jeep Patriot 1.8L 2.0L 2.4L
2007-2016 Jeep Patriot 1.8L 2.0L 2.4L
2. Spectra Premium TB1038 Fuel Injection Throttle Body Assembly
Feature
Designed for the perfect fit every timeOriginal Equipment (OE) level reliability and function
Fit and road tested to ensure dependable real world performance
Designed as complete assembly with included position sensor
No core required
Description
Electronic throttle bodies are engineered, developed and rigorously tested to meet Original Equipment (OE) requirements.Spectra Premium electronic throttle bodies meet or exceed the performance of the original equipment they replace.3. Electronic Throttle Body Assembly with IAC TPS | for Dodge Avenger Caliber Journey Chrysler 200 Sebring Jeep Cherokee Compass Patriot | Replace # 04891735AC 4891735AC 4891735AB 4891735AD
Feature
THROTTLE BODY REPLACEMENT: You will get a fairly reliable and durable throttle body, features a butterfly valve which is electronically controlled by the ECU to precisely open and close to regulate the fuel/air mixture. Exactly OEM design to replace your defective engine throttle bodyPREMIUM QUALITY: Long life-span matters, that is why the body of our throttle actuator are crafted from reinforce material, features anticorrosion and heat resistance. Provides a redesigned electronic board which using new hall effect sensor for longer service life
FITSfor 4-Cylinder 2008-2014 Dodge Avenger 2.4L, 2009-2017 Journey 2.4L, 2007-2009 Dodge Caliber 1.8L, 2007-2012 Caliber 2.0L, 07-11 Caliber 2.4L | 2007-2017 Jeep Patriot & Compass 2.4L, 2016 Patriot & Compass 2.0L, 2014-2017 Cherokee 2.4L | 2011-2017 Chrysler 200 2.4L, 2007-2010 Chrysler Sebring 2.4L. Please check the fitment in the product description below
REPLACE OEM PART NUMBER: 04891735AC, 4891735AC, 4891735AA, 4891735AD, 977-025. The complete electronic throttle actuator has went through vehicle try-on testing to ensure this part conforms to product standards for durability and performance
12-MONTH WARRANTY: If the electric throttle control actuator fails, cracks, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND
Description
Fits the Following Vehicles:
2008-2014 Dodge Avenger 2.4L
2007-2009 Dodge Caliber 1.8L
2007-2012 Dodge Caliber 2.0L
2007-2011 Dodge Caliber 2.4L
2009-2017 Dodge Journey 2.4L
2016 Jeep Patriot 2.0L
2016 Jeep Compass 2.0L
2007-2017 Jeep Patriot 2.4L
2007-2017 Jeep Compass 2.4L
2014-2017 Jeep Cherokee 2.4L
2011-2017 Chrysler 200 2.4L
2007-2010 Chrysler Sebring 2.4L
Replaces Part Numbers:
04891735AC, 4891735AC, 4891735AA, 4891735AD, 977-025
Quality Guarantee:
12-Month Warranty
At ATRACYPART, we take pride in the quality of our products and in your satisfaction. If you have any problems, do not hesitate to contact us.
4. Electronic Throttle Body Assembly for 200 Avenger Caliber Journey Compass
Feature
1A Auto Lifetime WarrantyReference Number(s): 337-02184,4891735AC,977-025
Description
Specifications:
- Brand New
- 100% electrically tested prior to leaving the factory
- Direct replacement
- Built to strict quality control standards
Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.
Fits:
- 2007-10 Chrysler Sebring L4 2.4L Throttle Body Assembly
- 2007-12 Dodge Caliber Throttle Body Assembly
- 2007-16 Jeep Compass (MK) L4 2.0L Throttle Body Assembly
- 2007-16 Jeep Compass (MK) L4 2.4L Throttle Body Assembly
- 2007-16 Jeep Patriot (MK) L4 2.0L Throttle Body Assembly
- 2007-16 Jeep Patriot (MK) L4 2.4L Throttle Body Assembly
- 2008-14 Dodge Avenger Throttle Body Assembly L4 2.4L
- 2009-16 Dodge Journey Throttle Body Assembly L4 2.4L
- 2011-14 Chrysler 200 Throttle Body Assembly L4 2.4L
5. biosp Throttle Body Actuator Assembly 04861691AA For Dodge Chrysler OEM Throttle Body
Feature
part number: 4861691AA, 04861691AAFits 2005-2010 Chrysler 300 w/2.7L or 3.5L, 2007-2008 Pacifica w/3.5L or 4.0L, 2006-2010 Sebring w/2.7L or 3.5L, 2008-2010 Town and Country w/4.0L.
Fits 2006-2010 Dodge Avenger w/2.7L or 3.5L, 2009-2010 Challenger w/ 3.5L, 2006-2010 Charger w/2.7L or 3.5L,2008-2010 Caravan w/4.0L.
Fits 2008-2010 Dodge Grand Caravan w/4.0L, 2009-2010 Journey 3.5L, 2005-2008 Magnum w/2.7L or 3.5L, 2007-2011 Nitro 3.7L or 4.0L.
Please check for details before purchasing, to make sure this is the right part you need!
Description
BRAND NEW FITTING FOR THE FOLLOWING YEARS AND MODELS:CHRYSLER:
2005-2010 Chrysler 300 w/2.7L or 3.5L
2007-2008 Chrysler Pacifica w/3.5L or 4.0L
2006-2010 Chrysler Sebring w/2.7L or 3.5L
2008-2010 Chrysler Town and Country w/4.0L
DODGE:
2006-2010 Dodge Avenger w/2.7L or 3.5L
2009-2010 Dodge Challenger w/ 3.5L
2006-2010 Dodge Charger w/2.7L or 3.5L
2008-2010 Dodge Caravan w/4.0L
2008-2010 Dodge Grand Caravan w/4.0L
2009-2010 Dodge Journey 3.5L
2005-2008 Dodge Magnum w/2.7L or 3.5L
2007-2011 Dodge Nitro 3.7L or 4.0L
6. Dodge Ram 1500 2500 3500 5.7L Throttle Body Mopar OEM
Feature
Ram 1500 from 2005-2012 Ram 2500 from 2005-2012 Ram 3500 from 2006-2012 Dodge Durango from 2005-2009 Chrysler Aspen from 2007-2009Description
Genuine Mopar throttle body/bellcrank for 5.7L HEMI Engines.7. APDTY 112542 Throttle Body IAC Idle Air Control TPS Actuator Assembly Fits 4-Cylinder 07-10 Sebring 2007-2014 Chrysler 200 or Dodge Avenger 07-2012 Caliber 09-15 Journey 07-16 Jeep Compass or Patriot
Feature
Complete Throttle Body AssemblyIncludes New Throttle Actuator
Includes IAC Idle Air Control
Includes TPS Throttle Position Sensor
Exact OE Fit Form & Function
Description
Brand New Throttle Body AssemblyIncludes Throttle Actuator, IAC (Idle Air Control), TPS (Throttle Position Sensor)
Fits 2007-2014 Chrysler 200 (4-Cylinder Engine)
FITS 2007-2010 Chrysler Sebring (2.4L 4-Cylinde Engine)
Fits 2007-2014 Dodge Avenger (4-Cylinder Engine)
Fits 2007-2012 Dodge Caliber (4-Cylinder Engine)
Fits 2009-2016 Dodge Journey (4-Cylinder Engine)
Fits 2007-2016 Jeep Compass (4-Cylinder Engine)
Fits 2007-2016 Jeep Patriot (4-Cylinder Engine)
Replaces 04891735AC, 4891735AC, 4891735AD
8. Throttle Body Assembly for Jeep Dodge Ram Chrysler Grand Cherokee Liberty 3.7L 4861661AB 4861661AA
Feature
Replacement Part Number: 4861661AB 4861661AAFits for Jeep Dodge Ram Chrysler Grand Cherokee Liberty 3.7L (Please see below description for more details)
Directly replace the broken one and easy installation
Welcome to contact us for anything. Thank a lot.
Please confirm the part number and vechile models before order.
Description
I. Aftermarket Replacement No.:4861661AB
4861661AA
II. Use for the following Vehicles :
2007-08 Chrysler Pacifica Throttle Body Assembly V6 3.8L
2007-10 Dodge Dakota Throttle Body Assembly V6 3.7L
2007-09 Dodge Durango Throttle Body Assembly V6 3.7L
2007-11 Dodge Nitro Throttle Body Assembly V6 3.7L
2007-10 Dodge Ram 1500 Truck Throttle Body Assembly V6 3.7L
2007-10 Jeep Commander (XK) Throttle Body Assembly V6 3.7L
2008-10 Jeep Grand Cherokee Throttle Body Assembly V6 3.7L
2007-12 Jeep Liberty Throttle Body Assembly
2007 Jeep Wrangler Throttle Body Assembly
2007 Mitsubishi Raider Throttle Body Assembly V6 3.7L
2008 Mitsubishi Raider Throttle Body Assembly
2011-12 Ram 1500 Truck Throttle Body Assembly V6 3.7L
2011 Ram Dakota Throttle Body Assembly V6 3.7L
9. BBK 1843 90mm Throttle Body (13-16Dodge 5.7L/6.4L Hemi)
Feature
Manufactured from brand new CNC machined 356 Aluminum HousingFitted with the highest quality components and brand NEW Factory OEM Electronic throttle controls
Installation a true bolt on with no modifications
Description
The BBK engineers have designed a great simple bolt on 85mm or 90mm throttle body that will increase airflow for better throttle response and increased horsepower and torque - how about an additional 12-24 Horsepower on any 2013-2017 Dodge 5.7L or 6.4L Hemi application without sacrificing mileage or drive ability..10. Superfastracing Complete Throttle Body With IAC Idle Air Control TPS Actuator Assembly For Chrysler 200/Sebring Dodge Journey/Avenger Jeep Cherokee/Patriot Replace 04891735AC 4891735AB 4891735 977-025
Feature
High Function: TOP quality Electronic Throttle Body, solves internal electronic sensor failure and excessive wear and tear, redesigned electronic board features a new hall effect sensor for increased reliability and a longer service life. Sold as a complete unit, our replacement throttle body features a butterfly valve which is electronically controlled by the engine control unit (ECU) to precisely open and close to regulate the fuel/air mixtureComplete Throttle Body Assembly : Includes Throttle Actuator, Idle Air Control and Throttle Position Sensor.
Fitment: Fit for 2011 - 2017 Chrysler 200 2.4L; 2009 - 2017 Dodge Journey 2.4L; 2007 - 2017 Jeep Patriot 2.0L 2.4L; 2007 - 2017 Jeep Compass 2.0L L4 2.4L; 2007 - 2012 Dodge Caliber 2.0L; 2007 - 2012 Dodge Caliber 2.4L 2.0L 1.8L; 2007 - 2010 Chrysler Sebring 2.4L; 2008 - 2014 Dodge Avenger 2.4L; 2014 - 2017 Jeep Cherokee 2.4L.
Reference Part Number: 04891735AC 4891735AC 4891735AA 4891735AD 977-025
Shipping: Ships from NJ or CA,United States.
Description
Item DescriptionBrand New Electronic Throttle Body Assembly
This Throttle Body is manufactured and tested to the strictest OE standards for unparalleled performance.
Built for trouble-free ownership and 100% visually inspected and quality tested.
This Throttle Body is backed by our 100% satisfaction guarantee.
100% electrically tested prior to leaving the factory
Direct replacement,100% factory test
Top quality Aftermarket part
Professional Installation is Highly Recommended
No Instruction Included
How to Replace Throttle Body:
Step 1: Remove the air cleaner and duct hose assembly using the common screwdriver. Disconnect the electrical connector on the mass air flow by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.
Step 2: Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out. Disconnect the throttle position sensor opposite the throttle cable levers.
Step 3: Disconnect the throttle cables by turning the throttle lever on the throttle body all the way open by hand and then removing the now slackened cables from the throttle lever.
Step 4: Remove the heated water hoses from the bottom of the throttle body if there are any (this is vehicle dependent). Use the needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Pull the hoses off. Not all vehicles have these, although there are a few that do.
Step 5: Remove the four bolts running through the throttle body and into the intake manifold. Use appropriate -inch drive socket and ratchet. Lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body and components in reverse order of removal.
Recent Comments