Top 10 recommendation dust collection hood 4
When you looking for dust collection hood 4, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable dust collection hood 4 is not an easy task. In this post, we show you how to find the right dust collection hood 4 along with our top-rated reviews. Please check out our suggestions to find the best dust collection hood 4 for you.
Best dust collection hood 4
1. POWERTEC 70151 Dust Hood Rectangular Funneled Shape, 4-Inch By 10-Inch
Feature
Perfect solution when a smaller rectangular dust hood is neededCan be placed in multiple positions
Durable, long-lasting ABS plastic material construction
Port attachment measures 4"
Rectangular hood is 10-Inches across
Description
The POWERTEC rectangular tapered hood's compact, rectangular design is ideal for bench-top operations and is the perfect solution when a smaller rectangular dust hood is needed for your dust collection system. Create a cleaner, healthier shop environment with this essential component. Can be placed in multiple positions.2. POWERTEC 70150 Rectangular Dust Hood for 4-Inch Hose
Feature
4-Inch opening for hose or pipePre-drilled mounting holes
Durable, long-lasting ABS plastic material construction
Best if used with hose clamp (not included)
Hood measures 4-1/4-Inch x 7-Inch. 4-Inch nominal end measures 3-31/32-Inch O.D. and 3-39/64-Inch I.D.
Description
The POWERTEC Rectangular Dust Hood is the perfect solution when a smaller rectangular dust hood is needed for your dust collection system. Easy to install and high performing, this handy accessory will optimize the suckage of dust, debris and chips out of your shop and into your dust-collector. Pre-drilled mounting holes make for easy and secure installation. Create a cleaner, healthier shop environment with this essential component. Hood measures 4-1/4-Inch x 7-Inch. 4-Inch nominal end measures 3-31/32-Inch O.D. and 3-39/64-Inch I.D.3. 13.5" x 7" x 6" Deep ABS Plastic Dust Hood with 4" OD Opening for Dust Collector Systems 73479
Feature
These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced.Built in screen to filter out large chips
Overall size is 13.5" x 7" x 6" deep
Opening is 3.800" and tapers to 3.970" OD and will accept 4" flexible hose via hose clamp or tapered quick connect fitting
4 each 3/8" mounting holes and 3 each 1/2" square homes on one long edge to allow clamping to table
Description
These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. The opening will accept a 4" flexible hose using a hose clamp or tapered a quick connect fitting. These ABS plastic dust ports are very economically priced to allow you to outfit your dust collection system for maximum performance. These fittings are made from 1/8" thick ABS abrasion resistant plastic and are designed to withstand the abrasive nature of wood chips and saw dust. Due to the potential for built up of static electricity, it is recommended that all dust collection systems with plastic fittings be properly grounded.4. POWERTEC 70102 8-1/2-Inch Jointer Dust Hood, 8-1/2-Inch by 10-1/4-Inch by 4 Inch
Feature
Designed to mount over the chip chute of most jointers in today's marketTough, durable ABS plastic material
Overall size: 8-1/2-Inch width by 10-1/4-Inch length by 4-Inch diameter
4-Inch nominal end measures 3-13/16-Inch O.D. and 3-41/64-Inch I.D.
4-Inch end connect to standard 4-inch flexible hose
Description
The POWERTEC Jointer Dust Hood mounts easily over the chip chute of most jointers on today' s market. This essential dust-collection accessory ensures maximum dust and debris suckage. You can depend upon its durable construction and versatility to assist in, and optimize, your dust collection system. Breath, work and enjoy your hobbies in a fresh, clean environment with this ideal dust-collection accessory.5. POWERTEC 70132 14-Inch Table Saw Dust Hood
Feature
Effectively seals, ensuring optimum air quality and shop cleanlinessEasily and firmly secures to most of the table saws on the today's market
Outer size: 14-1/16" x 14-1/16"
Outlet diameter: 4"; Flange: 3/4" wide
Tough, durable ABS plastic material
Description
The POWERTEC Table Saw Hood effectively seals, ensuring optimum air quality and shop cleanliness! Easily and firmly secures to most of the table saws on the today's market! Also can be used on other machines that are size compatible. A convenient and versatile tool for shop and home woodworkers alike.6. POWERTEC 70183 4-Inch 45 Degree Elbow
Feature
45-degree elbow for connecting two hoses or pipes at an angleTough, durable ABS plastic material
Provides a multitude of applications
Provides airtight friction fit
Both 4-inch nominal ends measure 3-57/64-Inch O.D. and 3-21/32-Inch I.D.
Description
The POWERTEC 4-Inch Elbow Fitting facilitates directional changes in your dust collection network to maximize the system efficiency and effectiveness. This handy fitting has a multitude of applications; for example, when running a hose to an overhead mainline, altering the plane (up, down, left or right) of your hose, or as an adjunct fitting-coupled with the 4-Inch Y-Dust Hose Connector: to enable the expansion of your dust hose network. With its airtight friction grip, this durable connector will ensure that potent dust and debris is extracted sucked straight into your dust collector, and that clear, clean air is returned into your workshop environment. Make it perfect with POWERTEC fittings: streamlined, simple to use, versatile! Both 4-inch nominal ends measure 3-57/64-Inch O.D. and 3-21/32-Inch I.D.7. 9.5" x 4.5" x 3.5" Deep ABS Plastic Dust Hood with 4" OD Opening for Dust Collector Systems 73478
Feature
These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced.Made from 1/8" thick ABS abrasion resistant plastic
Overall size is 9.5" x 4.5" x 3.5" deep
Opening is 3.930" and tapers to 4.00" OD and will accept 4" flexible hose via hose clamp or tapered quick connect fitting
4 each 1/4" mounting holes
Description
These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. The opening will accept a 4" flexible hose using a hose clamp or tapered a quick connect fitting. These ABS plastic dust ports are very economically priced to allow you to outfit your dust collection system for maximum performance. These fittings are made from 1/8" thick ABS abrasion resistant plastic and are designed to withstand the abrasive nature of wood chips and saw dust. Due to the potential for built up of static electricity, it is recommended that all dust collection systems with plastic fittings be properly grounded.8. POWERTEC 70171 Threaded Quick Coupler, 4 x 2-1/2"
Feature
4-Inch I.D end presses onto any 4-Inch diameter tapered dust collection port2-1/2-Inch end threads into a 2-1/2-Inch dust collection hose
No hose clamps are required
Total length: 5-Inch
Threaded 2-1/2-Inch end length: 2-3/4-Inch; 4-Inch end length: 2-1/4-Inch
Description
The POWERTEC 4-Inch by 2-1/2-Inch Threaded Quick Coupler quickly connects a machines 4 -Inch dust collection port to a 2-1/2 -Inch dust collection hose. The 4-Inch I.D end is designed to press onto a 4-Inch diameter tapered port. The opposite 2-1/2-Inch end simply threads into a 2-1/2-Inch dust collection port. No hose clamps are required. 4-Inch Nominal end measures 4-13/64-Inch tapered O.D., 3-31/32-Inch tapered I.D.9. PSI Woodworking DBGULP Big Gulp Dust Hood
Feature
Dust hood with a 13-by-16-inch openingPerfect for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods
Lightweight and portable; made from tough ABS plastic
4-inch port to connect to any dust collection system
Weighs 2.2 pounds
Description
PSI Woodworking's Big Gulp dust hood has a large 13-by-16-inch opening. It's an ideal hood for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. It's lightweight and portable and has a tough ABS plastic construction. The 4-inch port to connects to any dust collection system.10. Rousseau 5000 Dust Solution for Miter Saws, Silver
Feature
Hood Captures Dust And Directs Airflow To 4" Vacuum PortInterior Baffles Prevent Escape Of Fine Dust
Use With Shop Vass, Dust Collectors Or Installed Vacuum Systems
Hood Folds Into Heavy Duty Carry Bag For Compact Storage And Transport
Fits All Miter Saws
Use With Shop Vacs, Dust Collectors Or Installed Vacuum Systems
Recent Comments