Top 10 recommendation ceiling joist finder
Finding the best ceiling joist finder suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best ceiling joist finder
1. Stud Finder Sensor Wall Scanner - 4 in 1 Multi Function Electronic Stud Sensor Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Detection
Feature
ADVANCED SENSORS TECHNOLOGY FOR ACCURATELY AND QUICKLY LOCATES STUDS WOOD METAL AC WIRES!- A good stud finder detector needs to be Accurate. Tavool wall scanner is an electronic stud finder with multi-sense technology which can locate studs/wood/AC wires in multiple locations on your wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this digital stud scanner. PLEASE NOTE:NABINII STUD FINDER IS TAVOOL STUD FINDER4 IN 1 MULTIFUNCTION PLUS DEEP DETECTION - The digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
EASY TO READ LCD SCREEN Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
AUTOMATIC CALIBRATION AND SIMPLE USE - Turning on the stud finder and Completing calibration by placing the wood beam finder on the wall when the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash and beep once it has picked up the edge of a stud
ERGONOMIC GRIP FOR COMFORTABLE USE - The ergonomic design of this wall stud finder makes it comfortable to hold from any angle. This stud joist finder wall detector can quickly LOCATE the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing TVs, cabinets, garage shelves etc
Description
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side .Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster.
Tavool stud beam finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something.
Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE!
How to use an electronic stud finder detector?
Step 1: Install the 9v battery (not included in the package) & choose the mode.
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared.
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen.
2. Stud Finder Sensor Wall Scanner - 4 in 1 Multi Function Electronic Stud Sensor Finders Wall Detector Center Finding with Battery and LCD Display for Wood AC Wire Metal Studs Detection
Feature
ADVANCED SENSORS TECHNOLOGY FOR ACCURATELY AND QUICKLY LOCATES STUDS WOOD METAL AC WIRES!- A good stud finder detector needs to be Accurate. Tavool wall scanner is an electronic stud finder with multi-sense technology which can locate studs/wood/AC wires in multiple locations on your wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this digital stud scanner4 IN 1 MULTIFUNCTION PLUS DEEP DETECTION - The digital wall scanner includes four different scanning modes for woods, metals, AC wires and deeply embedded objects. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
EASY TO READ LCD SCREEN Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
AUTOMATIC CALIBRATION AND SIMPLE USE - Turning on the stud finder and Completing calibration by placing the stud finder on the wall when the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The finder will flash and beep once it has picked up the edge of a stud
ERGONOMIC GRIP FOR COMFORTABLE USE - The ergonomic design of this wall stud finder makes it comfortable to hold from any angle. This stud finder wall detector can quickly LOCATE the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing TVs, cabinets, garage shelves etc
Description
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side . Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster.
Tavool stud finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
The stud finder wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something.
Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE!
How to use an electronic stud finder detector?
Step 1: Power on the device and choose the scanning mode.
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared.
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen (if available).
3. Stud Finder Wall Scanner - 3 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection
Feature
FOUR SCANNING MODES - The stud finder provides four scanning modes in total for detection. Depending on the tasks you have, you can switch to the desired mode. The STUD SCAN is used for finding and locating the center and edges of wood or metal studs up to 3/4 in (19mm) deep; DEEP MODE for scanning walls for 1 1/(2 ) in (38mm) deep; METAL SCAN for locating and detecting metal (such as 1/2 inch rebar) up to 2 1/(4 )in (60mm) deep; and AC SCAN for locating live AC wires up to 2 in (51mm) deepGRAPHICAL LCD DISPLAY - The multi Function wall scanner detector has a GRAPHICAL LCD DISPLAY, which indicates many cues in detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. And the Low Battery Indicator icon displays when the battery level is getting low, reminding you to replace a brand new 9-volt battery in time
SOUND WARNING - The multi function stud finder offers the BEEP SIGNAL ALERT. When you have detected an object with the wall scanner, it will beep continually. The big sound warning together with the LCD screen helps detect the accurate location of the objects. Then a peck shape will display on the graphical screen. You can use the pencil to point the location of the object. The audible and visible cues reliably keep users informed when any object, such as metal, studs, AC live wiring gets found
AUTOMATIC CALIBRATION - The wall dectector stud finder would AUTOMATICALLY CALIBRATE ITSELF when it is turned on. The calibration is done by positioning the device on the wall where there is no wood studs, AC wires or metal. The stud finder will indicate whether it has been already calibrated or not. The automatic calibration is accurate and precise, providing users with maximum reliability, greatly reducing errors in application and makes sure that most objects behind the wall can be detected
SIMPLE AND FAST - The stud finder wall scanner can QUICKLY LOCATE the edges and center of metal studs, pipes, rebar, joists behind walls, floors and ceilings as well as the live AC wires. Fast detection saves users time and efforts, making the task completion EASIER. One button on the middle of body is used for selecting from four scanning modes. The other button is on the left side of device, which helps you easily read the information on LCD screen and quickly detect the objects behind walls
Description
The multi-scanner stud finder is an extremely ideal tool for construction, electricians, masons, carpenters, homeowners, and others who need reliable detection.The stud finder wall scanner has four scanning modes in total : Stud Scan, Deep Mode, Metal Scan and AC Scan, which offers you wide choices to select your desired mode when it comes to various tasks. Due to the multi-mode detection and portability, the users can apply the stud finder wall detector to wide use. You can work on different wall surfaces, such as lath, wallpaper, wood flooring, acoustic ceiling, painted walls and more.
The greatest advantage of VIVREAL multi-scanner stud finder lies in its fast and simple detection. After selecting your desired mode, simply press the button on the left side of stud finder wall detector, you can quickly and accurately identify the wood and metal studs, copper and steel pipe, rebar, or wiring hidden behind the walls. It really saves you quantities of time and makes your detection experience more interesting and productive.
In addition, VIVREAL wall scanner detector also gives you many audible and visible cues when any objects detected, which helps you to find the exact location of variety of materials. The bright graphical LED display shows the Read-Outs of detection mode, signal strength, automatic calibration, battery indication with maximum readability. These smart features all make the stud finder wall scanner compact and durable.
USER TIPS:
1. Hold the stud finder properly and move it slowly in one direction to obtain the optimum scanning results.
2. Avoid placing your other hand, or any other part of your body on the surface being scanned, which will interfere with the performance of the scanner
3. Make sure that the surfaces you scan are flat and have been fully dried out.
4. Take care when working near the electrical wires and always turn off the power supply.
4. Zircon MultiScanner i520-FFP Center Finding Stud Finder with Metal and Live AC Wire Detection
Feature
Zircon's MS i520 is a multi-surface scanner with 4 modes that detect studs, metal and live AC wiring to help you easily find studs and avoid hazardsBoth StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar); AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, while the Patented SpotLite Pointing System clearly indicates the target location
One fully charged 9V battery, not included, is required for the multi-surface scanner to run at optimal performance
Description
The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which acts as a live wire detector and finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. The Zircon MultiScanner i520 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MS i520, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.5. Meterk Stud Sensor with Large LCD Display, Stud Finder Wood Studs Center Finder Multi Wall Detector For Metal, AC Live Wire, Wood Finder with Warning Detection
Feature
Easy to Use : Only three buttons, first press ON/OFF power button, then select the Mode Switch Button,after that just press the "Scan button"(at the left side of the device) and scan horizontally across the object surface.Smart Beep Function & Ergonomic Design: With an audible beep to remind you of the stud's location and position to find the stud center quickly. Handheld and anti-slip body for comfortable and firm grip, convenient to use.
LCD with Backlight Display: Large LCD digital display with illuminated graphical and sound signal indication, also with battery level indication.
Three Detecting Modes: During the stud sensor mode, it can locate the the edges of wood or metal studs up to 3/2" (38mm), metal rebar up to 3"(76mm) and AC wire up to 2"(51mm).
Widely Application: Multi-scanner stud finder for Wood, Metal, Deep, AC Current. Quickly locates edges and center of wood ,wall studs, metal pipes,wooden joist ,rebar behind walls, floors and ceilings, also indicates the presence of live AC wire.
Description
Want to find stud or AC wire? Try the Meterk Stud Finder! It's a handheld walldetector with high sensitivity for home decoration, which could help you locate hidden
metal pipes, live wire, stud and metal frames accurately when you want to dig a hole
to hang a picture or install shelves.
Specifications:
Brand Name: Meterk
Color: Black
Material: ABS
Maximum Detection Depth:
Metal Rebar: 3" (76mm)
AC Live Wire: 2" (51mm)
Wood and Metal Studs: 3/2" (38mm)
Operating Temperature: -20 60
Storage Temperature: -20 60
Power Supply: 1 * 9V 6F22 Battery (Included)
Item Size: Approx. 154 * 69 * 30mm / 6.06 * 2.72 * 1.18in
Item Weight: Approx. 189g / 6.67oz
Package Size: Approx. 17 * 8.5 * 4.5cm / 6.69 * 3.35 * 1.77in
Package Weight: Approx. 248g / 8.74oz
Package List:
1 * Wall Detector 1 * User Manual (br)(English + German + Spanish + French + Japanese + Italian)(br) 1 * 9V 6F22 Battery
6. Multi-Scanner Stud Finders Wall Detector Center-Finding Stud Metal AC Live Wire WoodScanner Wall Stud Finder
Feature
Multi-Scanner Stud Finder LCD Display Multi Scanning Multi Function Stud Sensor Detector with Sound Warning for AC Wire, Metal, Wall Studs, Wood.LCD Backlit Display and Audible Indication: Illuminated graphical LCD and sound signal indicate mode, detection strength and more
Multi-mode Detection: Detects metal studs up to 3/2 in(38mm), metal rebar or pipe up to 3 in(76mm) while AC live wire up to 3 in(76mm)
Functionality: Quickly locates edges and center of metal studs, pipes, rebars, joists behind walls, floors and ceilings, also indicates the presence of live AC wire
Description
Description:This Wall stud finder quickly and easily locates the edges and center of metal studs and joists behind walls, floors and ceilings. Its easy-to- read display screen indicates directions, edges and center of studs, while Wire Warning detection indicates the presence of live AC voltage
Features
Stud mode: detect metal studs with 1/2 inch, 1 inch and 3/2 inches mode
Metal mode: detect metal pipes, rebars etc up to 3 inches
AC mode: detect unshielded AC live wire up to 3 inches
Important Tips
Calibration: Place it flat on wall first. Then press and hold the Scan button, and keep the unit still until calibration is complete(1-2 seconds).
When calibration is complete, the display bars will be cleared Operation: Keep it flat against the wall and move the unit slowly. Do not rock or lift it
Detection depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc
Seller Warranty
- 12-Month Replacement Warranty
- 30-Day Money Back Guarantee
- Lifetime Support Guarantee
7. Stud Finder Wall Scanner - 4 in 1 Electronic Stud Finders Wood Beam Joist Finders Stud Sensor Wall Detector Edge Center Finding with battery LCD Display for Wood Live AC Wire Metal Studs Detection
Feature
FOUR TASK-DEPENDENT SCANNING MODES - Switch to desired mode as necessary. STUD SCAN is used for finding and locating the center and edges of wood or metal studs up to in (19mm) deep; DEEP SCAN is used for scanning deeper walls with a thickness up to 1 in (38mm); METAL SCAN for locating and detecting metal (such as inch rebar) up to approximately. 2 in (60mm) deep; and AC SCAN for locating live AC wires up to 2 in (51mm) deep.GRAPHICAL LCD DISPLAY - This display indicates many cues in detection, such as detection mode, signal strength, automatic calibration, and battery indication, all with maximum readability. The Low Battery Indicator icon displays when the battery level is getting low, reminding you to replace a brand new 9-Volt battery in time.
BEEP SIGNAL ALERT SOUND WARNING - When the wall scanner has detected an object, it will beep continually. The big sound warning together with the LCD screen helps detect the most accurate location of the objects. Then a target indication bar will be displayed on the graphical LCD display screen. You can use a pencil to then mark the location of the object on the wall. The audible and visible cues reliably keep users informed for when any object, such as any metal, studs, and AC live wiring
AUTOMATIC CALIBRATION - The wall detector stud finder will AUTOMATICALLY CALIBRATE ITSELF when it is turned on. The calibration is done by positioning the device on the wall where there are no wood studs, AC wires, or, metal. The stud finder will indicate whether it has been already calibrated or not. The automatic calibration is accurate and precise, providing users with maximum reliability, greatly reducing errors in application and makes sure that most objects behind the wall can be detected.
SIMPLE AND FAST - The stud finder wall scanner can QUICKLY LOCATE the edges and center of metal studs, pipes, rebar, joists behind walls, floors and ceilings as well as live AC wires. Fast detection saves users time and effort, making the task completion EASIER.
Description
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side . Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster.
Tavool stud finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
The stud finder wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something.
Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE!
How to use an electronic stud finder detector?
Step 1: Power on the device and choose the scanning mode.
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared.
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen (if available).
8. Stud Finder Multi-Function High Precision Wood Metal and AC Electrical Wire wall Scanning Detector with LCD Display (by Sharkk)
Feature
3-in-1 SCANNING FUNCTIONALITY: The Multi-Scan Stud Finder uses electronic signals to locate studs, ceiling joints, hot AC wiring and other metal parts with exact precision and ease.SMART FEATURES: The stud detector comes with an easy-to-read LCD screen displaying the desired stud material as well as the precise position of the stud, which when found causes the device to emit a beeping sound and notify the user.
MATERIAL DETECTION: The Multi-Scan Stud Finder can be used for many purposes, including simpler and more advanced projects, like finding studs, various metals, and hot AC wiring through your ceilings and walls.
EASY CALIBRATION AND PRACTICAL DESIGN: The Stud Finder is built for easy use, and includes all instructions on calibrating the device (and checking for correctness). Once finished, the device emits beeping sounds to notify the user that it is ready to scan. With a lightweight and ergonomic design, the Stud Finder weighs only 203g (including the 9V battery) and is comfortable when held.
LIFETIME WARRANTY: At Sharkk our high standard of quality is what keeps millions of valued customers like you happy. Your Massage Cane is covered under a manufacturer's warranty spanning the lifetime of your product, so let us know if you find an issue - and we will repair or replace it at no charge, hassle-free.
Description
Plaster, drywall, concrete and other building materials are no match for the upgraded Sharkk 3-in-1 Multi-Scan Stud Finder.
This lightweight scanner emits a beeping sound and visual signals on a bright LCD Display screen to let a user know when they're struck metal.
Its simple and ergonomic structure makes the Stud Finder ideal for anyone - from an experienced electrician, to those simply working on a DIY-project.
Surprisingly powerful for its size and price, the Stud Finder's deep sensing technology makes it one of the best Stud Finders available.
3-In-1 Scanning Functionality
The Stud Finder not only locates wood behind drywall, but can also locate metal and hot or "live" AC wiring.
Smart Beep Function
A beeping sound lets you know when the scanner has detected a stud and also assists you with the initial device calibration.
Ergonomic Design
The contour of the Sharkk 3-in-1 Stud Finder is ergonomically designed to comfortably fit in one's hand while in use.
FOR YOUR SAFETY: The Multi-Scan Stud Finder detects studs, metal, and hot unshielded AC wiring behind walls floors and ceilings. It can also detect reinforced steel in concrete.
For your protection, the Stud Finder has a warning feature that indicates when it has detected a hot or "live" AC wire.
Sharkk is a consumer electronics brand by the people, for the people. The insights we get from our growing community of savvy shoppers are at the core of our well-designed, high-performing products, tailored to your modern lifestyle.
By focusing on the consumer, we make it our mission to maintain the highest standards of a premium-product experience - without the premium price tag.
9. Stud Finder, 3 in 1 Multi-Function Wall Stud Sensor Detector with LCD Display and Sound Warning for AC Live Wire, Wood, Metal, Deep Scanning Kuled M79
Feature
Stud sensor Scanner depth: Detects stud up to 0.71 inches (18mm) , metal up to 3 inches (76mm) , deep scanning up to 1.25 inches (32mm), presence of live wire up to 3 inches (76mm) .3 in 1 : Multi-scanner stud finder for Wood, Metal, Deep, AC Current. Quickly locates edges and center of wood ,wall studs, metal pipes,wooden joist ,rebar behind walls, floors and ceilings, also indicates the presence of live AC wire .
Easy to Read : LCD with digital display and continuous sound warning indicating you the location of the edges of the studs.
Easy to Use : Only three buttons, first press ON/OFF button, then select the probe type ,after that just press and hold the "Scan button"(at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds .
Compact design is easy to hold and use. Low battery indication. Battery :1x9V batteryincluded.
Description
KULED Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings etc.This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the edge of the stud.
Features:
- STUD mode: detect metal and wood studs up to 0.71 inches (18mm) .
- METAL mode: detect metal pipes ,rebars etc up to 3 inches (76mm) .
- DEEP mode: detects wooden beams ,metal rebars up to 1.25 inches (32mm) .
- AC mode: detects AC live wire up to 3 inches (76mm) . Select AC scan mode to determine
position of hot wires. Begin by placing the scanner at some position away from hot wiring.
- Auto power off after about 1 minutes of non-use.
- Low battery indicator
- Auto calibration all functions detection
- Battery :1x9V batteryinclude
How to use
1: Press ON/OFF button to power on the device, and press RIGHT button to choose the scanning
mode you want to detect. Listen "beep"to confirm the mode button effective.
2: Place the device flat on wall first. Then press and hold the button at the left side of the device ,
and keep the unit still until the unit sound a short beep twice and the display bars will be
cleared .
3: While still holding on the button ,move the stud finder on the desired surface to scan and
detect for studs, metal beams, rebars, pipes ,AC wire etc .you can scan the object from left to
right.
4 : When the device detected an object , it will beep continually and a peck shape will also display
on the LCD screen .
Battery installation
1.Open battery door on back of case.
2.Connect a 9-volt battery to battery clip.
3.Insert battery into case and replace battery door.
Package Contents
1 x Stud Finder
1 x 9V battery (included)
1 x User Manual
10. Stud finder, Stud Center Finding Sensor, Multi Scanner Wood, Metal and AC Live Wire Detector with LCD Display, Deep Scanning (Stud finder)
Feature
Stud sensor scanner depth: detects stud up to 0.75 inches (19mm), metal up to 2.36 inches (60mm), deep Scanning up to 1.5 inches (38mm), presence of live wire up to 2 inches (51mm)3 in 1: multi-scanner stud finder for wood, metal, deep, AC current. Quickly locates edges and center of wood, wall studs, metal pipes, wooden joist, rebar behind walls, floors and ceilings, also indicates the presence of live AC wire
Easy to read: LCD with digital display and continuous sound warning indicating you the location of the edges of the studs
Easy to use: only three buttons, first press on/off button, then select the probe Type, after that just press and hold the "scan button"(at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds
Compact design is easy to hold and use. Low battery indication. Battery: 1x9V batteryincludedsuring tools, layout tools, stud finder wallscanner, wallmount
Description
MICMI Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the center of wood and metal studs and joists behind walls, floors, and ceilings etc.This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the center of stud.
Features:
- STUD mode: detect metal and wood studs up to 0.75 inches (19mm) .
- METAL mode: detect metal pipes ,rebars etc up to 2.3 inches (60mm) .
- DEEP mode: detects wooden beams ,metal rebars up to 1.5 inches (38mm) .
- AC mode: detects AC live wire up to 2 inches (51mm) . Select AC scan mode to determine
position of hot wires. Begin by placing the scanner at some position away from hot wiring.
- Auto power off after about 1 minutes of non-use.
- Low battery indicator
- Auto calibration all functions detection
- Battery :1x9V batteryinclude
How to use
1: Press ON/OFF button to power on the device, and press RIGHT button to choose the scanning
mode you want to detect. Listen "beep"to confirm the mode button effective.
2: Place the device flat on wall first. Then press and hold the button at the left side of the device ,
and keep the unit still until the unit sound a short beep twice and the display bars will be
cleared .
3: While still holding on the button ,move the stud finder on the desired surface to scan and
detect for studs, metal beams, rebars, pipes ,AC wire etc .you can scan the object from left to
right.
4 : When the device detected an object , it will beep continually and a peck shape will also display
on the LCD screen .
Battery installation
1.Open battery door on back of case.
2.Connect a 9-volt battery to battery clip.
3.Insert battery into case and replace battery door.
Package Contents
1 x Stud Finder
1 x 9V battery (included)
1 x User Manual
Recent Comments