Top 10 plaster hole saw 6
If you looking for plaster hole saw 6 then you are right place. We are searching for the best plaster hole saw 6 on the market and analyze these products to provide you the best choice.
Best plaster hole saw 6
1. Milwaukee 48-22-0304 6 Inch Drywall and Plaster Rasping Jab Saw w/ Rubber Handle
Feature
APPLICATION: Use this to saw through drywall and plaster for demolition or renovation jobsRUBBER HANDLE: The rubber overgrip helps you maintain complete control over your cuts in slippery conditions
FLAT POMMEL: You can tap on the flat end of the knife with a hammer or your palm to help it dig into your walls with greater ease.
RASPING HOLES: These holes built into the sides of the knife make it easier for you to expand the holes of your drywall faster than a standard jab saw.
DUAL TEETH BLADE: The unique blade texture is optimized for fast sawing through thin materials.
Description
There are few blades more useful than the Milwaukee 48-22-0304 for slicing through drywall for renovation projects. Everything about this knife adds utility to your workday, from the handle to the tip of the blade. Being a jab saw, it's no surprise that you will be able to dig into your work surface with ease. What's unique about this particular knife, however, are the rasping holes on the side. They let you expand the holes you're digging. You can also use them for masonry jobs, smoothing out harder surfaces like rock and metal. Going down to the handle, there are a couple features loaded into it that give you improved control. The rubber molding lets you keep a grip in slippery conditions while the flattened pommel lets you drive it deep into your work surfaces through light impacts with your hand or hammer. Whether you're working in a residential or industrial job site, you will find this jab saw from Milwaukee a necessary addition to your tool collection.2. Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8 dia for 6 inch lights: fast cutting in drywall, lath & plaster, Hardi board: easy plug removal uses standard 5/8 18 thread hole saw arbor adptr
Feature
1" deep - Hard tungsten carbide grit edge for a long life in abrasive materialsContinuous cutting edge for smooth cutting even in wood lath and plaster
Cuts through drywall, plaster, CornHole board, fiber cement Hardie board, stucco, acoustical tile, ceiling tile
Attaches to standard 5/8"-18 2-pin mount hole saw arbor and works with Hole Pro X-230+ adjustable hole cutter & shield kits
Open back design for faster cut plug removal
Description
***HOLE SAW ONLY -- does NOT INCLUDE Pilot Bit, Arbor or Shield or Hole Pro X-230+***** Blue Boar Tungsten Carbide Grit Recessed Lighting Hole Saw 6-3/8" is perfect for installing most 6-inch recessed light cans in ceilings and sofits. CONFIRM the actual cutout size of your recessed lights as all 6" lights can vary by manufacturer. The hole saw has a hard tungsten Carbide grit that provides longer life in tough, abrasive materials. Continuous cutting edge provides a smooth cut and does not catch on wood or metal lath and plaster. The open back design makes it fast and easy to remove the cut plug and start the next cutting the next hole. This hole saw works perfectly with recessed lights (incandescent, halogen, and LED) made by Capri, Halo, Juno, Marco, Lithonia, Progress, Lightolier, Pathway & Thomas, and others light cans requiring a 6-3/8" opening. The 1-inch cutting depth will cut through the thickest drywall, stucco, and plaster, and provides clearance so the carbide grit hole saw can also be used with Hole Pro X-230+ hole cutters for 100% dust containment of the drywall dust or when dealing with lead paint or asbestos and needing to use a HEPA vacuum. Attaches to standard hole saw arbor adapters made for 1-3/8" and larger hole saws including the Blue Boar Heavy Duty 7/16" shank dual arbor and mandrel kit HP15973. Hole Saw Blade for Cornhole Boards, Plywood, Iron board, Acrylic, Ducts, Ceiling lights, Cinder wall, High Speed Steel 6 inch 152mm
Feature
Material: M42 High Speed Steel, mandrel diameter: 10.95mm/0.43inch, rotate clockwiseCutting holes for plywood, iron board, acrylic, ducts, ceiling lights, cinder wall, cornhole board,etc.
high abrasive resistance, extremely durable and provide fast, clean cuts in the toughest materials
working great and much easier than using a jigsaw
For Ducting, please MEASURE the Ductwork and Fittings FIRST.
Description
NINAT presents you this saw, designed for deep-cutting applications, working greatly and more easily than using a jigsaw.Material: M42 High Speed Steel
Usage: cutting holes for plywood, iron board, acrylic, ducts, ceiling lights, cinder wall, cornhole board, can light etc.
Saw tooth: made of hardened high-speed steel, high abrasive resistance, extremely durable and provide fast, clean cuts in the toughest materials, excellent in deep-cutting applications.
Mandrel diameter: 10.95mm/0.43inch
Recommend:
For Ducting, please MEASURE the Ductwork and Fittings FIRST.
It's a very useful tool gift for your husband and friends.
Multi Dimensions: (some dimensions temporarily out of stock)
1.5 inch 38mm, one Mandrel
1.6 inch 41mm, one Mandrel
1.7 inch 44mm, one Mandrel
1.8 inch 46mm, one Mandrel
1.89 inch 48mm, one Mandrel
2 inch 51mm, one Mandrel
2.08 inch 53mm, one Mandrel
2.12 inch 54mm, one Mandrel
2.24 inch 57mm, one Mandrel
2.4 inch 61mm, one Mandrel
2.48 inch 63mm, one Mandrel
2.52 inch 64mm, one Mandrel
2.64 inch 67mm, one Mandrel
2.8 inch 71mm, one Mandrel
2.99 inch 76mm, one Mandrel
3.19 inch 81mm, one Mandrel
3.27 inch 83mm, one Mandrel
3.39 inch 86mm, one Mandrel
3.5 inch 89mm, one Mandrel
3.62 inch 92mm, one Mandrel
4.49 inch 114 mm, one Mandrel
4.72 inch 120 mm, one Mandrel
6 inch 150mm or 152mm, one Mandrel
6 Pack : 1.5 inch, 1.6 inch,1.9 inch, 2 inch, 2.1 inch, 2.4 inch, 6 hole saws, one mandrel
4. GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards
Feature
CONSTRUCTION GRADE: Heat treated carbon steel alloy 6" hole saw blade, non-binding clean edge designPROFESSIONAL CUTTING: Hole saw cuts smooth and even 6" diameter holes through wood, drywall, plaster and thin metal; 7/8" saw blade depth
PROJECT TOOL: Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more
DIY READY: Includes everything you need to do-it-yourself, mandrel and drill bit work with any 1/2" drills
GOSPORTS WARRANTY: GoSports is a US company with US customer support - 100% satisfaction guaranteed
Description
The GoSports 6" hole saw is a premium construction grade tool that cuts perfect 6" diameter holes, no matter what your project. We were frustrated by the other cheap hole saw products that broke after only one use, so we designed our own that is built to last. The bits are perfect for a wide variety of projects, including corn hole boards, air ducts, ceiling lights, speakers and more. The bit universally attaches to any 1/2" drill and has a blade depth of 7/8" inch. The saw can cut through wood, drywall, plaster and soft metals. Adult use only and always wear appropriate safety gear when using.5. EZ HOLE Professional Hole Saw Cutter with Full
Feature
FULL LIFETIME WARRANTY - The last hole cutter you'll ever need to buy.CUTS HOLES WITH EASE - Ideal for plywood, drywall, plaster, backer board, etc.
HEAVY DUTY - Carbide cutting blade, all metal jig, sealed ball bearings, and an ABS dust shield
COSTS LESS - This kit can replace an entire hole saw set from 1-3/16" to 8-5/8" for much less
REPLACEABLE BLADE - Inexpensive tungsten carbide replacement blades readily available
Description
This Hole Saw Kit Makes it EasyJust set the cutter to the correct size and attach it to a drill. It will cut a clean hole while trapping all of the dust and debris inside its plastic shield.
A Complete Kit
Each kit includes an all steel hole cutter, specially designed dust shield with full ball bearings, extra blade for various surfaces, adjustment wrenches, and a durable storage case. The saw is fully adjustable from 1-3/16" to 8-5/8" and cuts up to 7/8" deep on one side or 1-3/4" deep from both sides.
Eliminate the Dust and Mess
Drywall and plaster dust can be a nightmare to control, especially when working inside a furnished home. Dust and debris is captured inside the hole cutter's transparent cowl rather than going airborne and making mess.
Replaceable Blade
Inexpensive replacement blades are readily available and can be changed in seconds.
Full Lifetime Warranty
Only the cutter blade and pilot bit are not included in lifetime warranty but are fully replaceable after normal wear.
6. Eliseo 6 inch 150 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game/Carbon Steel & BI-Metal Heavy Duty Steel(Black)
Feature
Heat treated carbon steel alloy 6" hole saw blade, non-binding clean edge design.Hole saw cuts smooth and even 6" diameter holes through wood, drywall, plaster and thin metal.
Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more
Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" or 1/2" drills
1 pack 6-inch hole saw, 1 pack hex shank drill bit adapter.
Description
Eliseo 6 inches Hole Saw for Corn Hole DrillingMaterial:
Carbon Steel, Durable and no Rust
Package:
1 pack 6-inch hole saw
1 pack hex shank drill bit adapter
It is OK for drilling as both clockwise rotation and anti-clockwise.
7. Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards / Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game / Carbon Steel & BI-Metal Heavy Duty Steel( Black )
Feature
EFFICIENT SMOOTH CUTTING:Non-binding clean edge design make Eliseo hole saw blade cuts smooth and fast.HIGH PERFORMANCE METIERAL:Bi-metal heavy duty steel alloy Eliseo 6" hole saw was builted tough for repeat use , durable and anti abrasive.
WIDE APPLICATION:Hole saw cuts 6" diameter holes through wood, drywall, plaster and acrylic-board. In addition to building your own cornhole boards, the ELiseo Hole Saw comes in handy for home projects when working on air ducts, ceiling lights, speakers, and more, mandrel and drill bit work with any 3/8" or 1/2" drills.
DIMENSIONS: Cutting Diameter: 6"/152mm ; Hole Saw Depth: 1"/25mm.
PACKAGE: 1 pack 6-inch hole saw, 1 pack hex shank drill bit adapter.
Description
Eliseo 6 inches Hole Saw for Corn Hole DrillingMaterial:
Bi metal, Durable and no Rust
Package:
1 pack 6-inch hole saw
1 pack hex shank drill bit adapter
It is OK for drilling as clockwise rotation, but not anti-clockwise.
8. Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board
Feature
Multi-functional hole cutter for cutting 1 7/8" to 6" holes in ceilings, walls and floors.Depth of cut: 3/16" (5mm) - 1 " (25mm) cut from one side, 2" (50mm) cut from 2 sides.
Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
Dust Shield has 8" OD- Use with any 3/8" drill, Twin blades - User replaceable.
Comes with one High Speed Steel blade set and one Tungsten Carbide blade set.
Description
One kit takes the place of dozens of hole saws while enabling fast dust free cutting exact size holes from 1-7/8" up to 6"; inches in diameter. Kit includes high quality adjustable hole cutter, ball bearing mounted ABS shield with soft rubber gasket to trap dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter perpendicular to work surface and cutter has adjustment knob to limit the depth of cut when making holes in walls or ceilings to avoid accidentally cutting wires or pipes. Kit includes user replaceable High Speed Steel blades for cutting wood, MDF, Lexan and other plastics, acoustic tile, tongue and groove, laminates, and Tungsten Carbide blades for cutting sheetrock, plaster, cement or Hardi board, fiberglass, OSB, chipboard, plywood, and similar materials. Twin blades for faster cutting and perfect balance eliminate the need for balance bars which can break off inside other cutters. Requires the torque of common hole saws so a smaller drill can be used and cordless drills can cut more holes before needed to be recharged. " cord drills that are rated for maximum hole saw size of 3-1/2 inches for wood can cut holes up to 6" in diameter in plywood using the Hole Pro hole cutter. Like all Hole Pro Power Series kits the safety dust shield (8" OD) can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as the adjustable hole cutters. **** NOT MADE FOR USE WITHOUT PILOT BIT****9. Eliseo 6 inch 152mm Hole Saw for Cornhole Boards - Heavy Duty Bi Metal Corn Hole Drilling Cutter with HSS Drill Bit and Hex Shank Arbor - Cut Smooth and Fast in Wood, Plastic, Soft Drywall, Soft Metal
Feature
HIGH PERFORMANCE METIERALEliseo Bi-metal 6" hole saw is made up of M42 High Speed Steel teeth and carbon steel band, with higher hardness(64HRC), higher toughness and stronger wear resistance ,for longer lifeEFFICIENT SMOOTH CUTTINGThe best cutting performance of HSS teeth combines with variable tooth pitch and non-binding clean edge design ensure Eliseo hole saw blade cuts smooth,clean and fast.
WIDE APPLICATIONHole saw cuts 6" diameter holes through wood, drywall, plaster and acrylic-board. In addition to building your own cornhole boards, comes in handy for home projects when working on air ducts, ceiling lights, speakers, and more
COME WITH ARBORIncludes everything you need to do-it-yourself, mandrel and HSS drill bit work with most 3/8" and 1/2" drills
100% SATISFACTION GUARANTEEWith our 100% satisfaction customer support and 30 day 100% Money Back Guarantee, buy with confidence! Click on the "Add To Cart"" Button NOW!"
Description
Eliseo 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole BoardsMost Popular Use
- Cornhole boards
- Air ducts
- Ceiling lights
- Recessed lights
- Speakers
- Cutting 6"" holes through wood, plywood, plastic, soft drywall, thin metal etc.
Specification
- Materials: Bi-Metal & HSS
- Diameter: 6 inch (152 mm)
- Cup depth: 1-1/8 inch (30 mm)
- Backing plate thickness: 1/4 inch (6 mm)
- Hex shank Dia: 3/8 inch (fit most 3/8"" drills & up)
- Center drill bit Dia: 1/4 inch
- Color: Orange
- Weight: about 2.1 lb (960 g)
Package Included
- 1 x 6 in hole saw
- 1 x 3/8 in mandrel
Noted
It is OK for drilling as clockwise rotation, but not anti-clockwise. "
10. 6 inch Hole Saw for Making Cornhole Boards 152mm Corn Hole Drilling Cutter BI-Metal Heavy Duty Steel Blade & Hex Shank Drill Bit Adapter By STARVAST for Cornhole Game, Home Improvement (Red)
Feature
Material Corn Hole Drilling Cutter is made of tough HSS carbon steel & Bi-metal steel. It is superior performance and cutting strengthCutting Design 6 inch Hole Saw Kit with 3/8-Inch Hex Shank Quick Change Arbor, perfect for any power drill to cut round holes in cornhole boards, drywall, wood, plastic, soft plaster, acrylic-board and thin metal
Structure With the non-binding clean edge design, this hole saw cuts smooth and easy. And the spring on the drill bit would automatically pushes the disc out of the saw immediately after completing the hole
Cutting a Hole You must perpendicular to the board and drill as clockwise rotation to make a 6 inch (152mm) corn hole. It's cutting depth of 30 mm
Package Come with a 6-inch (152mm) hole saw, a 3/8-Inch hex shank quick change arbor, 2 Pcs high-speed steel pilot drill and an small Allen wrench
Description
Corn Hole Drilling Cutter will provide smooth, even professional cutting.Hole Saw Blade is a premium construction grade tool that cuts perfect 6 inch (152mm) diameter holes.
Best for Cornhole Boards and Mounting of Lights & Speakers in Drywall, Wood, Plastic, & Soft Metal.
Specification:
Material: High speed steel / Bi-Metal
Design: Non-binding clean edge design
Surface treatment: Silicon carbide coating
Cutting depth: 30mm
Color: Red
Shank: 6 hex shank
Package Included:
1 x 6-inch (152mm) hole saw
1 x 3/8-Inch hex shank quick change arbor
2 x high-speed steel pilot drills
1 x small Allen wrench
Recent Comments