Top 10 pelican tool case organizer
If you looking for pelican tool case organizer then you are right place. We are searching for the best pelican tool case organizer on the market and analyze these products to provide you the best choice.
Best pelican tool case organizer
1. Lid Organizer to Fit The Pelican 1615 Air Case.
Feature
Brand new lid organizer to fit the Pelican 1615 case.Comes with double sided Velcro. This DOES NOT screw into lid.
Approx. dims of 1615 lid org. - 29.50" x 15.50"
Picture may very from actual lid organizer.
Description
This lid organizer can only be installed with Velcro. NO SCREWS. The Lid Organizer attaches to the interior lid of the case with velcro type tapes. The Lid Organizer has four mesh pockets for easy viewing with heavy-duty nylon zippers to provide storage of cables, power supplies, tools etc.2. Pelican 1460 Tool Chest Case (Yellow)
Feature
Top lid opens up to 180 for on-the-field anti-roll stability when openEasy open Double Throw latches
Open cell core with solid wall design - strong, light weight
O-ring seal
Automatic Pressure Equalization Valve
Description
Pelican Medium Case Series. Pelican 1460 Mobile Tool Chest. You buy the best tools for the job, why not provide them the best available protection? Made in USA and built to military specs, the 1460 Mobile Tool Chest is dustproof and water resistant (IP66), so the next time your tool chest is on a truck bed during a rainstorm, your tools will arrive ready, even if you'd rater have stayed home. Outfitted with two customizable trays it will adapt to all your needs, whether they are for electrical, mechanical or general repair work. Adjustable and removable tray dividers for easy customization Top lid opens up to 180 Degree for on-the-field anti-roll stability when open O-ring seal for dust and water resistant seal (IP66) Easy open Double Throw latches Open cell core with solid wall design - strong, light weight Automatic Pressure Equalization Valve Comfortable rubber over-molded handles Stainless steel hardware and padlock protectors Personalized nameplate service available Lifetime Guarantee of Excellence (Tray system not covered by lifetime warranty) Tray sizes: Top tray 17.65?? x 8.2" x 2.4" and bottom tray 17.3?? x 8.0" x 2.3?? Also available without tray dividers Interior (L x W x D) 18.54" x 9.92" x 10.92" (47.1 x 25.2 x 27.7 cm) Exterior (L x W x D) 20.85" x 12.73" x 12.75" (52.9 x 32.3 x 32.4 cm) Body: Polypropylene Foam: Polyurethane 6 pieces Latch: EXL Purge Body: ABS Lid O-Ring: Polymer Purge Vent: 3 Micron Hydrophobic Nonwoven PET Pins: Stainless steel Purge O-Ring: 70 shore Nitrile3. Pelican 1609 - Lid Organizer for 1600 Case - Ballistic Nylon
Feature
Pelican Products1600-509-000
Case Accessories for 1600 case
Description
Ballistic Nylon with nylon zippers lid organizer . Individual mesh pockets to protect and keep your gear organized. Folder pocket . Large skip pocket for a cell phone, markers, etc . 4 slip-in pen pockets . Exterior: 16" W x 21" H x 1" D4. Pelican 1170 Case With Foam (Yellow)
Feature
Hand-held electronics protection solutionWatertight, crushproof, and dust proof
Easy open Double Throw latches
Open cell core with solid wall design - strong, light
Automatic Pressure Equalization Valve
Description
Hand-held electronics protection solution. Watertight, crushproof, and dust proof. Easy open Double Throw latches. Open cell core with solid wall design - strong, light . O-ring seal. Automatic Pressure Equalization Valve. Lifetime Guarantee of Excellence. Interior Dimensions: 10 1/2" x 6" x 3"5. Pelican 0450 Mobile Tool Chest with Wheels, without Drawers, Two Way Handles, Black
Feature
Heavy duty buttress hingesAuto Pressure Equalization Valves
Two way handles
Stable, wide track mobility
Hybrid double throw butterfly latches
Description
The Pelican 0450 Mobile Tool Chest survives rough handling and transport in extreme environments. It can hold over 150 lbs of tools and re-configurable drawers keep tools secure, even after the case has been turned upside down while closed. The 0450 flips up on its wheels to orient the front of the case upward for transporting. The wide track design stabilizes the case while using the extending pull handle. Footpads in the bottom of the case and mirror depressions in the lid allow multiple cases to be stacked. This facilitates fast, secure loading and tie-down. Standard case attributes include automatic pressure equalization valve (to balance the air pressure inside the case with the pressure outside the case), o-ring seal (to keep dust and moisture out), full-grip rubberized handles (for one or two person loading) and stainless steel padlock protectors.6. TrekPak Divider System to fit the Pelican 1510 case & Pelican 1519 Lid organizer
Feature
TrekPak Divider System with lid foam, to ONLY fit the Pelican 1510.Includes TrekPak Div. system, lid / bottom foam, & 1519 Lid Organizer. - NO CASE
TrekPak customizable inserts. Comes with cutting tool and holding pins
Approx dimensions of 1510 TrekPak - 19.75" x 11.00" x 7.60"
Case not Included - No case.
Description
Contents of the TrekPak 1510 insert are: Two perimeter pieces Two (2) dividers 18" in length Two (2) dividers 15" in length Cutter Tool 20 pins with 20 red pull tabs Top and bottom foam7. Pelican Case Protector Foam Filled 9.25" x7.12"x 4.12" ID
8. Grey & Blue Pelican 1560 case with TrekPak Divider System & 1569 Lid organizer.
Feature
Grey & Blue Pelican 1560TP With TrekPak Divider SystemIncludes Pelican 1560 TrekPak divider set and 1569 lid organizer.
TrekPak customizable inserts.
Inside dimensions of 1560 case - 19.92" x 14.98" x 9.00" (approx)
Case comes with wheels
Description
Pelican 1560 Case with TrekPak Kit Included. Pelican 1560 Case with TrekPak Kit Included Get the best protection possible inside your Pelican 1560 case with the TrekPak custom insert. Protect and organize your gear with TrekPak's innovative sturdy divider and pin system. The TrekPak insert allows you to optimize space while maximizing protection. In this kit, you will receive uncut divider strips that you will be able to cut (utilizing TrekPak's cutter tool) into smaller dividers to fit the gear you plan to place in the case. Contents of the TrekPak 1560 insert are: Two custom fit perimeter pieces for the Pelican 1560 Case Two 12 inch dividers Two 23 inch dividers 30 pins with 30 pull tabs Cutter Tool Top and bottom foam9. Pelican 1720 Rifle Case With Foam (Desert Tan)
Feature
Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.
Stainless steel reinforced padlock protectors
Interior Dimensions (inches): 42.00 x 13.50 x 5.25
Description
Pelican Protector Cases are made with Copolymer Polypropylene, using an open cell core and solid wall construction, which is stronger and lighter that the completion. You can tell its a Pelican case by the distinctive "twin-ribbed" top surface. Stainless steel pins are used for hinges and handles. The new Double-Throw latches are much easier to open.10. Tool Case
Recent Comments