Top 10 hood clamp holder for 2024
If you looking for hood clamp holder then you are right place. We are searching for the best hood clamp holder on the market and analyze these products to provide you the best choice.
Best hood clamp holder
1. Samlight Led Light Bar Mounting Brackets, 2PCS Stainless Steel Universal Pillar Hood led Work Light bar Mount Brackets Clamp Holder for Jeep Truck SUV Truck Sedan Hatchback Wagon Without Drilling
Feature
No-Drilling and Stable Design: The brackets are installed without drilling,5pcs Screws whose Dia is 0.1inch are enough to tight the light with the car cover tightlyAnti-Slip Design: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint
304 Stainless Steel: The mount brackets are made of 304 stainless steel and the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion. Their high quality guarantees that they can be used in bad weather conditions including rainy days and storms
Wide Application: This damage-free mounting bracket can be used for all car hoods,(not for ATV and UTV),Can mount any off-road lights, LED work lights, LED light bar, etc
Package & Warranty: 2 x stainless steel brackets,3 x Allen wrench (Not including lights)
Description
Description:Samlight 2pcs Universal Hood Mount Bracket are made to install the Samlight LED light bar and other brand LED light bar in your car's front hood
Features:
>>Easy to Install; No need to drill into your vehicle's bodywork to install the off road light bar
>>Compatible with almost all light bars;
>>304 Stainless Steel can protect the mount bracket from rust, corrosion;
>>5pcs Screws design can enhance the stable and durable for a long time;
Why Choose Samlight Light Accessories?
- High quality product and service
- 1 Year Warranty for Genuine Samlight Accessories
2. Hood Prop Support Clamp Compatible with Nissan Altima 2002-2006 Rod Retainer Clip Black New
Feature
One (1) Premium Hood Prop Retainer ClipApproximately 4-7/16" long; Hood Prop Rod Retainer
Perfect direct-fit Compatible withreplacement for your missing or broken hood retainer clip; 2002-2006 Nissan Altima
Premium Heavy Duty Automotive Grade Black Plastic
Reference: 65722-8J000 657228J000
Description
Hood Prop Support Clamp fits Nissan Altima 2002-2006 Compatible with Rod Retainer Clip Black New; One (1) Premium Hood Prop Retainer Clip; Approximately 4-7/16" long; Hood Prop Rod Retainer; Perfect direct-fit replacement for your missing or broken hood retainer clip; 2002-2006 Nissan Altima; Premium Heavy Duty Automotive Grade Black Plastic; Reference: 65722-8J000 657228J0003. Bobrick 6697 Stainless Steel Recessed Toilet Tissue Dispenser with Hood and Mounting Clamp, Satin Finish, 6-1/8" Width x 6-1/8" Height
Feature
Type 304 stainless steel with one-piece seamless constructionChrome-plated plastic spindle equipped with heavy-duty internal spring
Spindle holds rolls up to 5-1/8" diameter
Mounting clamps for securing to stud walls or countertop aprons
Measures 6-1/8" width by 6-1/8" height
Description
Recessed stainless steel toilet paper dispenser, constructed of type-304, 22-gauge (0.8mm) stainless steel with satin finish. Shell and flange are drawn and beveled, one-piece, seamless construction with two countersunk mounting holes. Unit furnished with 18-gauge (1.2mm) hood hinged to shell and plated steel mounting clamp for stud wall construction and countertop aprons. Support posts (2): Heavy-duty cast zamak with chrome-plated finish. Mounting bracket: Plated steel mounting clamp attaches to back of unit with two sheet-metal screws for installation in stud wall construction and countertop aprons. Chrome-plated plastic spindle equipped with a heavy-duty internal spring, hold rolls up to 5-1/8" (130mm) diameter (1500 sheets). Wall opening: 5-1/2" width by 5-1/4" height by 3-3/8" depth (140 x 135 x 85mm). Measures 6-1/8" width by 6-1/8" height.4. AES Industries 33285 Universal Gas Charged Lift Support Clamp
Feature
Holds gas charged lift supports found on hoods, tailgates, hatchbacks and trunksSecurely holds weak lift supports in the extended position to allow access
Strong steel thread surrounds a soft, brass core that prevents damage to lift support
Aluminum body prevents damage to lift support; 3/8" Opening
Adjust to fit any size shock in seconds; Eliminate accidents
Description
Avoid the danger and inconvenience of faulty or weak gas shocks on hoods, trunks and hatches of SUV's, vans, trucks and automobiles. Adjust to fit any size shock in seconds, providing a positive lock for safe access to engine compartments or luggage areas. Eliminate accidents and save time.5. Mounting Bracket Clamp Piller Holder, Eyourlife 2PCS Universal Stainless Steel Piller Hood Led Light Bar Mount Bracket Clamp Holder for SUV Truck Sedan Hatchback Wagon installing without drilling
Feature
Easy InstallationThe brackets are installed without drilling.The lamp can achieve 60 horizontal adjustment and 180 vertical adjustment. Assemblies correspond to front, rear, left, and right of the vehicle.Non-slip DesignThe brackets were designed with anti-slip teeth and rubber mats,so the led light bar can be firmly fixed without scratching the car.
DurableThe mount brackets are made of 304 stainless steel. They have excellent performance including anti-corrosion and anti-rust. Their high quality guarantees that they can be used in bad weather conditions including rainy days and storms.
Wide ApplacitionThey are compatible with most LED, HID, halogen spotlights/fog lights/driving lights or light bars,DRL etc.
Package Includes2 x stainless steel brackets (No Including Lamp), 2 x hex Allen wrench,1 x little adjustable flat wrench,3 x screw.
Description
Features:The brackets are made of 304 stainless steel. So they are anti-shock, heat-resistant and anti-corrosion. They can be used in bad weather conditions including rainy days and storms.
The brackets were designed with anti-slip teeth and rubber mats,so the led light bar can be firmly fixed without scratching the car.
The brackets work with most LED, HID, halogen spotlights/fog lights/driving lights or light bars.
The lamp can achieve 60 horizontal adjustment and 180 vertical adjustment. Assemblies correspond to front, rear, left, and right of the vehicle.
Specifications:
Material: 304 stainless steel
Weight: 212g
Package Including:
2 x stainless steel brackets (No Including Lamp)
2 x hex Allen wrench
1 x little adjustable flat wrench
3 x screw
6. OVOTOR 2PCS Stainless Steel Mounts Clamp Holder Universal LED Work Light Bar A Pillar Hood Mounting Bracket Clamp Holder for Off Road Installed without Drilling
Feature
No Need Drilling: These stainless bracket clamp holder can directly installed off road led lights without drilling holes on your lovely ride;Easy to Install: Use the Hex Allen Wrench to hold it tight on engine hood or roof racks(gap<9mm), then you can easy to intall the LED lights. And it allows to adjust the angle, 180 vertical adjustment and 60 horizontal adjustment;
Anti-slip Design: The rubber mats are design for anti-slip, makes the mounting firmly, and it can prevent the car from being scratched when installing this bracket as well;
Widely used in SUV, Jeep, ATV, Truck, Mining, Pickup, etc (can place on front, rear, left, right) for installing HID LED Off Road light;
Package: 2 PCS Mount Bracket Clamp Holder + 2 PCS Hex Allen Wrench(without the light)
Description
Description:Condition: Brand New
Color: Silver&Black
Material: 304 Stainless Steel, rubber
Feature:
NO need to drilling any holes to your lovely vehicle when install any led lights
Application:
For universal use, can use it on everywhere.
Can mounts any off road drving lights, LED, Halogan, HID light bar&work light, etc;
Apply to all car model, like Jeep, SUV, ATV, UTV, 4x4, Excavator, Marine, etc.
Package Included:
2 x Work Light Bar Mounting Clamp Holder
2 x Hex Allen Wrench
7. Bobrick 699 304 Stainless Steel Recessed Dual Roll Toilet Tissue Dispenser with Hood and Mounting Clamp, Bright Finish, 12-5/16" Width x 6-1/8" Height
Feature
Recessed dual-roll toilet tissue dispenser with hood and mounting clampBright-polished finish
Chrome-plated plastic spindles hold rolls up to 5-18" diameter
Mounting clamps for securing to stud walls or countertop aprons
Measures 12-5/16" width by 6-1/8 height
Description
Recessed dual-roll toilet tissue dispenser. Shell and Flange - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Drawn and beveled, one-piece, seamless construction with four countersunk mounting holes. Support Posts (4) - Heavy-duty cast zamac with chrome-plated finish. Hoods (2) - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. Hoods hinged to shell. Mounting Bracket - Plated-steel mounting clamp attaches to back of unit with two sheet-metal screws for installation in stud walls or countertop aprons. Spindles (2) - Chrome-plated plastic. Equipped with heavy-duty internal springs. Rough Wall Openings: 11-3/4" width x 5-14" height x 3-38" minimum depth (300 x 135 x 85mm). With stainless steel hoods.8. AutoTime LED Light Bar Mounting Brackets, Adjustable Universal Stainless Steel Pillar Hood Led Work Light Mount Clamp Holder for Jeep Truck SUV Truck Sedan Hatchback Wagon Without Drilling (2Pack)
Feature
Strong & Durable- The mount brackets are made of stainless steel and the surface covered with rubber paint, can anti-slip, anti-scratch, anti-rust and anti-corrosion. Guarantees that they can be used in bad weather conditions.Adjustable- The light can achieve 60 horizontal adjustment and 180 vertical adjustment. Assemblies correspond to front, rear, left, and right of the vehicle.
Easy to Install- Universal mounting bracket using,no drilling,no modification required, can install it directly in the car's front hood.
Widely Application- They are compatible with most LED, HID, halogen spotlights/fog lights/driving lights or light bars,DRL etc.
Package & Warranty- 2 x stainless steel brackets (No Including Lamp), 2 x Allen wrench,1 x screw set. We will offer you 12 months warranty as well as lifetime customer support and excellent after-sale service.
Description
Universal Mount Brackets Hood Features(a) 304 stainless steel material can protect the mount bracket from rust, corrosion
(b) The mounting brackets can be compatible with almost all car and led light bar
(c) The light can achieve 60 horizontal adjustment and 180 vertical adjustment
(d) Easy to install, no need to drilling, so lights can be installed directly
(e)Perfectly matched LED strips are mounted on the car, pickup, midsize and large SUV
Specifications
Material: 304 Stainless Steel, Rubber
Color: Black, Silver
Weight: 0.21kg/PC
Package Included
2x Mounting Bracket Clamp Holder (led light is not included)
2 x Allen wrench
1 x screw set
Service Guarantee
We provided 12 months warranty period. If you have any problems with our products, please feel free to contact us, we will provide you with satisfactory after-sales service
9. A Pillar Hood Clamp Holder Off-Road Led Work Light Bar Mount Bracket a Pillar Light Mount Universal Stainless Steel 2pcs
Feature
DURABLE - 304 stainless steel material,a pillar hood clamp holder have excellent performance including anti-corrosion and anti-rust.ANTI-SCRATCH - Designed with loss prevention rubber mats, a pillar light mount will not damage the car surface paint.
ADJUSTABLE - 60horizontal & 180vertical adjustment,assemblies correspond to front, rear, left, and right of the vehicle.
EASY INSTALLATION - Universal mounting bracket using,no drill,no modification required,can install it directly in the car's front hood.
PACKAGE INCLUDES - 2 x stainless steel brackets (No Including Lamp), 4 x L shape Screwdriver,4 x screw.
Description
A Pillar Hood Clamp Holder Off-Road Led Work Light Bar Mount Bracket a Pillar Light Mount Universal Stainless Steel 2pcsFEATURE
Universal mounting bracket, Easy to install.
Made of quality metal material, with anti-corrosion.
Scratch-resistant pedestal with soft rubber covering.
Can mount off-road lights, LED work lights, LED light bar, etc.
SPECIFICATIONS
Condition: 100% new
Color: Silver & Black
Material: Stainless Steel
Size: As pictures show
PACKAGE INCLUDED
2 x LED Bracket (led light is not included)
4 x Screw
4 x L shape Screwdriver
10. Light Bar MountBrackets, 2pcs Universal Hood Led Work Light Bar Mount Bracket Clamp Holder For Jeep Truck Off Road
Feature
Anti-slip Surface:the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint.UniversalIt can be used to install almost all LED Light Pods.Easy to install.No any damage to the car surface paint.
Stable & Durable:Five Screws are enough to tight the light with the car cover tightly.
Made of 304 Stainless Steel, the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion.
Package Include: 2Pcs Mounting Brackets. We Offer One Year Warranty And Excellent Customer Service. If You Have Any Questions, Please Don't Hesitate To Contact Us.
Description
Ansite 2pcs Universal Hood Mount Bracket are made to install the LED light bar in your car's front hood.No need to drill into your vehicle's bodywork to install the off road light bar.
Everything you need for light bar installation are included: 2pcs no-drill mount bracket, 2pcs Allen Hex Wrench, 10 x screws,No light bars.
Features:
Easy to Install;
Compatible with almost all light bars;
304 Stainless Steel can protect the mount bracket from rust, corrosion;
5pcs Screws design can enhance the stable and durable for a long time;
We Offer One Year Warranty And Excellent Customer Service. If You Have Any Questions, Please Don't Hesitate To Contact Us.
Recent Comments