Top 10 ford bronco headers 5.0 for 2024
If you looking for ford bronco headers 5.0 then you are right place. We are searching for the best ford bronco headers 5.0 on the market and analyze these products to provide you the best choice.
Best ford bronco headers 5.0
1. Pace Setter 70-1322 Black Shorty Exhaust Header
Feature
CNC-machined, port-matched thick steel flanges provide postive seal at the head and unrestriced flow into the primary tubesAll tubing is mandrel-bent, 16-gauge carbon steel for excellent durability
Available with standard black paint finish or optional ARMOR*Coat metallic ceramic coating
Unsurpassed fit and easy to install with basic skills
Gaskets included
Description
Affordably priced PaceSetter Headers are one of the best ways to improve your vehicle's performance and efficiency. By reducing exhaust back pressure and scavenging the cylinders better, headers (sometime referred to as tubular exhaust manifolds) provide a noticeable improvement for any application. These Shorty Headers bolt on in place of the stock exhaust manifolds for greater engine efficiency. Fits 87-95 Ford F150and F250 (exc. HD) pickup and Bronco, 5.0L.2. For Ford Bronco 4.7/5.0L V8 2PC Stainless Steel Long Tube Exhaust Header
Feature
High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i.e. Maximizing Smoothest High Exhaust Air Flow Rate4-1 High Performance Racing Spec. Design, Produces the Most Top End Power
Offers the Best Flow Characteristics for the Engine at High Engine Speeds
Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq.
Inlet/Outlet: 1.5"(OD)/ 3.00"(OD) / 2.5" Exhaust Collector Reducer / 16 Gauge Wall Piping / Metal Gasket Included
Description
The exhaust manifolds found in the 1966-1977 Small Block Ford powered Broncos were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 4.7L(289ci) and 5.0L(302ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:
Compatible with:
3. Black Coated Performance Exhaust Header System For 87-95 Ford F150 & Bronco 5.0L V8 Pickup Truck
Feature
Fits: 1987-1995 Ford Pickup & Bronco 5.0L V8 Pickup Truck16-Gauge Mild Steel & Black Coated For Durability
Tube Diameter: 1.50". Collector Diameter: 2.50"
Flanged Connection. Replaces Factory Exhaust Manifolds & Retain OEM/Factory Catalytic Converter
Bolts & Gaskets Included. Quality & Affordable Products
Description
Getting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders; thus, the back pressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potential.4. ACUMSTE Exhaust Manifold Header Stainless Exhaust Header Fit for 1966-1977 Ford Bronco 289/302 4.7/5.0 V8
Feature
Fit for: 1966-1977 Ford Bronco 289/302 4.7/5.0 V8.Inlet/ Outlet: 1.5" OD / 3" OD; Made of High Quality T304 Stainless Steel Material; Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq; TIG Welded CNC Machine Flange.
100% Brand New, O2 Sensor Insertion and Metal Gasket Included. Professional Installation is Highly Recommended (No Instruction Included).
Packing list: 1X Set of Header Exhaust System.
Description
Features:Inlet/ Outlet: 1.5" OD / 3" OD
Made of High Quality T304 Stainless Steel Material
Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq.
TIG Welded CNC Machine Flange
O2 Sensor Insertion and Metal Gasket Included
100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)
Fit for:
1966-1977 Ford Bronco 289/302 4.7/5.0 V8
5. Flowtech 91627FLT Shorty Smog Headers
Feature
Mandrel-bent tubing for smooth exhaust flowSturdy 16 gauge tubing
Extra thick 3/8 flanges for a leak-free seal
Designed as a direct fit replacement for OEM exhaust manifolds
Will accommodate all emission control devices
Description
These Shorty Smog Headers bolt on quickly and easily to the factory exhaust system, retaining all stock emissions equipment, and offering maximum horsepower gains plus increased efficiency. This header is designed for 1987 - 1995 Ford F150/250/Bronco, 2/4-wheel drive, 5.0L engines. Mandrel-bent tubing for smooth exhaust flow with a black high temp paint.6. Catinbow Stainless Steel Racing Manifold Header Exhaust for 1966-1977 Ford Bronco 289 302 4.7 5.0 V8
Feature
FEATRUE: Header Inlet / Outlet Size (IN):1.5" OD / 3" OD.The exhaust manifolds free up lost horsepower and torque, an added benefit is a more performance oriented exhaust sound, better air flow design, improves exhaust velocity performance, offers great flow and higher power gain.COMPATIBLE WITH: 1966-1977 Ford Bronco 289 302 4.7 5.0 V8
HIGH QUALITY: Made from high quality T304 Stainless Steel for strength & durability, Constructed with TIG welded CNC machine flange for precision & fitment.
EASY TO INSTALL : Direct Bolt-On Installation, Requires No Modification. Professional Installation is Highly Recommended (No Instruction Included).
NOTE: Perfect Match for the Original Car, Please verify Fitment or Application, check your car model, make and year before your payment, Fast shipping from USA.
Description
Catinbow is a professional automotive & motorcycle parts and accessories supplier, we settle down to providing best products and professional after-sale service.
The exhaust manifolds Headers are one of the easiest bolt-on accessories you can use to improve an engine's performance. The goal of headers is to make it easier for the engine to push exhaust gases out of the cylinders.
Item Specification:
High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i.e. Maximizing Smoothest High Exhaust Air Flow Rate
4-1 High Performance Racing Spec. Design, Produces the Most Top End Power
Offers the Best Flow Characteristics for the Engine at High Engine Speeds
Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq.
Inlet/ Outlet: 1.5" OD / 3.00" OD
2.5" Exhaust Collector Reducer
16 Gauge Wall Piping
TIG Welded CNC Machine Flange
Metal Gasket Included
Fitments:
1966-1977 Ford Bronco 289 302 4.7 5.0 V8
Package Included:
1 X Set of Header Exhaust System
Gasket(s) and Bolt(s)
As shown in the Picture above
(ALL if any is necessary for Installation)
7. JBA 1627S 1-1/2" Shorty Stainless Steel Exhaust Header for Ford Truck 5.0L 87-95
Feature
Mandrel bent stainless steel tubePatented JBA Firecone collector
Factory style emission connections
Extra thick collector domes
3/8 inch thick CNC laser-cut flanges with oversized exhaust ports
Description
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rod magazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers are significantly less restrictive than the stock manifolds on a vehicle and dramatically increase the power and efficiency of an engine. JBA's original shorty design is an innovation of the old long tube header. The new shorty designs yield high performance gains that hot rodders and enthusiasts look for. With durable stainless steel construction that can survive the abuse of racing, towing, and daily driving, these headers can take a beating. With heavy duty features and patented technology, like the JBA Firecone collector, JBA shorty headers have the capacity to produce more power than any other shorty headers on the market. Each system includes high quality hardware and thorough instructions for a professional no-leak installation.8. NEW RADIATOR ASSEMBLY FITS FORD 92-97 BRONCO F150 F250 F350 F450 5.0L 5.8L 7.5L V8 F2TZ8005KA FO3010134 2183 CU1451 FD37003A
Feature
100% NEW and Made with the Highest Quality Components AvailableFull One Year Warranty
Computer tested for consistent Quality and unsurpassed reliability
Radiator - Accessories Included: OC Adapters (1/2"-2 Unf) And Speed Nut (M6 X P1.) And Cilp For S.P. Rows: 2 Core Size: 27 9/16" x 17 7/8" x 2 1/4" Bottom Header: 3 1/16" x 18 1/2" Top Header: 3
Description
REPLACES:
FORD: F2TZ8005KA
PARTSLINK: FO3010134
ITEM DESCRIPTION: RADIATOR ASSEMBLY
UNIT TYPE: FORD
ROWS: 1
TOP HEADER: 3 1/16" X 18 1/2"
BOTTOM HEADER: 3 1/16" X 18 1/2"
CORE SIZE: 27 9/16" X 17 7/8" X 2 1/4"
MANUFACTURED MATERIAL: PLASTIC/ALUMINUM
ACCESSORIES INCLUDED: OC ADAPTERS (1/2"-2 UNF) AND SPEED NUT (M6 X P1.) AND CILP FOR S.P.
APPLICATIONS:
PLEASE VERIFY YOUR OEM PART NUMBER FROM YOUR ORIGINAL UNIT TO HELP ENSURE FITMENT.
FORD BRONCO 5.0L V8 302 CID 1992-1996 W/ SUPER DUTY COOLING
FORD BRONCO 5.8L V8 351 CID 1992-1996 W/ SUPER DUTY COOLING
FORD F-150 5.0L V8 302 CID 1992-1996 W/ SUPER DUTY COOLING
FORD F-150 5.8L V8 351 CID 1992-1996 W/ SUPER DUTY COOLING
FORD F-250 5.0L V8 302 CID 1992-1997 W/ SUPER DUTY COOLING
FORD F-250 5.8L V8 351 CID 1992-1996 W/ SUPER DUTY COOLING
FORD F-250 5.8L V8 5752CC 351 CID 1997 W/ SUPER DUTY COOLING
FORD F-250 7.5L V8 460 CID 1992-1996 W/ SUPER DUTY COOLING
FORD F-250 7.5L V8 460 CID 1987-1991
FORD F-350 5.0L V8 302 CID 1995-1997 W/ SUPER DUTY COOLING
FORD F-350 5.8L V8 351 CID 1992-1997 W/ SUPER DUTY COOLING
FORD F-350 7.5L V8 460 CID 1992-1997 W/ SUPER DUTY COOLING
FORD F-350 7.5L V8 460 CID 1987-1991
FORD F-450 7.5L V8 460 CID 1997 W/ SUPER DUTY COOLING
9. COMP Cams K35-302-8 Magnum Computer Controlled 210/215 Hydraulic Roller Cam K-Kit for Ford 5.0L
Feature
Mass air, 5 speed or 2500+ stall, heads, intake, headers, 3.55-3.73 gears.2,000-5,500 RPM Operating Range
220/224 Duration at .050". 112 Degree Lobe Separation Angle. 0.512"/0.533" Valve Lift
K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, decals and instructions. Check description for more accurate listing of kit contents.
The Computer Controlled grind family includes grinds for both stock and modified EFI systems, with a wide variety of stages for significant power gains.
Designed for throttle body injected and tuned port injected engines.
Fits Ford 5.0 HO
Made in USA
Description
Mass air, 5 speed or 2500+ stall, heads, intake, headers, 3.55-3.73 gears. K35-302-8 contains the following: 35-302-8 Magnum Computer Controlled 210/215 Hydraulic Roller Cam for Ford 5.0L, 851-16 OE-Style Hydraulic Roller Lifter Set for Ford 5.0 and Retro-Fit Roller Engines, 2138 Magnum Double Row Timing Set for '84-'92 Ford 5.0L, 302 and 351W, 986-16 Valve Springs, 611-16 Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess, 740-16 10 Degree Superlock Steel Retainer Set of 16 for 1.437"-1.500" OD Valve Spring, 503-16 Set of 16 PTFE Valve Seals for .530" Guide Size, 11/32" Valve Stem10. OBX Exhaust Header Manifold 87-95 FORD BRONCO I II F150 F250 V8 5.0L
Feature
Shorty Style High quality T-304 stainless steelGaskets & Hardware included
CNC machine flanges with DUAL-TIG welded construction
Lifetime warranty from manufacturer defects
OBX Genuine Products Design and Quality of OBX U.S.A
Description
OBX High performance racing headers are made out of pure SUS-304 stainless steel. Dyno tested at low end and top speed to increase horsepower. Precision mandrel-bend to enhance exhaust gas flow. These one piece type headers are easy to install. Value-added bolt-on headers for any racing sport performance enthusiast.16 Gauge Runner Wall, 0.4" flange, 1 3/4" primaries pipes, 3.0" Collector
Recent Comments