Top 10 best t-slot milling cutters
Finding the best t-slot milling cutters suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best t-slot milling cutters
1. Milling Cutter 4mm Depth 25mm Cutting Dia 8 Flutes HSS T Slot End Mill
Feature
Product Name : T Slot End Mill;Material : HSSColor : Gray;Flute : 8
Cutting Diameter : 25mm/1";Cutting Depth : 4mm/ 5/32"
Shank Diameter : 12mm/31/64'';Total Length : 90mm/3.5''
Net Weight : 79g;Package Content : 1 x T Slot End Mill1 x Case
Description
- Straight shank, 8 flutes, T shaped slot, HSS material.
- Used widely for milling steel, aluminum, copper and iron.
2. 2Pcs 1/4" Shank T-Slot Cutter Router Bit Steel Handle Slotting Milling Cutters 3/8" & 1/2" Length Woodworking Mills For Power Tools (Blue)
Feature
With high precision, smooth cutting, impact resistance, good wear resistance.Used for slotting a wide range of materials including density board, solid wood, chipboard etc.
Suitable for hand held electric drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
Enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole.
Package included: 1 x T-Slot Cutter Router Bit for 1/2" Hex Bolt ; 1 x T-Slot Cutter Router Bit for 3/8" Hex Bolt.
Description
Specification:Body Material: solid hardened steel
Blade Material: carbide alloy
Coating: Yes
Shank diameter: 6.35mm (1/4")
Head Length: Approx. 3/8"(9.52mm) & 1/2"(12.7mm)
Package included:
1 x T-Slot Cutter Router Bit for 1/2" Hex Bolt
1 x T-Slot Cutter Router Bit for 3/8" Hex Bolt
Tips:
Please allow 1-2mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
3. DealMux HSS-AL 25/32 x 5/32 Straight Shank 8 Flutes T Slot Milling Cutter
Feature
Product Name: T Slot CutterMaterial: HSS-AL, Metal; Color: Gray
Cutting Diameter: 20mm/ 25/32'; Cutting Depth: 4mm/ 5/32'
Shank Diameter: 10mm / 0.4'; Total Length: 67mm / 2.6'
Net Weight: 90g; Package Content: 1 x T Slot Cutter; 1 x Case
Description
Used widely for milling steel, aluminum, copper and iron.It features straight shank, T slot type, HSS-AL material 7 flutes.4. Yakamoz 1/4" Shank T-Slot Router Bit T-Track Slotting Carbide Wood Milling Cutter
Feature
1/4 Inch Shank, 1-1/16" wide x 5/16" high heads with 3/8" shaft diameter x 1/2" high shaft, overall cutting height 13/16''.Premium quality C3 Micro-grain Carbide Cutters with Silver induction brazing for maximum strength
Build your own sturdy, attractive, slotted wall to display items from garden tools and power tools to toys - hanging by a hook.
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
Cuts all composition materials, plywoods, hardwoods, and softwoods.
Description
Yakamoz 1/4" Shank T-Slot T-Track Slotting Router Bit
Feature:
Industrial quality router bits.
Industrial grade micro grain carbide cutter.
Alloy blade with high-grade welding, stable quality, high efficiency.
Solid hardened bodies with anti-kickback design.
Build-up & heat resistant teflon coating.
Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch.
Specifications:
Blade Material: Industrial Grade Micro Grain Carbide
Body Material: Carbide Tipped
Shank Size: 1/4"
Cutting Head Size: 1-1/16" wide x 5/16" high
Cutting Shaft Size: 3/8" diameter x 1/2" high
Overall Cutting Height: 13/16''
Package Includes:
1 x Router Bit
5. uxcell 12mm Cutting Dia 3mm Cutting Depth 6 Flutes Straight Shank T Slot Milling Cutter
Feature
Product Name: T Slot Milling Cutter; Package Content: 1 x T Slot Milling Cutter, 1 x CaseMain Color: Silver Tone; Material: HSS
Weight: 38g; Cutting Dia: 12mm/0.47"
Cutting Depth: 3mm/0.12"; Shank Dia: 10mm/0.4"
Overall Length: 62mm/2.44"; Flute Number: 6
Description
For milling, roughing and finishing to make a T-Slot at high speeds and feeds.Used widely for milling steel,stainless steel,aluminum, copper and iron.
6. Eyech 1/4 Inch ShankStraight T Slot Router Bit & T-Track Slotting Cutter Carbide Wood Milling Cutter Woodworking Drill Bit Tool
Feature
The Size of this T slot cutter router bit is 1/4 inch shank, 1-1/16inch wide, 5/16inch high, heads with 3/8 inch shaft diameter, overall cutting height 13/16 inch.The T-type high-grade straight edge router bit is YG6 Alloy blade with high-grade Welding, More stable, high efficiency. Make stock producing cleaner, splinter free.
Used for slotting and drilling a wide range of materials, cuts all composition materials such as density board, solid wood, hardwoods, softwoods, chipboard, plywood, etc.
Suitable for hand held electric drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. It also used on electric trimmers or engraving machines for wood slotting.
Solid hardened steel bodies with anti kickback design. Build-up & heat resistant teflon coating, sharp edge, high hardness,accurate positioning,high precision,smooth cutting,impact resistance.
Description
Eyech 1/4 inch Shank T-Slot T-Track Slotting Router Bit
Feature:
Industrial quality router bits.
Industrial grade micro grain carbide cutter.
Alloy blade with high-grade welding, stable quality, high efficiency.
Solid hardened bodies with anti-kickback design.
Build-up & heat resistant teflon coating.
Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch.
Specification:
Body: Solid hardened Steel
Shank Diameter: 1/4"(6.35mm)
Cutting Length : 13/16"(20.6mm)
Cutting Head Size: 1-1/16" wide x 5/16" high
Cutting Shaft Size: 3/8" diameter x 1/2" high
Largest Diameter: 1-1/16"(26.9mm)
Overall Length : 2-1/16"(52.4mm)
Package includes:
1pcs Router Bit
7. uxcell T Slot Router Bit 1/4 Shank 1/8 Cutting Depth 2 Flutes HSS Undercut Woodworking Cutter Grooving Tool
Feature
Shank Diameter: 6.3mm/1/4"; Cutting Depth: 3mm/1/8"Cutting Diameter: 32mm/1.25"; Total Length: 40mm/1.6; Material: HSS (High Speed Steel)
Control cut design helps minimize kickback. Wide and narrow flute design requires lower feed rates to prevent breakage.
Used for routing mounting slots in picture frame, plaque and wall decoration. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
T slotting router bit is widely used for wood perforation, spherical door tip installation, drawer tip, plastic products, wood, plywood, density board, solid wood, MDF, chipboard etc.
Description
Features:Sharp edge, high hardness, accurate positioning, high precision, smooth cutting, impact resistance, high toughness.
Enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole.
More sharp and durable blade, its' head adopts arc curve design, beneficial to chip removal, perforation is more efficient.
Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
T slotting router bit is widely used for wood perforation, spherical door tip installation, drawer tip, plastic products, wood, plywood etc.
Specifications:
Product Name: T Slotting Router Bit
Material: HSS (High Speed Steel)
Net Weight: 25g
Standard: 1/4x1/8 inch
Shank Diameter: 6.3mm/1/4 inch
Cutting Diameter: 32mm/1.25 inch
Cutting Depth: 3mm/1/8 inch
Total Length: 40mm/1.6 inch
Package Contents:
1 x Grooving Cutter Bit
1 x Plastic Case
8. Bestgle 2Pcs T-Slot Cutter Router Bit Slotting Milling Woodworking Cutter for 3/8" & 1/2" Hex Bolt Heads, 1/4-Inch Shank
Feature
Sharp edge, high hardness, accurate positioning,high precision,smooth cutting,impact resistance,high toughnessThe blade more sharp and durable, it's head adopt arc curve design,beneficial to chip removal, perforation is more efficient
Used for wood perforation, spherical door tip installation, drawer tip, plastic products, wood, plywood etc
Woodworking cutter designed for portable and desktop woodworking engraving machine design, can not be used in electric drill, drilling machine and the like
Package included: 1 x T-Slot Cutter Router Bit for 1/2" Hex Bolt ; 1 x T-Slot Cutter Router Bit for 3/8" Hex Bolt |Note: It is suitable for ordinary pine wood or softwood. Hardwood and density boards are not suitable for those that are easy to consume excessively.
Description
Features
Alloy blade with high-grade welding, stable quality, high efficiency. long service life
Enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole
Suitable for hand held electric drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
It can be used for slotting a wide range of materials including density board, solid wood, MDF, chipboard, plywood, etc
Specification:
Body Material: solid hardened steel
Blade Material: Carbide alloy
Blue:
Total Length: Approx. 1-3/4"
Shank Diameter: Approx. 1/4"(6.35mm)
Cutting Length: Approx. 3/8"(9.52mm)
Yellow:
Total Length: Approx. 1-3/4"
Shank Diameter: Approx. 1/4"(6.35mm)
Cutting Length: Approx.1/2"(12.7mm)
Package included:
1 x T-Slot Cutter Router Bit for 3/8" Hex Bolt
1 x T-Slot Cutter Router Bit for 1/2" Hex Bolt
9. 1/2" HIGH SPEED STEEL T-SLOT CUTTER (2006-0167)
Feature
Rugged design with free cutting features.Cutters have positive radial rake, right and left hand spiral with alternate side cutting teeth for maximum chip clearance.
Bolt size is 1/2" bolt size.
31/32" cutter diameter.
25/64" cutter width.
Description
High speed steel. Rugged design with free cutting features. Cutters have positive radial rake, right and left hand spiral with alternate side cutting teeth for maximum chip clearance.10. Bestgle 1/2" Shank Straight T-Slot & T-Track Slotting Cutter Router Bit Wood Groove Milling Cutter Woodworking Tool, 1-1/16 Inch Diameter
Feature
Solid hardened steel bodies with anti kickback design. Build-up & heat resistant teflon coatingT-type High-grade Straight Edge Router Bit, YG6 Alloy Blade with High-grade Welding, Stable Quality, High Efficiency
Enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole
This T-Track Router Bit cuts T-slots for T-track bolts with 1-1/16" wide x 5-16" high bolt heads and up to with 3/8" shaft thickness
Used for drilling, installation of the drawer door spherical tip, tip, slat wall boards, plastic products, wood, plywood, etc. more trepanning
Description
Specification:
Body: Solid hardened Steel
Shank Diameter: 1/2"/12.7mm
Cutting Diameter: 1-1/6"/26.95mm
Cutting Length: 25/32"/19.84mm
Overall Length: 2-3/8"/60mm
Package includes:
1pcs Router Bit
Recent Comments