Top 10 best shaft alignment set for 2024
Finding the best shaft alignment set suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best shaft alignment set
1. Starrett S668A Shaft Alignment Clamp Set Without Case
Feature
Set includes: 1 each chain clamp, extension plate, posts (5", 7-7/16", 9'), without caseLightweight clamp design made of black anodized aluminum
Rigid 3/8" diameter stainless steel indicator posts provided in three lengths (5", 7-7/16", and 9")
Extension plate allows for added radial clearance
Heavy-duty roller chain can accommodate up to a 7-1/2" diameter shaft
Description
The starrett shaft alignment clamp is designed for fast, precise alignment of motors, pumps, compressors, etc. This system is capable of addressing radial and angular misalignment problems and can be set up within minutes.2. Starrett S668CZ Shaft Alignment Clamp Set With Fitted Case
Feature
Secures two gauges for performing radial and angular alignment of motors, pumps, and compressorsRoller chain clamps accommodate up to a 7.5" diameter shaft
Dial indicator gauges are graduated to 0.001" with a travel range to 0.2"
Knurled, rotating bezel to set gauge zero position
Extension plates provide added radial clearance
Description
The Starrett S668CZ shaft alignment clamp set includes two chain clamps, two 196B5 back-plunger dial indicator gauges, two PT18724 snugs, two extension plates, and various posts to perform radial and angular alignment of motors, pumps, and compressors. The set comes in a fitted case for organization and protection.
The clamp set provides a pair of indicator gauges to measure alignment distortion, with a configurable armature to secure the gauges in position on two axes. The two chain clamps consist of a black anodized aluminum frame with a roller chain that can secure the clamp around a shaft up to 7.5 inches in diameter. The three pairs of 3/8-inch diameter posts measure to 5, 7-7/16, and 9 in length, and are made of stainless steel for rigidity. Two extension plates provide additional radial clearance when needed. Two stainless steel snugs secure one post to another, to hold the gauges in measuring position. The two 196B5 back-plunger dial indicator gauges have three contact points and are graduated to 0.001, with a travel range to 0.2 The gauges have a 0.25 shank, a white dial face with numbers ascending from 0 to 50 and descending back to 0, and a rotating knurled bezel to set the dial pointer to the zero position.
Clamps are fastening tools that use pressure to secure workpieces to each other or to a workspace, and prevent movement. Clamp style varies widely, depending on general and specialized applications. Many clamps are for temporary use during construction, repair, or alignment of a workpiece, while others may be used to secure a component in its final installation or assembly.
The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
Whats in the Box?
- Two chain clamps
- Two 1965B back-plunger dial indicator gauges
- Two PT18724 snugs
- Two extension plates
- Two 5 posts
- Two 7-7/16 posts
- Two 9 posts
- Fitted case
3. Starrett S668DZ Shaft Alignment Clamp Set With Fitted Case
Feature
Secures two gauges for performing radial and angular alignment of motors, pumps, and compressorsRoller chain clamps accommodate up to a 7.5" diameter shaft
Dial indicator gauges are graduated to 0.001" with a travel range to 0.25"
Hardened steel gear trains and jeweled bearings are shock-resistant
Extension plates provide added radial clearance
Description
The Starrett S668DZ shaft alignment clamp set includes two chain clamps, two 81-141J dial indicator gauges with lug-on-center backs, two PT18724 snugs, two extension plates, and various posts to perform radial and angular alignment of motors, pumps, and compressors. The set comes in a fitted case for organization and protection.
The clamp set provides a pair of indicator gauges to measure alignment distortion, with a configurable armature to secure the gauges in position on two axes. The two chain clamps consist of a black anodized aluminum frame with a roller chain that can secure the clamp around a shaft up to 7.5 inches in diameter. The three pairs of 3/8-inch diameter posts measure to 5", 7-7/16", and 9" in length, and are made of stainless steel for rigidity. Two extension plates provide additional radial clearance when needed. Two stainless steel snugs secure one post to another, to hold the gauges in measuring position. The two 81-141J dial indicator gauges have shockless, hardened steel gear trains and low-friction jeweled bearings to withstand excessive vibrations and impact. The three contact points on the gauges are graduated to 0.001", with a total travel range of 0.25". The gauges have a 0.375" diameter stem, a white dial face with numbers ascending from 0 to 50 and descending back to 0, and a rotating knurled bezel to set the dial pointer to the zero position.
Clamps are fastening tools that use pressure to secure workpieces to each other or to a workspace, and prevent movement. Clamp style varies widely, depending on general and specialized applications. Many clamps are for temporary use during construction, repair, or alignment of a workpiece, while others may be used to secure a component in its final installation or assembly.
The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
Whats in the Box?
- Two chain clamps
- Two 81-141J dial indicator gauges
- Two PT18724 snugs
- Two extension plates
- Two 5" posts
- Two 7-7/16" posts
- Two 9" posts
- Fitted case
4. Starrett S668BZ Shaft Alignment Clamp Set With Fitted Case
Feature
Set includes: 2 each chain clamp, extension plate, posts (5", 7-7/16', 9"), with fitted caseLightweight clamp design made of black anodized aluminum
Rigid 3/8" diameter stainless steel indicator posts provided in three lengths (5", 7-7/16", and 9")
Extension plate allows for added radial clearance
Heavy-duty roller chain can accommodate up to a 7-1/2" diameter shaft
Description
The starrett shaft alignment clamp is designed for fast, precise alignment of motors, pumps, compressors, etc. This system is capable of addressing radial and angular misalignment problems and can be set up within minutes.5. CHEERBRIGHT 4 Pieces SHF Aluminum Linear Bearing Rod Rail Shaft Support Motion (8mm, 12mm, 16mm, 20mm)
Feature
Material is made of AluminumShaft diameter:8mm, 12mm, 16mm, 20mm
Anti-rust,corrosion-resistant and good appearance.
Easy to install, easy to operate.
A shaft mounting portion has a slit for facilitate the bolt fastening shaft.
Description
DESCRIPTION:
100% quality and Brand new.
This product mainly used for the linear axis up, both sides of the wall can be bolted in machinery, so that the linear bearing or slider, in axis movement back and forth, and complete mechanical function.
MATERIAL: Aluminum Alloy
The surface treatment is sand blasting, oxidation.
PRODUCT SIZE:
Shaft diameter:8mm, 12mm, 16mm, 20mm
PACKAGE INCLUDED: 4 Pieces Linear Rod shaft Support
6. Automotive Cars Engine Camshaft Alignment Timing Tool Set For AUDI Fo VW 2.0L FSi TFSi Chain Tensioner Locking Pins
Feature
100% brand new and high quality.Universal fit for AUDI fo VW.
A carry case for protable taken and so conveninet.
It is a professional and practical crankshaft camshaft engine alignment timing tool set.
High performance and exquisite workmanship.
Description
Features:
100% brand new and high quality.
Universal fit for AUDI fo VW.
A carry case for protable taken and so conveninet.
It is a professional and practical crankshaft camshaft engine alignment timing tool set.
High performance and exquisite workmanship.
Specifications:
Item Size:25.5*3*0.5cm
Carry Case Size:29*22*6cm
Case Color:red
Type:Camshaft Locking Block (T10252)/Chain Tensioner Retainer/Locking Pins (T10115)/Pin Wrench (T10020) and Tensioner Bolt/camshaft tools/tensioner bolt
Suitable :Fit for 2.0 FSI petrol engines since 2003 in:
for Audi: A3 2.0 FSI and FSI SOHC
Engine codes:for AWA, for BHD,for BMB
for VW: Golf 2.0 FSI , 2.0 FSI
for SOHC and for Touran 2.0 FSI SOHC
Engine codes:for AWA,for AXW
Suitable for 2.0 Liter FSI engines. For example: Audi A3, VW Golf / Touran (since 2004)
Engine Codes:for AWA /for AXW / for BHD /for BMB
Package included:
1 x Cars Engine Camshaft Alignment Timing Tool Set
1 x Carry Case
7. WIN.MAX Compatible for Camshaft Alignment Set Engine Timing Tools Kit for BMW N51/N52/N53/N54/N55
Feature
The items you ordered will be shipped out in 1-2 business day from CAUSA. And you will receive it in one week.Installing and removal of camshaft/ variable camshaft timing unit.
Checking and adjustment of timing.
E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi
E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i E64/E65: 630i,730i E66/E70: 730Li,X5 3.0Si E81/E82: 130i,135is E93: 325i,328i,330i,335i E83: X3 2.5i,2.5Si,3.0i,3.0Si E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i
Description
Installing and removal of camshaft/ variable camshaft timing unit. Checking and adjustment of timing. Applicable: BMW N51, N52, N53, N54, N55 engine. E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i E64/E65: 630i,730i E66/E70: 730Li,X5 3.0Si E81/E82: 130i,135is E93: 325i,328i,330i,335i E83: X3 2.5i,2.5Si,3.0i,3.0Si E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i8. Set Screw Shaft Collar Bore 1/2" Width 0.4375 inch 304 Stainless Steel Silvery 4Pcs
Feature
Product Name : 1/2" 304 Stainless Steel Shaft Collar ;Material : 304 Stainless Steel ; Collar Style: Clamp Outside ;
Bore Diameter : 1/2 (0.5 inch / 12.7mm) ;Outside Diameter : 1" (25.4mm) ;
Width : 7/16" (0.4375 inch / 11.1125mm) ; Tolerance: +.0005/+.0025 ;
Package : 4Pcs Shaft Collar
Description
Setscrew shaft collar for applications supporting low axial loads and simple positioning, It is commonly used for guiding, spacing, stopping, mounting, and component alignment This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it.
9. Liyafy 4mm to 5mm Bore Motor Shaft Coupling Universal Joint Connector with Set Screws for RC Boat Car for 4Pcs
Feature
Outer diameter: 11mm Length: 23mm;Connection Diameter: 4mm to 5mm/0.15 inch to 0.19 inchAllow the angle between the two axes within a limited range vary with operational needs
The metal universal joint is suitable for straight shaft motors,use for model cars, model ships, robots and other types of metal transfer
The coupling is great replacement for your old or broken one
Provides torque transmision and alignment;Package Content: 4 x Universal Joint and screws
Description
Material:metal plating Color:Silver Outer diameter: 11mm Length: 23mm Fitment:Brushless motor rc boat use Dimension:23 x 11mm/0.91 x 0.43"(L x Dia)10. Titan Flange Alignment Pin Set with Case, Contains 2 Units of pin Sizes 3/4", 7/8", 1", 1-1/8", 1-1/4",1-3/8"
Feature
Titan flange alignment pins from SMP are safe, fast, and effective.The Titan flange alignment pin's tapered shaft is a patented feature that eliminates the need for hammering and prying when lining up flange bolt holes.
Titan flange alignment pins eliminate the need for hammering drift pins or fighting with spud wrenches.
Titan flange alignment pins are the only flange alignment pins on the market that compensate for up and down, as well as rotational misalignment.
The simplicity of the Titan flange alignment pins make them the most affordable flange alignment solution on the market.
Recent Comments