Top 10 best raspberry pi battery ups: Which is the best one in 2024?
When you want to find raspberry pi battery ups, you may need to consider between many choices. Finding the best raspberry pi battery ups is not an easy task. In this post, we create a very short list about top 10 the best raspberry pi battery ups for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 raspberry pi battery ups:
Best raspberry pi battery ups
1. kuman UPS Battery Pack Expansion Board Power Supply for Raspberry Pi 3 Model B, B+,Pi 2 Model B & Pi 1 Model B+ A+ A (New Version Raspberry pi Battery Pack)
Feature
Support ups so that the battery pack can supply power even when the adapter is removed.With 2 battery parallel sockets, it is easy to expand the 3. 7V lithium battery capacity.
With battery indicator design, a clear understanding of battery power at 25%, 50%, 75%, 100% status.
With battery capacity detection connector, The system can detect battery capacity conveniently.
The Raspberry Pi fan interface does not occupy rpio interface of the rpi; it can also be used as the rpi GPIO 5V power supply interface through the DuPont line(no Micro USB cable required).
Description
Features: Support UPS function, output DC5V while charging(will not be interrupted). With battery detection interface, always check the battery's power. The power-on state can automatically detect the load and start the output function, and automatically turn off the output when there is no load. The size and mounting holes are exactly the same as the Raspberry Pi for easier installation and use. It's convenient to power on / off raspberry pi via battery switch; It can last about 9 hours if only pi 3. The Lithium battery expansion board can be also used on cellphone. Battery capacity: 3800mAh Maximum output current: 2A Output voltage: 5. 1V 0. 1V Standard charging current / voltage: 2A/5. 0V Package included: 1 x Lithium Battery Expansion board (with lithium battery) 4 x Copper standoff 4 x Screw 4 x Nut 1 x Micro USB cable2. Miuzei Raspberry Pi 3/3 Model B+ Battery Pack Expansion Board, Power Supply with USB Cable, 2 Layer Acrylic Case for Raspberry Pi 3 B+, 3B, 2B
Feature
Battery pack expansion board for raspberry pi 3 model B+ / 3 / 2 Model A A+ B B+Work up to 9 hours with 3800mAh capacity battery, output current: 1.8A
It's easy to turn ON/OFF the battery with the power switch on the battery board
Come with 2 pieces acrylic plates and special design micro USB cable, make pi and the battery combine together well
Easy to install and fasten the raspberry pi board on the 2 pcs layers with fastening standoffs, screws and nuts
Description
The lithium battery expansion board is designed for convenient use when met no power to root your pi there. It can support the pi 3 board with up to 9 hours in general. It also come with two acrylic durable plates and make your pi, battery pack stand together very well. Pi case is a perfect fit for your Raspberry Pi 3/ 3b/ 2/ 2b/ b.Note:Please tear off the Protective Film from both sides of the layers before you assembled it.
The pi will reboot when the power supply changed from the charger to battery
Features:
Battery capacity: 3800mAH
Maximum output current: 1.8A
Output voltage: 5.1V 0.1V
Standard charging current/voltage: 1.0A/5.0V
Cut-off voltage of fully charging: 4.18V - 4.2V
Package includes:
1 x Rpi Battery Expansion board (with lithium battery)
4 x Copper standoff
4 x Screws
4 x Nuts
2 x layer Acrylic Board
1 x Micro USB cable
3. Smraza Raspberry Pi 3 B+ Battery Pack Expansion Board RPI 3 Model B+ USB Battery Pack with Acrylic Case for Raspberry Pi 3 B+(Plus), 3B, 2B
Feature
Upgraded version - Support UPS so that the battery pack can supply power even when the adapter is removed. Battery pack expansion board specially designed for Raspberry pi 3 model B+, matching with Pi 3B 2B.Battery capacity: 3800mAh. Output current: 2A. Expandable with 2 * 3.7V lithium batteries. With battery power detection port, it is convenient for the system to detect battery power.
The on/off switch is handy - you can shut down the raspberry pi by the switch on the battery pack., saves on wear and tear. No more yanking the cord from the Pi, or unplugging from the source. With a battery indicator, you can know the remaining battery at any time.
With raspberry pi fan power interface - can be used for connecting Raspberry pi fan(Need to solder pins of fan) without occupying the Raspberry Pi GPIO.
Easy to install - Come with 2 pieces acrylic plates and special design micro USB cable, make pi and the battery combine together well. It also comes with 3pcs aluminium heat sinks and 1pc crystal screwdriver, it's easy to install.
Description
Upgraded version Battery pack expansion board for Raspberry Pi 3 Model B , compatible with Raspberry Pi 3/ 3b/ 2/ 2b/ b.The battery could rechargeable and you could shut down the raspberry pi by the switch on the battery pack. Do not need to unplug and plug every time you wish to restart. Or if you do not like the red light always on when not using the pi.
Features:
* Provide UPS on power failure.
* Expandable with 2 * 3.7V lithium batteries.
* The pi will not reboot when the power supply changed from the charger to battery.
*With a LED battery indicator, you can know the remaining power at any time.
*With raspberry pi fan power interface can be used for connecting Raspberry pi fan without occupying the Raspberry Pi GPIO.
*Can automatically detect the load and output 5V when the switch turn on and automatically cut off the 5V output in 20 seconds when plug out.
Specification:
Battery capacity: 3800mAH
Maximum output current: 2A
Output voltage: 5.1V 0.1V
Standard charging current / voltage: 1.0A/5.0V
Cut-off voltage of fully charging: 4.18V - 4.2V
Note:
Please tear off the Protective Film from both sides of the acrylic layers before you assembled it.
Package Included:
1 x Rpi battery expansion board (with lithium battery)
4 x Copper standoff
4 x Screws
4 x Nuts
2 x Layer acrylic board
1 x Micro usb cable
1 x Crystal screwdriver
1 x Instruction manual
4. Kuman UPS Lithium Battery Pack Expansion Board Power Supply with Acrylic Case for Raspberry Pi 3 Model B, B+,Pi 2 Model B & Pi 1 Model B+ A+ A
Feature
Support UPS so that the battery pack can supply power even when the adapter is removed.With 2 battery parallel sockets, it is easy to expand the 3.7V lithium battery capacity.
With battery indicator design, a clear understanding of battery power at 25%,50%,75%,100% status.
With battery capacity detection connector,the system can detect battery capacity conveniently.
The Raspberry Pi fan interface does not occupy RPIO interface of the RPi; it can also be used as the RPi GPIO 5V power supply interface through the DuPont line(no micro USB cable required).
Description
Features:Support UPS function, output DC5V while charging(will not be interrupted).
With battery detection interface, always check the battery's power.
The power-on state can automatically detect the load and start the output function, and automatically turn off the output when there is no load.
The size and mounting holes are exactly the same as the Raspberry Pi for easier installation and use.
It's convenient to power on / off raspberry pi via battery switch;
It can last about 9 hours if only pi 3.
The Lithium battery expansion board can be also used on cellphone.
Battery capacity: 3800mAh
Maximum output current: 2A
Output voltage: 5.1V 0.1V
Standard charging current / voltage: 2A/5.0V
Package included:
1 x Lithium Battery Expansion board (with lithium battery)
3 x heat sink
4 x Gasket
8 x Copper standoff
12 x Screw
12 x Nut
1 x Micro USB cable
1 x Acrylic Case
5. 4 in 1 board 5V UPS for raspberry pi 18650 battery Charging 3.7V step up to DC 5V 9V 12V with Protection (5V Output)
Feature
Funcion 1 :step up board, with 18650 battery case, 3.7v step up to 5v outputFuncion 2,charing board, input 5v 1A or 2A to charge the 18650 battery
Funcion 3: Battery protection, Over-charge protection, over-discharge protection, over-current protection, over-temperature protection, output short circuit protection
funcion 4: UPSUninterrupted power supply):if input 5v, it will charge the battery and no use the battery power to step up ; if power failure, it will automatically use the battery power.
You can use two or more in parallel to get more output power
Description
Note:1 if the load less than 2 Watt, you can input 5V 1A;if the load more than 2 Watt less than 5 Watt, please use 5V 2A for input.
2 if you want a add switch , please add it on SW pin, it can control the output, otherwise, please short SW pin.
3 the Load current should less than 1A , if you want to control greater load, please use two or more board in parallel.
4. the board with short circuit and other protection, if make a mistake and short it, please input 5v to Reactivate it
5the board has Mos components,which easy destroyed by static electricity,so Please use soldering iron with Ground wire and take anti-static measures.
Tip:
1 you can use it as a power bank.
2 you can use it as a charger for lithium battery.
3 as 5V UPS for raspberry pi or other MCU
6. Alchemy Power Inc. - Pi-Zero-UpTime. UPS for Pi or other USB devices in a Pi-Zero size. Works with Pi Zero, Pi-3, Pi-2 etc. with 40 pin header
Feature
UPS for Pi-Zero, Pi-Zero W, Pi-3 family, Pi-2, Asus Tinker and other USB devices. Uses one 14500 Li-Ion battery purchased separately.Provides power to the Pi (via 40 pin header) or via micro-USB power out port. Use included micro-USB to micro-USB cable to power the Pi if headers are not installed or for other USB devices.
Small in size, powerful enough to provide UPS power to Pi Zero, Pi 2, Pi 3, Pi Zero W, Asus Tinker or other peripherals.
Battery power is monitored via an on-board sensor. Status is available via GPIO 26.
Power reset switch reboots Pi after a shutdown. LED jumper can turn off LED's if needed. Recommended with item number 4330202245 for battery.
Description
Alchemy Power Inc. Pi-Zero-UpTime provides UPS power using one Lithium-Ion 14500 battery. Battery is not included. Many battery 14500 battery options are available on Amazon. Use flat-top unprotected battery. Recommend item model 4330202245. Install one Lithium Ion 14500 battery in the PiZ-UpTime and the Pi-Zero continues to operate when power fails or when the power plug is disconnected. The battery is charged when power is available. When power fails, the necessary power is generated from the batteries by PiZ-UpTime to power the PiZ, the peripherals attached to it and provide UPS power to USB Power Out port. The micro-USB port provides 5V. PiZ-UpTime comes with a Raspberry Pi header already soldered on it and a micro-USB to micro-USB cable. You can start using Pi-Zero right away - even without the battery (no UPS then!) When the battery arrives, plug it in and now you have UPS capabilities. Pi-Zero-UpTime is small in size, yet powerful enough to power Pi-Zero, Pi-Zero W, Pi-3, Pi-2 etc. Or any board including Asus Tinker and other boards. Test indicate a run time of around 45 minutes with the 14500 battery. Your time will vary depending on battery size and power used. If the header for a Pi-Zero is not soldered, a micro-USB to micro-USB cable (included) can power the Pi-Zero. PiZ-UpTime can be mounted on Pi-Zero or Pi-3 using spacers. Battery is monitored via GPIO 26. Sample software provided uses GPIO 26 and ensures a proper shutdown when the batteries run low. An on-board sensor measures the battery level and performs a hard shutdown when the battery level is low. A power reset switch on Pi-UpTimeUPS makes it easy to reboot the Raspberry Pi or PiZ after a software shutdown. The LED jumper shunt removed turns off the LED's minimizing the power lost.7. Raspberry Pi UPS
Feature
Supports AA batteries(Alkaline and NIMH) and standard lithium battery packsIntegrated battery charger.
Advanced features for remote operation, including low power sleep mode with various wake up sources.
UPS events logging to /var/log/messages in Linux.
Stackable architecture and configurable I2C address allow the UPS to coexist with other daughter cards/hats
Description
Raspberry Pi UPS(Uninterruptible power supply). Box contents include one Raspberry Pi UPS and mounting hardware. Note : Batteries and Raspberry Pi computer are not included.8. WINGONEER UPS HAT with Battery for Raspberry Pi 3 Model B / 2B / B+ | Battery Adapter | Power Source Pi 3
Feature
Standard dimension of Raspberry Pi HAT, and it's compatible with all of the expansion board.Cascading design saves space while powering raspberry pi and expansion boards without affecting GPIO expansion.
Support up to 2A quick-charge technology, can rapidly charge full the battery.
Can be charged and supplied power to raspberry pi at the same time.
Removable battery, user can choose a more larger capacity lithium battery pack (NOTE: voltage must be 3.7V).
Description
WINGONEER trademark Reg.NO:4747611WINGONEER UPS HAT with Battery for Raspberry Pi 3 Model B / 2B / B+ | Battery Adapter | Power Source Pi 3
Features:
Standard dimension of Raspberry Pi HAT, and it's compatible with all of the expansion board.
Cascading design saves space while powering raspberry pi and expansion boards without affecting GPIO expansion.
Support up to 2A quick-charge technology, can rapidly charge full the battery.
Can be charged and supplied power to raspberry pi at the same time.
With 4 LED power indicator;
Removable battery, user can choose a more larger capacity lithium battery pack (NOTE: voltage must be 3.7V).
With safety protection circuit to prevent overcharge and over discharge.
Retains the raspberry GPIO interface, you still can use all kinds of expansion board;
It is Mini UPS power supply; maximum 5V / 2A output, and maximum 5V / 2A input.
Note:
The USP HAT will provide power to Raspberr Pi via GPIO pin;
DO NOT connect the micro USB to Rasberrry Pi;
Please connect the micro USB to UPS HAT board;
Packing List:
1 x UPS HAT Board ( Not include the Raspberry Pi 3 model B)
1 x 2500mAh 3.7v Lithium Battery(Battery brand may different batch)
9. 1PC UPS HAT Board + 2500mAh Lithium Battery for Raspberry Pi 3 Model B/Pi 2B/B+/A+ Board Module
Feature
Standard dimension of Raspberry Pi HAT, and it s compatible with all of the expansion board.Cascading design saves space while powering raspberry pi and expansion boards without affecting GPIO expansion.
Support up to 2A quickcharge technology, can rapidly charge full the battery.
Description
Dissipation Power:otherModel Number:other
Features:
Standard dimension of Raspberry Pi HAT, and it s compatible with all of the expansion board.
Cascading design saves space while powering raspberry pi and expansion boards without affecting GPIO expansion.
Support up to 2A quickcharge technology, can rapidly charge full the battery.
Can be charged and supplied power to raspberry pi at the same time.
With 4 LED power indicator;
Provides an example code to beginner to demonstrate how to demonstrate battery capacity displays the current battery level in the raspberry pi
Note:
The Raspberry Pi main board is not included.
Package included:
1 x UPS HAT Board
1 x Liion Battery(2500mAh)
Unit Type:piece
Package Weight:0.095kg (0.21lb.)
Package Size:10cm x 8cm x 4cm (3.94in x 3.15in x 1.57in)
10. MakerFocus Raspberry Pi Battery Pack,(Raspberry Pi Battery, USB Battery Pack Raspberry Pi,) Expansion Board Power Supply with Switch for Cellphone and Raspberry Pi 3 Model B B+ and Pi 2B B+
Feature
Battery capacity: 3800mAH Maximum, Maximum output current: 1.5AOutput voltage: 5.1V 0.1V,Double USB output
Standard charging current / voltage: 1.0A/5.0V
It can last about 9 hours if only pi 3.
The Lithium battery expansion board can be also used on cellphone.
Description
Lithium Battery Expansion Board for Cellphone Raspberry Pi 3 Model B Pi 2B B+Feature:
Battery capacity: 3800mAH Maximum
Maximum output current: 1.5A
Output voltage: 5.1V 0.1V
Double USB output
Standard charging current / voltage: 1.0A/5.0V
It can last about 9 hours if only pi 3.
The Lithium battery expansion board can be also used on cellphone.
Description:
The working PMU (Power Manage Unit)can be only worked for charging mode or step-up mode at the same time.
If the USB-A interface without any external load (like Pi), with 5V input voltage of MicroUSB, then the PMU enter charging mode. The PMU will integrate a current-limiting resistor with the external voltage, 5V voltage for Lithium battery, around 4.6V-4.7V voltage for USB-A interface.(The "ON" LED lights )
The PMU would enter step-up mode without external 5V voltage. Under this circumstance, turn on the switch, USB-A interface can output maxmum 5V voltage, two USB-A interface can maxmum output 1.5A current. The PMU itself has current-limiting protection. it will be short circuit when over 1.9A current.
Note:
You can charging this battery even if the switch is turn off.
Raspberry Pi main board is not included!!!
Package Including
1 * V1.0 Lithium Battery Expansion Board
1 * 3800mAH Lithium Battery
Recent Comments