Top 10 best lamp light socket kit 2024
Finding the best lamp light socket kit suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best lamp light socket kit
1. Fadimikoo E26/E27 Lamp Socket Vintage Edison Hanging Textile Pendant Light 14.7FT Cord Kit with In-Line On/Off Switch UL listed,3 Pack
Feature
High quality cord, support Max 100W light bulbFits bulbs with standard E26/E27 medium size bases
These lamp holders are ideal for bare bulb features with E27 Edison Screw Bulbs
Safety locking screw in base for secure fitting
14.7 Feet of Premium Quality Textile Braided (Cloth Covered) Wire, inspired by vintage electrical cord
Description
Features and Specifications Type:E26/E27 Length:4.5m Foot Cord Input:AC110-220V Switch:On/Off Switch Acceptable wattage:100W Max2. DEWENWILS Remote Control Light Lamp Socket E26 E27 Bulb Base Adapter, No Wiring, Wall Mounted Wireless Controlled Ceiling Light Switch Fixture, Expandable, ETL Listed, White
Feature
Remote Light Switch Kit Remotely turn on/off ceiling lights, plug-in pendant, standing floor lamps, table top lamps, bedside and hard-to-reach lights with a push of a wall switchDetachable Wall Mounted Switch No in-wall wiring needed; mounting bracket provided; simple installation; white wall mountable switch fits any room dcor easily; detachable remote provides more flexibility
80 FT Long Range Strong RF signal works through walls and doors without any interference; remote control lamps for bedroom, living room, basement and do not need to be in the line of sight
Programmable and Expandable Available to add extra handheld remotes, outlets and light sockets (Same Model Only); transmitter and receiver have been pre-programmed for immediate use
Led CFL Incandescent Bulb Compatible LED/CFL 20W; Incandescent bulb 60W; standard medium E26/E27 base; high temperature and electricity resistance PBT material; ETL certified and FCC approved; 1-year warranty
Description
Dewenwils Wireless Wall Switch Remote Control E26 E27 Light Lamp Bulb Socket, No Wiring NeededSpecifications:
- Input Voltage: 120VAC 60HZ
- Max.load Power: LED/CFL 20W; Incandescent Bulb 60W
- Transmission Frequency: 433.92MHz
- Remote Control Distance: 80 Feet (Free Area)
- Transmitter Battery: 12V (23A) Alkaline Battery (Included)
- Socket Type: Standard Medium E26/E27
Wall Mounted Switch without in-Wall Wires
Simplify your life by remotely controlling lighting fixtures with a wall mountable remote controller.
Each light bulb socket has a manual switch and can also be turned on/off manually.
No wiring required; no pre-programming required; easy to install and convenient for home/office use;
Do not need to be in the line of sight for remote to work by individual ON/OFF button.
80ft Remote Control Range
Strong radio frequency transmission can work through walls and doors to control lamp as far as 80' in the open area.
The wireless range may be shortened by other electronic devices, appliances, walls, or other physical barriers, so in actual use, the distance may be slightly less than 80 feet.
Customize Your RF Remote System
Allow you to add extra handheld remotes, outlets and light sockets (Same model from Dewenwils only; contact us for more details).
Provide more flexibility to expand your remote system freely.
Smaller Size
The socket adds approximately 2.28" in height or length.
Please measure the size carefully before you buy if you want to use it under lampshade or in tight space.
Get Rid of Troublesome and Unstable WIFI Control Switches / Light Bulbs
No complicated setting up needed and do not need to worry about the strength of WIFI signal.
Packing List:
- 1 x Wall Switch Remote Controller
- 1 x Lamp Socket
- 1x Battery (Installed)
Note:
Not for use in totally-enclosed luminaires or humid environments.
3. Simple Deluxe 15 Feet Extension Hanging Lantern Pendant Light Lamp Cord Cable E26/E27 Socket On/Off Switch, UL Listed, 2 Pack
Feature
SAFETY ASSURANCE: Constructed of fire-resistant materials, 18/2 SPT-2 221F/105C, UL listed for safetyEASY ACCESS FOR ON/OFF SWITCH : You can turn on and off easily just simply slide the gear switch on the cable.
CONVENIENT USAGE: Lightweight and easy to install the bulb without any tools. 4 ceiling hooks and 4 cord hooks for hanging are included.
EXTENSION CABLE: 15 feet long satisfies for most hanging light applications; Fits standard E26/E27 Socket and On/Off toggle switch; Max Wattage: 360W, 120V-250V.
MULTIFUNCTION: Can be used to brighten up any room, such as kitchen, bedroom, bathroom and basement. Perfect for any outdoor decoration, like weddings, parties and yard barbecue.
Description
This is what you are looking for. This cord can be used in every environment.
Whenever you are looking hang the light, our 15 feet long single bulb cord is the perfect solution. They could be hung straight down from the ceiling, dangling from artwork or draped on any pole. It is perfect for every surroundings! They can be easily installed in your room. No need for any tools or professional skills. What you need to do is just insert a bulb and plug it in, and then your room will be brightened up.
ON/OFF SWITCH: Allows you to control it conveniently.
UL LISTED and CE CERTIFICATED: You can find the mark on the back of the button switch. With these certificated, you can go ahead with more confidence using the product.
LONG BULB CORD: It has 4.52m / 15 feet long hanging light cord with E26/E27 socketcan be freely adjusted according to the length you need.
FITS E26/E27 STANDARD MEDIUM BASE BULBS: This E27/E26 standard medium base light bulb socket to 2-prong US AC power cord allows you to install a light bulb anywhere an electrical power outlet is located.
SPECIFICATIONS:
Type: E26/E27
Length: 4.52m / 15 feet Cord
Input: 120-250V AC
Switch: On/Off Switch
Package Includes:2-pack Extension Hanging Lantern Cord Cable, 4 ceiling hooks and 4 cord hooks
ATTENTION:
Acceptable Wattage: 360W Max
4. Lamp Light Kit - Make, Repurpose or Repair an Old Lamp with a DIY Lamp Kit - Antique Brass Socket - 12 Foot Long Brown Cord - Lamp Rewiring Kits Allow You to Build Your Own Lamp
Feature
BEGINNER FRIENDLY LAMP WIRING KIT - Repair a vintage lamp with safe and new electrical components, or make new custom lighting from scratch with this user friendly DIY Kit. No previous knowledge of how to make a lamp is necessary.ALL ESSENTIAL HARDWARE INCLUDED - It has everything you need to begin building your own lamp, plus illustrated instructions to help guide you along the way. Don't worry about missing a vital piece for your project - it's all included here.
COMPLETELY CUSTOMIZABLE - Why settle for a lamp that doesn't perfectly match your style and decor? Make your own custom lamp to suit your unique taste and preferences.
UL-LISTED : Electrical components are polarized and UL-listed, meaning you can rewire or repurpose old vintage or thrift store lamps to make them safer than they were before.
DIFFERENT COLOR OPTIONS - Choose from three different socket colors including Antique Brass, Glossy Brass and Nickel Silver. Cord color options include: Gold, Silver, Black and Brown. MADE IN USA
Description
Color and Size: Antique Brass Finish Socket with 12 Ft Brown Cord - 1-packLove a good lamp?
You'll fall head over heals for our super easy Lamp Making Kit. Inside, you'll find everything you need to turn almost any ordinary everyday object into a customised lamp for you or a friend. You can also repair or refurbish a table lamp with this easy-to-use electrical wiring kit.
Available in 3 hardware finishes and lamp cords to suit your individual decor preferences.
What are the benefits of making your own lamp?
Beautiful designer lamps can cost you hundreds of dollars. But with this easy DIY wiring kit, you'll be able to make a beautiful, quality lamp for a fraction of the cost. You'll also be able to perfectly match your lamp to your specific style and preferences. Don't settle for a mass-made generic lamp. Instead, update a unique vintage lamp or even make your own from scratch.
What's included in this kit?
- UL-Listed socket with an on/off switch
- Standard household SPT-1 cord
- 2 washers - 1 flat and 1 rubber (Both 1 inch)
- 2 knurl nuts
- 1 harp saddle base
- Threaded steel pipe (2 inches long)
- Black bushing for the cord exit hole
- 2 locknuts
- 4 lockwashers
- 1 finial, suited to standard lamp harps
2 different cord lengths for your lamp making kit
Our 8 foot long cord is ideal for table lamps. Our 12 foot long cord is ideal for floor lamps, but it depends on your specific needs.
The lamp wire in this kit is standard SPT-1 cord which has a flat shape. The widest part of the cord is approx 1/4" and the shorter part of the cord is approx 1/8".
Make a lamp you love today!
5. LoraTap Wireless Remote Control E26 Light Bulb Socket Lamp Switch Kit 656ft 915MHz Range Remote Control LED Light Fixtures 30W Max. (Light Switch + LED Lamp Holder)
Feature
Long Range & Magnetic Base: Wireless lighting control range up to 100 feet /30m, you nearly can control your light anywhere in your house. The remote control is with magnetic base, mountable and moveable, relocate light switch without damaging the walls.Works with All The E26 Bulbs: Like LED Bulb, Smart Bulb, Incandescent Bulb, Tungsten Bulb, Halogen Bulb, CFL Bulb, Fluorescent Bulb, Corn Light Bulb etc. / voltage 100-120VAC, max load 2.5 amp, max power 300W. | Bulb Socket Dimensions(Dia x H): 2.68 x 2.83 in , it adds approximately 1.58 in (4 cm) to fixture height.
Easy Installation & Non-Interference: Just screw the bulb adapter between the lamp holder and the bulb, then you can turn your ordinary bulb into wireless bulb, can use several bulb socket kits in one room and no signal interference.
Convenient for Everyone: Simple, app-free control of your light, even the elderly, children and people with limited mobility can use it directly, it's really comfortable and convenient for your family.
Memory Function: When the bulb socket is powered off and back on it remembers its previous settings.
Description
SpecificationsBulb Socket
Color: white
Voltage:100-120VAC, 50/60Hz
Max. Load: 2.5Amp
Max. Power: 300W
Screw Base Type: E26
Compatibility: E26 LED, CFL, incandescent and halogen bulbs etc
LED indicator light color: warm white
Bulb Socket Dimensions(Dia x H): 2.68 in x 2.83 in, it adds approximately 1.58 in to fixture height.
Transmitter(Switch)
Color: white
Buttons: 2 Buttons, ON/OFF
Signal Range:up to 100 ft/ 30m, depending on local circumstances
Frequency: 915Mhz
Lifetime: over 220 thousand clicks
Battery Type:Panasonic CR2032(included)
Battery Lifetime: up to 10 years
Switch Dimensions(Dia x H): 2.68 in x 0.63 in
Package includes
1 x Bulb socket
1 x Switch(Remote Control)
1 x Magnetic Switch Base
1 x Panasonic CR2032 Battery(for remote)
1 x Double-Sided Tape
1 x User Guide
6. vTopTek Pendant Light Kit,Vintage Edison Socket Screw Bulbs Light Lamp Holder, E26/E27 Base Adjustable Wire for Kitchens, Dining Rooms, Bars and Restaurants Pack of 6 (Black)
Feature
Voltage:110V-220V, Watts:0-250WItem of Length:1m/3.28Ft.Material: Aluminum + Iron.Well package.
6 Pack vintage Edison light socket pendant light fixture accepts standard light bulb.
Fits bulbs with standard E26/E27 medium size bases, bulbs are not included.maximum watt:250W
Attached with hanging screws kit, Make you install more easier. Light weight and easy for anyone to use. It's simple to install the bulb and put the plug-in the socket. Perfect to light up basement, closet, studio and much more.
Description
Lamp Installation Instructions :When installing the lamp, do not tilt the lamp and the lamp cap and rotate it in a clockwise direction.
Dont to much force, this may cause damage to the lamp cap and bulb. When removing the lamp, turn it counterclockwise.
Specifications:
Light source type: incandescent, Edison light bulb
Material: Aluminum + Iron
Voltage: 110V
Wattage: 0-60W
Light: Edison Bulb
Item of Length: 1M
Base: E26 / E27
Color: Black
Package included:
6 X E26 / E27 Vintage Triple Light Sockets Pendant
6 X Hanging screws Kit
7. Dewenwils Remote Control Light Lamp Socket E26/E27 Bulb Base, Wireless Light Switch Kit, White (Learning Code, 4 Sockets 2 Remotes)
Feature
SIMPLE, FAST, CONVENIENT: An easy way to turn your lights on & off from anywhere in the house whenever you want. Each light bulb socket has a manual switch besides the wireless remote controller80FT LONG RANGE: Strong RF signal works through walls and doors without any interference; Do not need to be in line of sight for remote to work
EXPANDABLE: The sockets and transmitters have been pre-programmed for immediate use. It also has a self-learning function which allow you to expand your system with other Dewenwils remote control lamp socket sets
ENERGY SAVING: Lamp sockets remain 'OFF' after a power cut; Turn off the lights conveniently by just pushing a button to save energy
SAFE & STEADY PERFORMANCE: Dewenwils wireless light socket obtained ETL and FCC certificates; Made of high temperature and electricity resistance PBT material; Comes with 1 year warranty
Description
Dewenwils Wireless Light Remote Control Bulb SocketRemotely turn on lights in darkness or turn off without getting out of chair or warm bed in winter;
Do not need to be in line of sight for remote to work with individual ON/OFF button;
Go green and save on your electrical bill;
No pre-programming required;
Easy to install and convenient for home / office use;
Simplify your life with this great lighting fixtures.
Learning Function & Individual ON/OFF Buttons
All sockets have been pre-programmed for immediate use.
You can control the socket individually or control all sockets at a time.
You can also change the pre-set configuration to meet your needs.
The All ON/ALL OFF buttons will automatically control sockets which has been paired with 1-4 sets of buttons and no need to be re-programmed.
Each cap has a small button for re-programming or manual switch.
80ft Remote Control Range
Strong radio frequency transmission can work through walls and doors to control lamp as far as 80ft in open area.
The wireless range may be shortened by other electronic devices, appliances, walls, or other physical barriers, so in actual use, the distance maybe slightly lesser than 80ft.
Smaller Size
The socket adds approximately 2.36" in height or length.
Please measure the size carefully before you buy if you want to use it under lampshade or in tight space.
Specifications:
- Input Voltage: 120VAC 60HZ
- Max.load Power: Incandescent Bulb 60W; CFL/LED 20W
- Transmission Frequency: 433.92MHz
- Remote Control Distance: 80 Feet (Free Area)
- Transmitter Battery: 12V (23A) Alkaline Battery (Included)
- Socket Type: Standard Medium E26/E27
Packing List:
- 2 x Remote Controllers
- 4 x Lamp Sockets
- 1 x User Manual
Note:
For customers who ordered multiple units, please feel free to contact us if you have problem with re-programming.
8. Supmart Vintage Pendant Light Kit Cord with Dimming Switch and Triple E26/E27 Industrial Light Socket Lamp Holder 25FT Twisted Black Cloth Bulb Cord Plug in Hanging Light Fixture
Feature
Build a lighting over your island without having to make a hole in the ceiling. You can easily create your own unique light fixture by hanging triple light sockets with cord. It is perfect for your DIY pendant lamp ideaWith its 25FT(7.62M in total) braided cloth lamp cord and in-line on/off Dimmer switch(structure diagram in the third picture), this pendant lighting fixture is decorative and dimmable, allowing you to customize lighting ambiance and levels
Each edison lamp holders has its own on/off switch. A two pin plug with US standard is hard wired. Includes all mounting hardware for quick and easy installation. Just hang the pendant cord from the ceiling and add a bulb, it is plug and play
This multi socket light cord could be used to brighten up any room, such as kitchen, dining room, living room, basement and hallway. Great for any outdoor decoration, like weddings, parties and celebrations as well
No bulb included. Fits bulbs with standard E26 medium size bases, max 60W per socket. Incandescent light bulb is highly recommended, since some kinds of LED bulbs maybe incompatible with the dimmer
Description
Product OverviewThis hanging light cords are composed of three copper-colored vintage lamp sockets, 25-foot twisted bulb cord and UL-listed dimmable switch. With its US standard plug, it is easy to create a plug in hanging lamp without drilling a hole and hiring an expensive electrician.
Industrial and retro flavor
You would be attracted by the 19th century look of it at first sight. It is designed to have retro stylings, such as the twisted lamp cord, the lamp socket with on/off Turn Knob. Once you toggle it, the switch turns with a definite click, just like what people do in passing days.
Use Anywhere
It is convenient to create customized task lighting for the kitchen, laundry room or utility room. But beyond that, it can be used as a standby lamp when there is something wrong with the common lamp. The plug-in pendant light cord is ideal for temporary lamp, home standby lamp, dormitory light etc.
Important Information
Max 60W per socket. Once it is over 200W in total, it will cause damage to the dimmer.
This item is not water rated. It is intended for dry place use only
We recommend a maximum weight of 5 pounds per socket
Note: Incandescent bulb is highly recommended, since some kinds of LED bulbs maybe incompatible with the dimmer.
Warranty
100% MONEY BACK GUARANTEE: if for any reason it's not right for you, let us know and we'll give you 100% of your money back. They also come with a lifetime warranty against material and workmanship defects.
9. Swpeet 4 Pcs Vintage Edison Light Socket Screw Bulbs Light Lamp Holder With Wire, E26 / E27 Base Adjustable Black Wire for Kitchens, Dining Rooms, Bars and Restaurants
Feature
HANGING SCREWS KIT TO SIMPLE USE --- Attached with hanging screws kit, Make you install more easier. Light weight and easy for anyone to use. It's simple to install the bulb and put the plug-in the socket. Perfect to light up basement, closet, studio and much more.PRODUCTS INFORMATION --- Total length 3.28Ft.(1m) of Premium Quality Wire, inspired by vintage electrical cord. Fits bulbs with standard E26 / E27 medium size bases. No hard wire installation required.
WIDE APPLICATION --- Any place where need to be brightened up. Vintage pendant light is ideal for use in kitchens, bedrooms, dining rooms, bars, and restaurants.
WHAT YOU GET --- 4 Pack Industiral Edison Vintage Style One-light Socket Mini Pendant Light Fixture AND 4Pcs Hanging Screws Kit ; Length: 3.28Ft.(1m); Material: Aluminum + Iron. The issue of lighting problems will be solved; And buying from Swpeet, get 100% satisfaction guarantee.
UNIQUE VINTAGE DESIGN --- This vintage style socket pendant is perfect in traditional and transitional homes, bringing a turn-of-the-century look to any area. It's the ideal for vintage solution for hanging attractive antique bulbs, home decoration, restaurant spaces, dinner parties, backyard patios, or other social events. To prevent extrusion, We separate product parts , you need to install by yourself, The installation is simple. If you have any questions, please feel free to contact us.
Description
Lamp Installation Instructions :When installing the lamp, do not tilt the lamp and the lamp cap and rotate it in a clockwise direction.
Dont to much force, this may cause damage to the lamp cap and bulb. When removing the lamp, turn it counterclockwise.
Specifications:
Light source type: incandescent, Edison light bulb
Material: Aluminum + Iron
Voltage: 110 - 220V
Wattage: 0-250W
Light: Edison Bulb
Item of Length: 1M
Base: E26 / E27
Color: Black
Package included:
4 X E26 / E27 Vintage Triple Light Sockets Pendant
4 X Hanging screws Kit
10. (2 pack) 3 way socket replacement for lamp, Medium Base Interior Only, Incandescent Lamp holder, Removable Turn Knob, 2-Circuit.
Feature
SAVE TIME AND MONEY: Tired of replacing entire lamps or over paying for a quick socket replacement, this easy to install socket is what your'e looking for!Wattage Rating: 250W 3 way turn sequence LO-MED-HI-OFF, Compatible with three-way light bulbs, or one-way Light bulbs. Can convert previous 1 way lamp to 3 way socket, just switch bulbs to 3 way after install.
Medium base (E26) interior only, shell Incandescent lamp holder, removable turn knob, 2-circuit, for 3-way 2-filament lamps
Industry standard socket- This style socket is used everyday for lamp repair by your local business, they are reliable and top quality.
30 day Guarantee- Not the right socket for you? Trouble installing? No problem our hassle free money back guarantee ensures you won't regret this purchase!
Description
Have you found yourself replacing lamps or over paying for a simple socket change?
Do you want to save time and money?
Then you've come to the right place!
ESC inc. has been in the repair industry for over 30 years!
We'll guide you through this simple process so that you never have to replace your lamps or over pay for a socket change again!
Easy 5 step process to install
1. On the right side of socket housing by the switch (Press) into housing to release outer shell, in some cases you will need to press back of housing as well. (Use a flat head screw driver)
2. Remove inner socket from housing DO NOT remove cardboard insulation.
3. With a flat head or Philips screw driver unscrew both bottom screws with the copper wire wrapped around them.
4. Keep copper wire tightly wrapped together and wrap them around replacement ESC socket bottom screws and tighten them down. There is no difference between screws don't worry about interchanging wires on them.
5. Press inner socket firmly into place in the earlier removed housing, screws with wire must be pressed all the way inside and should not be showing, then push housing and socket back into place on the original base that it was earlier removed from.
-Don't forget to brag to your friends or significant other-
Now Get Yours Before We Run Out Of Stock!
Just Click "Add To Cart"
Recent Comments