The 10 best reptile thermostat humidity 2024
Finding the best reptile thermostat humidity suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best reptile thermostat humidity
1. Inkbird ITC-306T Pre-wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
Feature
Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1100W.Dual time cycle setting during 24 hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
Maximum output load: 1100W(110V). Temperature calibration; Over-temperature and sensor fault alarm
Dual display window, be able to display measured temperature and set temperature at the same time;
Plug and play design, easy to use; Support reading with Centigrade or Fahrenheit unit
Description
ITC-306T is a pre-wired heating output temperature controller(No Cooling Controller) with time function specifically for breeding and planting. It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants. ITC-306T can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it's suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Features:
Temperature Control Range: -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F
Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-58 ~ 160 F)
Input Power : 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Dimension: Body:140x68x33mm (5.5x2.7x1.3 inch.)
Socket:85x42x24mm (3.3x1.7x1 inch.)
Ambient Temperature : -30~ 75 C / -22~ 167 F
Storage: Temperature -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Inlcuded:
1 x ITC-306T Controller
1 x Manual
2. Inkbird ITC-608T Temperature & Humidity Controller 1800w, ETL Listed,Pre-Wired AC Dual Stage Outlet Thermostat, w/Temperature + Humidity Sensor Mushroom Greenhouse Reptile
Feature
1.US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)2.More power up to 1800W. Temperature control range is -40-212F(-40-100), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
3.Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
4.Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
5.Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Description
Notes:Please pay more attention when choosing the sensor.Customer have to purchase temp and humidity sensor if you want controlling both temp and humidity. Customer have to purchase temp sensor if you want using temp control function. Customer have to purchase humidity sensor if you want using humidity control function.
Description:
Temp and humidity controller ITC-608T has certificate of ETL (US and Canada approved). The product will be safer when using. ITC-608T has multifunctional control mode. It can control both temp and humidity at the same time. (Plug both temp and humidity sensor). Or control single temp and has 12 different time stage periods for temp control mode. Or only control humidity with plug humidity sensor. This unit supports both F and C degree, compress delay, calibration and reset setting values saving. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temp controller from violent change. Same as humidity control.
Specification:
Maximum output load120Vac, 60Hz, 15A, 1800W
Temp measurement range-40~100/-40~212
Temp display accuracy0.1/(<100/)
Relative humidity measurement range5~99%RH
Humidity display accuracy0.1%RH
Display unittemp:C orFhumidity%RH
Ambient temp-20~60/-4~140
Storage environmenttemp0~60/32~140humidity20~80%RH(Unfrozen or condensation state )
Temp/Humidity sensor cable Length: 2m(78.74in)
Input Power Cable Length: 1.5m59.05in
Unit Dimension: 20.8cm*8.5cm*3.5cm8.19*3.35*1.38in
Warranty: 2 year
Supporting Temp and humidity calibration
Compressor delay protection for refrigeration control
High and low temp/humidity alarms are available
Over-temp/humidity and sensor fault alarm
Package Content:
1x ITC-608T temp and humidity controller
1x Temp sensor
1x Humidity sensor
1x Manual
3. Reptile Thermostat Controller - Reptiles Heating Pad Thermostat Seed Germination Heat Mat Brewing Temperature Control, 68-108 F
Feature
SIMPLY HEATING SET UP - Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display available in Fahrenheit and Celsius.EASE OF READING - Handy LED WORK and POWER indicator lights allow you to check the controller's status at night. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
RUGGED CONSTRUCTION - The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
VARIETY OF USES - Our thermostat controller can be used for reptile heating pad, seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range
TEMPERATURE RANGE - Temperature control range is 40-108F, temperature display range is 32 -140F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Description
The digital temperature control device that allows gardeners to select and maintain optimum rooting temperatures for faster seeding or cutting growth. It is compatible with many other heat mats.SET UP THE THERMOSTAT
1.Insert the probe approximately 1" - 1 1/2" into the rooting area.
2.Position the thermostat up and away from seedling trays and stray water. DO NOT SUBMERGE THE THERMOSTAT
3.Plug the heat mat into the thermostat
4.Plug the thermosta's power cord into the power source/ electrical outlet.
5.Set the maximum desired temperature for the heat mat.
USING THE CONTROLLER
1.Press the SET button to display the current pre-set temperature. The thermostat's LED screen shows the current temperature whenever the SET button is not activated.
2.Press and hold the SET button for three second to enter temperature selection mode. Press the UP or DOWN button to adjust the temperature. The thermostat's LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature. The HEATING light cycles on when the mat is in the process of heating. When the LED is not lit, the mat is not providing heat. The light turns off automatically when the mat reaches the preset temperature.
3.Press the DOWN button to display the temperature in Celsius. Press the UP button to display the temperature in Fahrenheit.
TIPS
The digital heat mat is designed to achieve the desired heat temperature within 5 hours. If it take longer than 5 hours, or if the mat runs longer than 5 hours, desired temperatures are not being reached. To convserve power and increase the mat's effectiveness, move the mat to a more insulated surface. You can also add a humidity dome to cover the seedling tray, which aides in heat retention.
4. Inkbird C909 1500W Digital Heat or Cool Temperature Controller, Humidity Cooking Controller, Timer for Brewing, Heat Mat, Reptile, and so on (Thermostat with temperature and Cooking Sensor)
Feature
Our innovative model features 4 different control modes for your ultimate convenience! Now you can have a temperature, humidity, time and cooking control at once, thanks to this top-notch temperature indicator! Different probes can be accessed- our controller will automatically identify each sensor type and will carry on with the correspondent control!Easy to set up and play! Press "Set" button and set your desired high and low temperature or humidity or time in one window.
Programmable temperature correction offset function (Calibration) is included. A temperature range error audible alarm is included
A programmable cooling or dehumidify output delay function for protection of the refrigerant or dehumidifier compressor is provided
One Year Warranty.
Description
Features:it features a large power output (1,500W),which makes it suitable for most applications,
4 different function modes can be operated( Please note that this package not included Humidity Sensor),
a wide temperature (-58~212F) and humidity range (0%~100%RH)is offered,
you can choose between C/ F display
Package included:
1x C909 Temperature controller
1x 6.56ft NTC Temperature Sensor
1x 6.56ft Cooking Sensor
1x Manual
5. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 6.65ft DC Cord NTC Stainless Probe Sensor for Aquarium, Incubator ect
Feature
F/C degree display; Easy to setup.The sensor can easily be replaced.
Maximum output load: 1100W (120V).
Alarm when over-temperature and sensor error.
Dual display window, be able to display measured temperature and set temperature at the same time.
Description
Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
1x Manual
6. DIGITEN Digital Humidity Controller Humidistat Pre-Wired Plug Simple-Stage AC 110V -240V with High Accuracy Humidity Sensor for Dehumidifier Humidifier Reptiles Greenhouse Exhaust Fan Fermentation
Feature
Large LCD screen. Display the sensed humidity, setting humidity, and custom icons on the display indicate working mode.Easy to use and program, Dehumidify Mode & Humidify Mode. Only 2-steps setting for your application, switch different modes between humidification and dehumidification automatically, plug-n-play design.
Reliable and highly accurate humidify sensor. It is plug and play transducers designed for OEM applications where reliable and accurate measurements are needed.
With a humidity correction function. Allow user to adjust measuring accuracy base to on different probe, etc.
High and low humidity alarms are available, over-humidity and sensor error alarm. Widely used for koji fermentation, grow tent, exhaust fan, humidifier control, refrigerator, dehumidify control, meat curing room, bathroom, mushroom, mini greenhouse, crawl space, ventilator fan, etc.
Description
The humidistat is simple-stage, electronic humidity controller. It will turn off the device when desired humidity is reached. The large, lighted LCD screen display is easy to read. It is easy to program. Plug and play designed. The case is designed with fireproof ABS material for human engineering. Humidity sensor is reliable, stable and high-accuracy.Specifications:
Control Range: 5-99%RH
Humidity Resolution: 0.1%RH
Accuracy: 3%RH
Control Mode: Humidify or Dehumidify
Input Power: 100-240Vac, 50/60Hz
Humidity Control Output: Max.10A, 100-240VAC
Humidity output load: 1100W@110V, 2200W@220v;
Buzzer Alarm: High and Low Humidity Alarm
Sensor model: MEAS HTG3500 series
Sensor Lead Length: 2m, 6ft
Relay Contact Capacity: Humidity (10A, 100-240VAC), Dehumidify (10A, 100-240VAC)
Input Power Cable Length: 150cm/6ft
Output Power Cable Length: 18cm/7inch
How to work:
1. Dehumidify Mode:
Set RUN humiditySTOP humidity, the humidistat enter dehumidification mode. The LCD will display MODE: DEHUMIDIFICATION, when measuring humidity is higher than RV, the dehumidification equipment start working. When measuring humidity reach to STOP humidity, the dehumidification equipment stop working.
2, Humidify Mode:
Set RUN humiditySTOP humidity, the humidistat enter dehumidification mode. The LCD will display MODE: HUMIDIFICATION, when measuring humidity is lower than RUN humidity, the humidification equipment start working. When measuring humidity reach to STOP humidity, the humidification equipment stop working.
Package includes:
1 x DHC-101 Humidity Controller
1 x Humidity Sensor
1 x User Manual
7. BALDR digital Thermo-Hygrometer Square Thermometer monitor temperature gauge Humidity with Standing wall Hanging magnet White
Feature
Easy-to-Read Display : This humidity gauge thermometer has bright and white panel with a clear LCD display, which is easy to read even from a far distanceHigh Accuracy& Authentic of temperature monitoring: Temperature range: -10C~50C14F ~122F, fast response measuring every 30 seconds to provide more accurate readings.
Indoor Humidity Monitoring :Relative humidity range: 20%RH~95%RH,which is perfect used in green house ,baby room or guitar room
Arrow trends for temperature and humidity: The arrow will change direction to show the temperature & humidity trend.
Versatile & Perfect device: This small hygro-thermometer can be Table standing ,wall hanging or magnet attaching , according to your convenience
Description
DescriptionBaldr digital square Thermo-Hygrometer is small and cute for each room. The size is about 87x85x14mm. It can be wall hanging by the hole on the back or free standing by plastic bracket or magnet attaching to a proper surface by the magnet on the back .Data is big enough for reading the temperature and relative humidity as well as the max/min data within 24 hours . It also has a arrow trend indicator right beside the humidity & temperature. The temperature can be displayed in Fahrenheit or Celsius by pressing the button on front. It is powered by 1xAAA battery which is not included. A small and ideal gadget for your home or office.
Features:
1. Temperature display in Celsius or Fahrenheit.
2. Temperature range: -10C~50C14F ~122F
3. Relative humidity range: 20%RH~95%RH .
4. Detection interval:30 seconds.
5.Max /Min temperature & humidity records within 24 hours.
6. Arrow trends for temperature and humidity
7.Table standing, wall hanging or magnet attaching.
8 Powered by 1xAAA battery (not included).
Specification:
Item Size: 3.42"Lx3.35"Wx0.55"H(87x85x14mm)
Net weight: 75g Package weight: 95g
Color: White
Package contains:
1x B0335TH digital Hygro-thermometer, 1x Instruction Manual
Precautions: Do not clean any part of the product with benzene, thinner or other solvent chemicals. When necessary, clean with a soft cloth.
Warranty: BALDR provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
8. Inkbird Humidistat Digital Humidity Controller ITC-608T 120V 15A 1800W Pre-wired AC Dual Stage Outlet 12 Period Time Stage Humidifier Dehumidifier
Feature
Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.More power up to 1800W. Temperature control range is -40-212F(-40-100), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
Description
Main features:*Plug and play design, easy to use, can control temperature and humidity at the same time
* Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
*Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time period
Specification:
Maximum output load120Vac, 60Hz, 15A, 1800W
Temperature measurement range-40~100/-40~212
Temperature display accuracy0.1/(<100/)
Relative humidity measurement range5~99%RH
Humidity display accuracy0.1%RH
Display unittemperatureCelsius C or Fahrenheit Fhumidity%RH
Ambient temperature-20~60/-4~140
Storage environmenttemperature0~60/32~140humidity20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m78.74in
Humidity sensor cable Length: 2m78.74in
Input Power Cable Length: 1.5m59.05in
Unit Dimension: 20.8cm*8.5cm*3.5cm8.19*3.35*1.38in
Warranty: 2 year
Package Content:
1x ITC-608T temperature and humidity controller;
1x humidity sensor
1x Manual
9. Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage, 1800w, ETL Listed Homebrew Reptile Breed (with Temperature Sensor)
Feature
1.US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)2.Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
3.Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
4.More power up to 1800W. Temperature control range is -40-212F(-40-100), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
5.Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Description
Notes:Please pay more attention when choosing the sensor.Sensor is included, and customer have to choose temp and humidity version if you want controlling both temp and humidity. Customer have to choose temp version if you want using temp control function. Customer have to choose humidity version if you want using humidity control function.
Description:
Temp and humidity controller ITC-608T has certificate of ETL (US and Canada approved). The product will be safer when using. ITC-608T has multifunctional control mode. It can control both temp and humidity at the same time. (Plug both temp and humidity sensor). Or control single temp and has 12 different time stage periods for temp control mode. Or only control humidity with plug humidity sensor. This unit supports both F and C degree, compress delay, calibration and reset setting values saving. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temp controller from violent change. Same as humidity control.
Specification:
Maximum output load120Vac, 60Hz, 15A, 1800W
Temp measurement range-40~100/-40~212
Temp display accuracy0.1/(<100/)
Relative humidity measurement range5~99%RH
Humidity display accuracy0.1%RH
Display unittemp:C orFhumidity%RH
Ambient temp-20~60/-4~140
Storage environmenttemp0~60/32~140humidity20~80%RH(Unfrozen or condensation state )
Temp/Humidity sensor cable Length: 2m(78.74in)
Input Power Cable Length: 1.5m59.05in
Unit Dimension: 20.8cm*8.5cm*3.5cm8.19*3.35*1.38in
Warranty: 2 year
Supporting Temp and humidity calibration
Compressor delay protection for refrigeration control
High and low temp/humidity alarms are available
Over-temp/humidity and sensor fault alarm
Package Content:
1x ITC-608T temp and humidity controller
1x Temp sensor
1x Manual
10. Emours Digital LCD Aquarium Thermometer and Hygrometer Reptile Terrarium Sensor Temperature
Feature
Large LCD display, reading is intuitive , easy to use;Switch between and F. Precise within 0.1/0.1F temperature .Temperature Range: -50 - 70 ;Dimension: 3.8" x 4.1" / 9.8 x 10.5cm (L x W) ;Powered by one AAA battery (not included) ;With screen protector, prevent the screen being scratched during the transportation process;
With max/min memory, temperature and humidity recording the minimum and maximum values; with clock function, which you can read the time at any time;with probe, which you can measure fish tank water temperature , or indoor/outdoor temperature
Easy to use: With stand and hanging hook on the back, included one suction cup ,you can fixed the probe via the suction cup
With temperature & humidity two sensor, perfect for daily household use, or reptile terrarium
Recent Comments