The 10 best crystal oscillator tester
Finding your suitable crystal oscillator tester is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best crystal oscillator tester including detail information and customer reviews. Let’s find out which is your favorite one.
Best crystal oscillator tester
1. 2 Pack Crystal Oscillator Tester 1Hz-50MHz Frequency Counter Tester Meter Cymometer Measurement Tester Module LED DIY Kit
Feature
Product Type: Crystal Oscillator Frequency CounterFrequency Range: 1Hz-50MHz ; Crystal Test Range: about 4MHz-48MHz(not include 32.768KHZ)
Power supply : USB 5V or DC 5-12V ; Digits Resolution : Five
PCB Size: 80*53*2mm. Net weight : about 39g
Package Include: 2 set Frequency Counter Tester Parts( Attention: the products are in parts , the buyers need to assemble them)
2. Counter - TOOGOO (R) 50 MHz Crystal Oscillator Frequency counter Testers DIY Kit 5 Resolution Digital Red
Feature
Color: Red, Simple Construction , compact design, easy to install and debug.Designed to measure the frequency of oscillation of most crystal oscillators.
Based on PIC microcontroller can measure the frequency of 1 Hz to 50 MHz.
Five digits of precision, for example kHz x.xxxx, MHz or xx.xxx x.xxxx MHz.
General for feeding USB interface can be used for power supply, AC adapter or a battery of 9 V can be used too, it is used.
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.Counter - TOOGOO (R) 50 MHz Crystal Oscillator Frequency counter Testers DIY Kit 5 Resolution Digital Red
Optional mode of power saving: can automatically convert the display if the frequency does not change significantly in 15 seconds
Very small number of components: a PIC16F628, 5, 7-segment LED screens, a 20 MHz crystal and some resistors
Material: PCB;. Frequency range: 1 Hz-50 MHz
Glass Test Range: 4 KHz-48 KHz
Built Item Size: 8 * 5.5 * 0.7 cm / 3.2 * 2.2 * 0.3 inches
List package: 1 * Frequency Counter
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/-1-3 cm.
3. huaban 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Meter Cymometer Measurement Tester Module LED DIY Kits with Housing
Feature
Product Type: Crystal Oscillator Frequency CounterFrequency Range: 1Hz-50MHz
Power supply : USB 5V or DC 5-12V Digits
Resolution : Five
Description
1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Meter Cymometer Measurement Tester Module LED DIY Kits4. Qjoy TS-905 1HZ-50MHZ Crystal Oscillator Tester Frequency Counter DIY Kits With Case
Feature
Frequency range: 1 Hz~50 MHzFive digits resolution.
Easy and intuitive.
Measuring signal amplitude can be up to 30v.
4-40 m passive crystals can measure.
Description
Features:Frequency range: 1 Hz~50 MHz
Five digits resolution.
Easy and intuitive.
Measuring signal amplitude can be up to 30v.
4-40 m passive crystals can measure.
Automatic range switching with different gate times.
Optional addition or subtraction of a frequency offset (programmable).
Very low component count: a PIC 16F628, 5 7-segment LED displays, a 20MHz crystal and a few resistors.
Optional (configurable) power-saving mode which automatically turns.
The display off if the frequency didn't change significantly within 15seconds.
USB 5V or DC5-12V power supply can be used.
Easy to install.
Notice:
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Due to the different monitor and light effect,the actual color maybe a slight different from the picture color.
Please allow 2-3cm differs due to manual measurement .
Included:
1 x Frequency Meter DIY Kits
1 x USB Cable
5. HUABAN 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Meter Cymometer Measurement Tester Module LED DIY Kits with Housing (in Parts)
Feature
Crystal Oscillator Frequency CounterFrequency Range: 1Hz-50MHz
Power supply : USB 5V or DC 5-12V Digits
Resolution : Five
Note: Product is in parts . They need to be assembled .
6. NightFire Crystal Tester Kit
Description
This Crystal Tester (Thru-Hole) Project Kit is very popular and easy to build. It will light up the Green LED whenever a good crystal is tested. It has been tested with crystals from 1MHz to 60MHz. It comes with a 3-pin Terminal to fit your crystal, so that you don't have to solder it in to test it. You get the PCB, Schematics, Electronic component parts, and some crystals to experiment with. It requires a 9 volt battery which is not included. The PCB is 0.062" thick and double-sided with soldermask on both sides. This kit is offered with a "Built & Tested" option for those that do not want to build the kit themselves. Below is a detailed introduction to component identification and kit assembly.7. New Arrival DIY Kits 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Meter Case Durable DIY Led Kit
Feature
The item is good qualitywe will test the product Before shipping.Estimated Delivery Time: 6-24 days(trackable)----- We provide Expedited Shipping service : 2-7 days.(excluding handling time).If the order amount above US $120, we will use Expedited Shipping service for free.
We are a professional distributor of electronic components. We also sell other kinds of products. just search the model number in our store.
We make every effort to provide customers with satisfactory service.any question,please feel free to contact me.
Description
For more related products, please click
Features:
- This document describes the construction of small frequency counter with a cheap PIC microcontroller and a few seven-segment LED digits.
- Frequency range 1 Hz ... 50 MHz
- Five digits resolution (display for example x.xxxx kHz, x.xxxx MHz,
or xx.xxx MHz)
- Measuring signal amplitude can be up to 30 v
- 4-40 m passive crystals can measure
- Automatic range switching with different gate times
- Optional addition or subtraction of a frequency offset (programmable)
- Very low component count: a PIC 16F628, 5 7-segment LED displays, a 20MHz crystal and a few resistors
- Optional (configurable) power-saving mode which automatically turns
- The display off if the frequency didn't change significantly within 15seconds
- USB 5V or DC5-12V power supply can be used
Package Included:
1x DIY Kits
1x USB cable
8. 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Measuring Meter Case Durable DIY Led Kit
Feature
The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automaticallyThe measured crystal oscillator tester signal frequency can reach up to 30V. Five precision resolutions
Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment
The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply
The oscillation frequency of most commonly used crystal oscillations can be measured
Description
Features:The measured signal frequency can reach up to 30V.
The oscillation frequency of most commonly used crystal oscillations can be measured.
Five precision resolutions.
Automatic range conversion, no manual switching.
Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment.
The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automatically.
The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply.
All straight plug elements, small number of components, installation and debugging slips.
Specifications:
Measuring frequency range: 1 hz -50 MHZ.
Color: yellow.
Package included:
1 * Crystal oscillator tester kit.
Package Including
.
9. Qiruy 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Measuring Meter Case Durable DIY Led Kit
Feature
The measured crystal oscillator tester signal frequency can reach up to 30V. Five precision resolutionsThe oscillation frequency of most commonly used crystal oscillations can be measured
Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment
The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automatically
The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply
Description
Features:The measured signal frequency can reach up to 30V.
The oscillation frequency of most commonly used crystal oscillations can be measured.
Five precision resolutions.
Automatic range conversion, no manual switching.
Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment.
The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automatically.
The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply.
All straight plug elements, small number of components, installation and debugging slips.
Specifications:
Measuring frequency range: 1 hz -50 MHZ.
Color: yellow.
Package included:
1 * Crystal oscillator tester kit.
10. Walmeck DIY Frequency Tester Crystal Counter Meter Oscillator Tester with Transparent Case 1Hz~50MHz
Feature
LED display to show the data clearly. The display will be turn off automatically if there is no obvious change within 15s.Measuring Frequency Range: 1Hz~50MHz; Signal Frequency: Max.30V. Includes five precision resolutions and power saving mode.
Can measure the oscillation frequency of most commonly used crystals. Wide Power Supply, can be powered by USB/external power(5~12V)/9V battery.
Automatic range conversion without manual switching.With transparent case, components can be well protected.
Programmable addition and subtraction frequency settings, can measure radio transceiver.
Description
Specifications:Material: FR4 + Acrylic
Measuring Frequency Range: 1Hz~50MHz
Signal Frequency: Max.30V
Power Supply: USB or external power(5~12V) or 9V battery
PCB Board Size: 6.3 * 4.9cm / 2.48 * 1.93in
Finished Product Size: 7.3 * 5.8 * 1.7cm / 2.87 * 2.28 * 0.67in
Product Weight: 67g / 2.36oz
Package Size: Approx. 12.5 * 8 * 2cm / 4.92 * 3.15 * 0.79in
Package Weight: Approx. 97g / 3.42oz
Note:
Please remember to wear anti-static gloves if the node is installed to prevent electric shock.
Package List:
1 * DIY Frequency Tester Kit
1 * USB Cable
1 * User Manual(English)
Recent Comments