The 10 best countersunk tie down
Finding your suitable countersunk tie down is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best countersunk tie down including detail information and customer reviews. Let’s find out which is your favorite one.
Best countersunk tie down
1. MAARYEE 8-Pack D Ring 1/4" Tie-Down Anchor Strong Steel D Rings Galvanized Steel Countersunk Bolting Holes Surface Mount Tie Down Ring for Loads on RV Campers, Trucks, Trailers
Feature
Good quality: Made of stainless and anti-corrosion galvanized steel, can bear 1,666 pounds to 3,498 pounds, keeping your cargoes safeWonderful designThese D-rings fits for its 4" x 3-3/4" square recessed pan perfectly, so it won't protrude from the floor. And the weep holes on the bottom of the pan can keep the water from draining
Fixed FunctionThe D-ring can fix logistic straps, bungee cords, ropes, soft loops and chains easily, and make your adventure and cargoes safely
Easy to use:1. Choose a versatile tie-down spot,such as corners of truck 2. Set a mounting plate down to install and cross the mounting hole centers 3. With a hole saw and chisel, use the center spot to cut a 3" x 3-1/8" hole that advances from 9/16" deep to 1-1/8" deep 4. The recessed pan fitting has four pre-drilled countersunk holes, keeping the bolts flush with the surface.
NoteMounting plate and hardware are NOT included.
Description
-Universal used in organized garages, warehouses, and workshops.-Perfect for trucks, pickups, campers, vans, boats, and trailers.
-Ideal for securing kayaks, ATVs and other powersport equipment, bikes, refrigerators and camping gear, etc.
How to install the D-ring?
1. Choose a versatile tie-down spot,such as corners of truck beds and trailers.
2. Set a mounting plate down on the space you wish to install a D-ring and cross the mounting hole centers.
3. With a hole saw and chisel, use the center spot to cut a 3" x 3-1/8" hole that gradually advances from 9/16" deep to 1-1/8" deep.
4. The recessed pan fitting has four pre-drilled countersunk holes, keeping the bolts flush with the surface. If you are using a backplate, place it on the trailer underside; secure each bolt with a washer and nut on the other side of the mounting surface.
2. Gimiton 12" Kayak Rod Tamer Straps Holder, 4Pc Boat Fishing Rod Tamer Strap + 4Pc Kayak Paddle Clip, Deck Mount Connector for Boat & Marine FishingTotal 8Pcs
Feature
12" STRAP LENGTH - holds up to 4 fishing rods.SCREWS INCLUCED - stainless steel screws included, easy to install.
FUNCTION - strap stretches over rods and hook into a loop mounted on the deck.
POLYURETHANE MATERIAL - retain its stretch, remains unaffected by sunlight and most chemicals.
4PACK LOCATING CLIP - holding hole size 0.95", Fits most standard paddle shafts 1-1/8" to 1-1/4" diameter.(SCREWS ARE NOT INCLUDED)
Description
4x tamper strap:Specification:
Material: Polyurethane
Color: black
Strap length: 12 Inch
Quantity: 4pcs
Features:
Holds up to 4 fishing rods.
Unaffected by sunlight and most chemicals.
Stainless steel screws included, easy to install.
Strap can retract into the gunwale when not in use.
Strap end mounts to the deck with one countersunk screw.
4x locating clip:
Specification:
Material: plastic
Color: black
Weight: 24 g
Height 1.06 inch
Holding hole size: about 0.95"
Quantity: 4pcs
Features:
Screws are NOT included.
Easy handling and operation.
Excellent for many DIY projects.
Fits most standard paddle shafts 1-1/8" to 1-1/4" diameter.
The screw mount sits under the rubber so the screw will not scratch your paddles.
3. Simpson Strong Tie STHD10-10 STHD10 12-Gauge 24-5/8 in. Strap Tie Hold Down (10-Pack)
Feature
The nailing pattern allows for nailing to the edges of double 2x'sStrap nail slots are countersunk to provide a lower nail head profile
The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spelling
Standard strap length: 24-5/8 in
Made from 12 gauge steel
Description
The stud is an embedded strap-tie hold own offering high load capacity and a staggered nail pattern to help minimize splitting. The stud incorporates many features that aid correct installation and improve performance. When installed on the forms with the strap mate strap holder the unique design of the stud delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement.4. LIOOBO 12pcs Kayak D Ring Stainless Steel Canoe Boat Fishing Rigging Sailing Camping Hardware Accessorie Safety Deck Loop Mounting Tie Down Kit
Feature
Canoe Kayak Accessories Stainless Steel D-Ring Fishing Rigging Bungee Boat Supplies for Ocean Boats and RowboatsEmbedding the D-Ring fishing rigging bungee, no deformation or crack concern, super solid. For extra safety, we also match with a countersunk head cap screws.
The D-Ring fishing rigging bungee are boat accessories, suitable for ocean boats, canoes, rowboats and other boats . Also fit for seats accessories. Simple design, easy to use.
The countersunk head hexagonal screw and embedded buckle make it safe and convenient. Allow quick connect and fix, is an ideal for inserting ropes
Mading of 304 hardness stainless steel, strong and glossy. Adopt polishing process, durable and wear resistance, no rust concern.
Description
DescriptionThis D-Ring Fishing Rigging Bungee is boat accessory, suitable for ocean boats, canoes, rowboats and other boats, which is made of 304 hardness stainless steel, super strong and solid. Adopting polishing process, durable and wear resistance, no rust concern.For extra safety, we also match with a countersunk head cap screws. Simple design, easy to use. Allow quick connect and fix, this buckle is an ideal for inserting ropes or other items to fasten things.
Features
- Color: As shown.
- Material: Stainless steel.
- Size: 2.1 x 5.2 x 0.8 cm.
- Mading of 304 hardness stainless steel, strong and glossy. Adopt polishing process, durable and wear resistance, no rust concern.
- Embedding the D-Ring fishing rigging bungee, no deformation or crack concern, super solid. For extra safety, we also match with a countersunk head hexagonal screw.
- These D-Ring fishing rigging bungees are boat accessories, suitable for ocean boats, canoes, rowboats and other boats . Also fit for seats accessories. Simple design, easy to use.
- The countersunk head hexagonal screw and embedded buckle make it safe and convenient. Allow quick connect and fix, is an ideal for inserting ropes or other items to fasten things.
Package Including
12 x D-Ring Fishing Rigging Bungee
5. Simpson Strong Tie STHD14RJ STHD14 12-Gauge 39-5/8-Inch Rim Joist Strap Tie Hold Down
Feature
The nailing pattern allows for nailing to the edges of double 2x'sStrap nail slots are countersunk to provide a lower nail head profile
The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spelling
Rim Joist Strap Length: 39-5/8 in
Made from 12 gauge steel
Description
The STHD is an embedded strap-tie hold own offering high load capacity and a staggered nail pattern to help minimize splitting. The STHD incorporates many features that aid correct installation and improve performance. When installed on the forms with the Strap Mate strap holder the unique design of the STHD delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement.6. Yundxi 2 PCS Rod Tamer Strap Holder Rod Saver Deck Mount Connector Kayak Marine Boat Rubber Canoe Paddle Fishing Rod Holder Clip with Screws Vertical Mounted
Feature
You will get 2 pieces fishing rod tie downs for boats, all the same sizesDeck mount connector for holding Fishing rod,Non-corrosive molded ends & hooks, will not snag hooks
Strap length: 12 Inch(not include joint), holds up to 4 fishing rods
Polyurethane material, retain its stretch, remains unaffected by sunlight and most chemicals
Stainless steel screws included, easy to install
Description
Description:
Strap stretches over rods and hook into a loop mounted on the deck
Gunwale mounting flange mounts into a 3/4" hole in the gunwale with 2 countersunk screws
Strap can retract into the gunwale when not in use
Deck mount - strap end mounts to the deck with one countersunk screw
Screws included, easy to install
Specification:
Deck Mount Connector for Holding Fishing Rod
Non-corrosive molded ends & hooks, will not snag hooks
Material: Bungee + Nylon
Color: Black
Size Chart:
Strap Length: Approx. 12 inch / 30.48 cm (holds up to 3 - 4 fishing rods)
Strap Length: Approx. 18 inch / 45.72 cm (holds up to 5 - 6 fishing rods)
Package Includes:
2 Pieces Rod Straps
2 Pieces Holders
6 Pieces Screws
7. Recessed D Ring Plate Rope Lashing Tie Down f Enclosed Cargo Trailer Pickup (4 Pack)
Feature
Bolt-OnRecessed Style
Description
4 each plated Steel recessed floor or wall tie down anchor points. Rated at 5,000-6,000lb minimum breaking strength with a 1,670-2,000lb WLL (working load limit). Anchor points also refered to as Pan Fittings measure 4 1/2" wide x 4 7/8" high x 7/8" deep. Mounting holes may be countersunk (not shown) for use with flat head screws depending on current stock at time of shipment. Tie down rings are recessed and flush with surface when not in use or swivel up to match the angle of your tiedown. *This item may or may not have a drain hole. Great for Truck Trailers, Utility Trailers, RV's, Auto & ATV Tiedowns, Race Car Trailers, Farm applications and many more uses. WARNING: Do not exceed working load limit. This lot of 4 anchor points weighs 8 lbs and will be shipped from our Just Harris zip code of 97002 in one box to your confirmed shipping address.8. 10 D Ring Tie-Down Anchors, Round Bolt-On Cargo Tie Down Flush Mount DRings by DC Cargo Mall, Strong Steel TieDown Anchor for Truck, Trailer, Flatbed, Pickup Bed (10)
Feature
When You Need To Safely Transport Your Motorcycle, snowmobile, kayak, landscaping equipment, farm tools, and other cargo, these TEN reliable Flush Mount Tie Down Anchor D Rings are the Most Reliable Tiedowns; they are Simple To Install and Offer A Lifetime Of Dependable Strength! NOTE: mounting hardware is not included in THIS product.Click The Images for a DETAILED SKETCH with all DIMENSIONS of these D ring pan fitting tiedowns. This kit includes 10 round 4-1/4" diameter Pan Fitting D Ring Trailer TIEDOWN ANCHORS. They are made out of Galvanized Steel That Ensures Superior Strength And Corrosion- & Rust-Resistance with an assembly break strength of 1,200 pounds and a Safe Working Load Limit of 400 pounds
Installing These DURABLE Cargo Tie-Down Anchors into the floor of your mounting area is SIMPLER than you make think. Follow the directions provided in description below, and we send you an email with instructions upon purchase; the 2 1/4" diameter bolting holes keep these tie-downs even with your mounting surface so No Tripping, and the slots on bottoms let water drain out
These Tie-Downs Can Be Used Easily In So Many Custom Ways. ANCHOR tie downs, S-hook or J-hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on Pickup Truck Beds, Utility Trailers, Flatbeds, In Enclosed Trailers, Boats, And Vans by just inserting the hook ends or strap webbing through the inner clearance of 1 3/8" x 1 1/2" D Rings On These Recessed Pan Fittings
DC Cargo Mall Is The Manufacturer And Only Seller Of These Quality Tie Down D-Rings. We are based in the USA and are HERE FOR YOU. If you have any Questions, Comments, Or Interest In Bulk/Custom Orders, our real human NJ-based customer service representatives are ALWAYS Happy To Assist and we stand behind our products with a CONFIDENT 100% Payment-Back :) Guarantee!
Description
10 D Ring TieDownsThese are the perfect cargo tie-down D rings for all your tiedown needs. Just bolt them down anywhere - inside your trailer or enclosed van, on your truck bed, in your warehouse, at your dock, etc. and then use to anchor tiedown straps, hooks, bungee cords, and ropes. They're great for securing tarps, boats, farm equipment, camping gear, motorcycles and bikes, trailer loads, and other freight.
Once you install these low-mount Drings, you'll realize how versatile and handy they are. They lie so close to the floor that they present almost no tripping hazard, and the D-rings can go down when you're not using them.
- Each tie down has an assembly break strength of 1200 pounds and a safe working load limit of 400 pounds.
- Made out of solid steel that will last. Galvanized to reduce corrosion and rust
- Convenient and reliable
DC Cargo Mall is the manufacturer and authorized seller of this item. We stand behind our products with a 100% happiness guarantee. For additional info, just email or call us at 866.998.0577 (Eastern time).
9. DC Cargo Mall D Ring Tie-Down Anchors (Large Square), Recessed Pan Fitting DRings Heavy Duty Steel Cargo Tie Downs by, Truck/Trailer/Flatbed/Pickup TieDown Anchor
Feature
NOTE mounting hardware is sold separately on Amazon or as a bundle kit but is NOT included in THIS product. When you need to safely transport your motorcycle snowmobile landscaping equipment farm tools and other gear THIS LARGE RECESSED TIE DOWN ANCHOR D RING IS THE ABSOLUTE ELITE IN SUPERIOR TIEDOWN ANCHORS it is fairly simple to install and offers A LIFETIME OF DEPENDABLE STRENGTH Click on the images to see more angled views of this square pan fittingThe 9by32in diameter COUNTERSUNK BOLTING HOLES in the 4 pan fitting corners provide a LOW FLOOR FLUSH MOUNT so that the pan fitting is even with your mounting surface and the weep holes on bottom of the pan ensure that WATER DRAINS OUT
This product includes a recessed D ring anchor only the D ring pan fitting is also available in a separate kit with a lock plate and bolting hardware if you have any QUESTIONS COMMENTS OR INTEREST IN BULKbyCUSTOM ORDERS our customer service representatives are ALWAYS HAPPY TO ASSIST and we stand behind our products with a CONFIDENT 100Percent MONEY BACK HAPPINESS GUARANTEE
Use a hole saw and chisel to insert this DURABLE CARGO TIE DOWN ANCHOR into the floor of your mounting area
Top quality cargo control products
Description
4-Pack Flush Mount D Ring Cargo Tie-Down Anchors for Flatbeds, Utility Trailer, Pickup Truck BedThese recessed pan fitting D rings are made specifically for when you cannot have an idle D ring popping out of the floor of your vehicle, tripping people and getting in the way of cargo placement. The square recessed pan gets bolted into your wooden floor; the D ring lies flush in the pan when not in use and can be lifted upward for use as a cargo tie-down anchor.
Galvanized Steel D RingsThe D-rings have a clearance of 1 1/2" x 1 1/2". These pan fitting are made of steel that can endure the elements and is galvanized to resist corrosion and rust; they have a working load limit of 2,000 pounds.
A Simple Guide to Installing Your Recessed Pan Fitting D Ring Tie-Down AnchorsAlthough not absolutely necessary, it is best to use mounting plates (not included in this product) when installing recessed D ring pan fittings.
1. Try to choose a versatile tie-down spot that will be convenient for all kinds of loads. Corners of truck beds and trailers are often optimal.2. Set a mounting plate down on the space you wish to install a D ring and cross the mounting hole centers so you have a perfect center spot.
3. With a hole saw and chisel, use the center spot to cut a 3" x 3-1/8" hole that gradually advances from 9/16" deep to 1-1/8" deep because the recessed pan fitting is deeper on one side.
4. The recessed pan fitting has four pre-drilled holes - one in each corner. They are countersunk, with the holes narrowing on bottom and widening towards the surface, ensuring the bolts remain flush with the surface. If you are using a backplate, place it on the trailer underside; secure each bolt with a washer and nut on the other side of the mounting surface.
5. Your tie-down anchor is now ready to go! Use it to anchor chains, S hook straps, bungee cords, motorcycle tie-downs, and other cargo control products.
10. Recessed Tie-Down D Ring Trailer Cargo Load Tiedown Anchor, Square Floor Recessed Pan Fitting, Galvanized Steel Countersunk Bolting Holes, Utility Enclosed Trailer Tie Down
Feature
HEAVY DUTY: This heavy duty 1-3/8" x 1-3/8" inner clearance D-ring is made of high quality galvanized steel for rust and corrosion resistance. The tie-down has a break strength of 3,498 pounds and a safe working load limit of 1,666 pounds. NOTE: mounting plate and hardware are NOT included.WELL-DESIGNED: The D-ring lies flush in its 4" x 3-3/4" square recessed pan fitting so the D-ring doesn't hazardously protrude from the floor. Weep holes on bottom of the pan ensure that water drains out.
EASY INSTALLATION: Use a hole saw and chisel and bolting hardware - not included. The 9/32" diameter COUNTERSUNK bolting holes provide a low floor flush mount onto wooden trailer floors and other surfaces. See images for installation guide.
ANCHOR ACTION: Trailering your motorcycle or snowmobile cross-country? Strapping down pallets in a warehouse? Anchoring boats and marinas at the dock? Get ready for some ANCHOR ACTION with these versatile and dependable recessed tiedowns. Easily secure logistic straps, bungee cords, ropes, soft loops and chains.
DC CARGO MALL MANUFACTURER: We stand behind our product with a 100% payment back guarantee. If you have questions, feedback, or interest in bulk/custom orders just give us a call at 866-998-0577 or email via Amazon. Based in New Jersey with informed and friendly customer service, we're here for you!
Description
Reliable Trailer Freight Load Tie-Down Anchor - Floor Mount D RingRecessed pan fitting D ring anchors make cargo securement easy, preventing the ring from tripping people and making freight placement difficult. The D ring can be lifted upward and lies flush in the pan when not engaged.
Galvanized Steel D Ring Cargo Tie-Down Anchor
This D ring has an inner clearance of 1 3/8" x 1 3/8".
It is made of steel that can endure the elements and a galvanized to resist corrosion and rust.
This square flush mount D ring pan fitting has an assembly strength of 3,498 lbs. and a working load limit of 1,166 lbs.
A Simple Guide to Installing Your Recessed Pan Fitting D Ring Tie-Down Anchors
Although not absolutely necessary, it is best to use mounting plates (available separately or as a kit) when installing recessed D ring pan fittings.
1. Try to choose a versatile tie-down spot that will be convenient for all kinds of loads. Corners of truck beds and trailers are often optimal.
2. Set a mounting plate down on the space you wish to install a D ring and cross the mounting hole centers so you have a perfect center spot.
3. With a hole saw and chisel, use the center spot to cut a 3" x 3" hole that gradually advances from 9/16" to 1-1/8" deep because the recessed pan fitting is deeper on one side.
4. Insert the bolts through the holes that are pre-drilled in each corner. The holes are countersunk, narrowing on bottom and widening towards the surface, to ensure the bolts remain flush with the surface and do not rise above it.
5. If you are using a backplate, place it on the trailer underside; secure each bolt with a washer and nut on the other side of the mounting surface.
6. Your tie-down anchor is now ready to go! Use it to anchor chains, S hook straps, bungee cords, motorcycle tie-downs, and other cargo control products.
DC Cargo Mall: 866.998.0577.
Recent Comments