raspberry pi dac kit buyer’s guide

We spent many hours on research to finding raspberry pi dac kit, reading product features, product specifications for this guide. For those of you who wish to the best raspberry pi dac kit, you should not miss this article. raspberry pi dac kit coming in a variety of types but also different price range. The following is the top 10 raspberry pi dac kit by our suggestions:

Best raspberry pi dac kit

Product Features Editor's score Go to site
Geekworm Raspberry Pi X400 V3.0 DAC+AMP Expansion Board Matching Aluminum Metal Case/Enclosure+Power Switch Kit for Raspberry Pi 3 B+/3 B Geekworm Raspberry Pi X400 V3.0 DAC+AMP Expansion Board Matching Aluminum Metal Case/Enclosure+Power Switch Kit for Raspberry Pi 3 B+/3 B
Go to amazon.com
Seeed Studio ReSpeaker 6-Mic Circular Microphone Array Kit Extension Board aka HAT with 2 ADC Chips and 1 DAC chip for Raspberry Pi Supports 8 Input and 8 Output Channels Seeed Studio ReSpeaker 6-Mic Circular Microphone Array Kit Extension Board aka HAT with 2 ADC Chips and 1 DAC chip for Raspberry Pi Supports 8 Input and 8 Output Channels
Go to amazon.com
Pi-Plate Starter Kit for Raspberry Pi Pi-Plate Starter Kit for Raspberry Pi
Go to amazon.com
X6000P-7.1CH DIY Kits @Pzsmocn for Raspberry Pi 1 Model B+/2 Model B/3 Model B/Home Theater Systems X6000P-7.1CH DIY Kits @Pzsmocn for Raspberry Pi 1 Model B+/2 Model B/3 Model B/Home Theater Systems
Go to amazon.com
Seeed Studio ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi Seeed Studio ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi
Go to amazon.com
Pimoroni pHAT DAC 24-bit/192KHz Sound Card for Raspberry Pi Zero / A+ / B+ / Raspberry Pi 2 Model B Pimoroni pHAT DAC 24-bit/192KHz Sound Card for Raspberry Pi Zero / A+ / B+ / Raspberry Pi 2 Model B
Go to amazon.com
WINGONEER Case Kit for X400 V3.0 DAC+AMP Expansion Board WINGONEER Case Kit for X400 V3.0 DAC+AMP Expansion Board
Go to amazon.com
ILS. - PCM5102 / PCM5102A I2S DAC decoder Card 32Bit 384K per core Player Red Raspberry Pi ILS. - PCM5102 / PCM5102A I2S DAC decoder Card 32Bit 384K per core Player Red Raspberry Pi
Go to amazon.com
Seeed Studio ReSpeaker 4-Mic Linear Array Kit 2 ADC Chips and 1 DAC Chip 4 Microphones 8 Input/Output Channels Array Grove Support Compatible with Raspberry Pi 40-pin Headers Seeed Studio ReSpeaker 4-Mic Linear Array Kit 2 ADC Chips and 1 DAC Chip 4 Microphones 8 Input/Output Channels Array Grove Support Compatible with Raspberry Pi 40-pin Headers
Go to amazon.com
HiFiBerry Case for DAC+ and Digi+ (Black) HiFiBerry Case for DAC+ and Digi+ (Black)
Go to amazon.com
Related posts:

1. Geekworm Raspberry Pi X400 V3.0 DAC+AMP Expansion Board Matching Aluminum Metal Case/Enclosure+Power Switch Kit for Raspberry Pi 3 B+/3 B

Feature

Match with X400 DAC HIFI Expansion Board and Raspberry Pi 3 Model B+ Plus/3B.
Ultra-compact aluminum chassis, lightweight and durable, long-lasting stainless.
All ports and slots of the case can match with Raspberry Pi and X400 perfectly, Easy to change the Raspberry Pi OS SD card - No need to open the case.
Exhaust holes surface can reach perfect heat dissipation.
Equipped with 19mm metal latching power switch, aspberry Pi status LED, haluminum potentiometer Knob. Installation Guide, please refer to our wiki: www.raspberrypiwiki.com/index.php/X400_V3.0

Description

Note: The raspberry pi board and X400 board are both not included.

[Packing List]
1 x X400 v3.0 enclosure
1 x Metal power switch
1 x Aluminum potentiometer Knob
4 x Screw M2.5 *28mm
6 x Screw M3 *6mm
1 x 1.5mm hex kety

[Overview]
This is a high quality aluminum metal enclosure that match with RPi and X400 perfectly. All ports and slots of the case can match with Raspberry Pi and X400 perfectly, with 19mm metal latching power switch and high quality solid aluminum potentiometer Knob, protect your pi well. For x400 V3.0 Expansion Board, please refer to: X400 Expansion Board.

[Features]
- Match with RPi and X400
- Ultra-compact aluminum chassis
- All ports and slots of the case can match with Raspberry Pi and X400 perfectly
- Exhaust holes surface can reach perfect heat dissipation
- Equipped with 19mm metal latching power switch
- Equipped with high quality solid aluminum potentiometer Knob
- Raspberry Pi status LEDs still visible
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Reinforced aluminum material, lightweight and durable, long-lasting stainless
- Weight: about 153g

2. Seeed Studio ReSpeaker 6-Mic Circular Microphone Array Kit Extension Board aka HAT with 2 ADC Chips and 1 DAC chip for Raspberry Pi Supports 8 Input and 8 Output Channels

Feature

2 ADC chips and 1 DAC chip; Six microphones array; 8 input and 8 output channels
Grove support; Headset and speaker voice output; Compatible with Raspberry Pi 40-pin headers
For Smart speaker;Intelligent voice assistant systems; Voice recorders; Voice conferencing system
Widely used in Meeting communicating equipment; Voice interacting robot; Car voice assistant; Other scenarios need voice command

Description

Description

Seeed's ReSpeaker 6-Mic Circular Array Kit is an extension board, aka HAT designed for Raspberry Pi. It's a circular microphone array kit, comes with six microphones and
designed for AI and voice applications. That means you can build a more powerful and flexible voice product with Raspberry Pi which can integrate Amazon Alexa Voice
Service, Google Assistant, and so on.

ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi consists of two boards, one is voice accessory HAT, another is six microphones circular array.

ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi support 8 input & 8 output channels in Raspbian system. The first 6 input channel for microphone recording,rest
of 2 input channel are echo channel of playback. The first 2 output channel for playing, rest of 6 output channel are dummy.


Features

  • 2 ADC chips and 1 DAC chip

  • 8 input and 8 output channels

  • Six microphones array

  • Grove support

  • Compatible with Raspberry Pi 40-pin headers

  • Headset and speaker voice output



  • Applications

  • Smart speaker

  • Intelligent voice assistant systems

  • Voice recorders

  • Voice conferencing system

  • Meeting communicating equipment

  • Voice interacting robot

  • Car voice assistant

  • Other scenarios need voice command


    Part List

    ReSpeaker Voice Accessory HATx1
    ReSpeaker 6-Mic Circular Array for Voice Accessory HATx1
    20cm Ribbon Cablex1

    3. Pi-Plate Starter Kit for Raspberry Pi

    Feature

    Includes the DAQCplate Data Acquisition and Control card - A powerful and affordable board for bringing real world data input and output to your Raspberry Pi.
    Rich documentation with examples on the Pi-Plates website
    The CASEplate, a clean, secure, and effective mounting system for your Raspberry Pi and Pi-Plates.
    8 channel 10 bit A/D converter, two 10 bit DACs, 7 high current drivers, and 8 protected digital inputs.

    Description

    A pair of core Pi-Plates products including a DAQCplate Data Acquisition and Control Board, and the CASEplate for a clean, secure, and sturdy mounting system. A great value on a great starter kit!

    4. X6000P-7.1CH DIY Kits @Pzsmocn for Raspberry Pi 1 Model B+/2 Model B/3 Model B/Home Theater Systems

    Feature

    Ideal for 7.1 channel surround audio systems
    Ideal for Home Theater Systems
    X6000P-7.1CH DIY Kits is for the people who want to make a HiFi environment at home
    Connects directly to the Raspberry Pi,Powers the Raspberry Pi - no additional power supply
    Access to Raspberry Pi GPIO,Easy DIY with Raspberry Pi

    Description

    Overview

    Used four ESS Tech Sabre premier stereo DACs ES9023
    ES9023 delivers jitter-free studio quality audio with 112dB DNR
    Each DAC has independent ultra-low-jitter clock generator
    Used the Texas Instruments ultra-low-noise voltage regulator
    Supports up to 1TB 2.5-inch SATA hard drives
    Supports SPDIF Optical Digital Audio

    Technical Specification

    - AC 100 - 240V input to 50/60Hz,5Vdc 4A output
    - With 2 snap-in plugs for North America(US) and Europe(EU)
    - DC Power Plug Size: 5.5*2.5mm
    - OSMC - 2.0 stereo audio/5.1 channel surround sound/7.1 channel surround sound
    - Openelec - 2.0 stereo audio/5.1 channel surround sound/7.1 channel surround sound
    - Moode Audio Player - 2.0 stereo audio outputs
    - Raspbian Jessie - 2.0 stereo audio outputs
    - Rune audio - 2.0 stereo audio outputs
    - Pi Core Player - To be tested
    - Power supply: +5Vdc +/-5%
    - Input Ports:1* HDMI
    - Output Ports:1* HDMI,1 * Optical,4 * 3.5mm Phone Jack
    - Analog audio output level: 2V RMS
    - Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
    - HDMI Audio Format:LPCM 2/5.1/7.1CH,Dolby Digital 2 to 5.1CH, DTS 2 to 5.1CH, - Dolby Digital Plus Dolby TrueHD,and DTS-HD Master Audio
    - Optical Audio Format: LPCM 2CH, Dolby Digital 2 to 5.1CH,and DTS 2 to 5.1CH
    - Size:122mm*90mm* 90mm

    Note

    For use with original power supply unit only
    DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
    Approx 3 seconds delay to turn on Raspberry Pi after power apllied.(The powerful HDMI audio processing chipset needs time to bootup)

    Shipping List

    X6000-7.1CH Expansion board*1
    HDMI bridge*1
    Spacer M2.5 *20mm * 4
    Screw M2.5*6mm* 8
    Power supply(AC 100-240V input 5Vdc 4A output W/EU and US plug/5.5*2.5 DC plug/1.2M cable w/magnet ring)*1

    5. Seeed Studio ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi

    Feature

    ReSpeaker 6-Mic Circular Array Kit is an extension board, aka HAT designed for Raspberry Pi
    It's a circular microphone array kit, comes with six microphones and designed for AI and voice applications
    Support 8 input & 8 output channels in Raspbian system
    Compatible with Raspberry Pi 40-pin headers
    2 ADC chips and 1 DAC chip

    Description

    Description
    Seeed's ReSpeaker 6-Mic Circular Array Kit is an extension board, aka HAT designed for Raspberry Pi. It's a circular microphone array kit, comes with six microphones and designed for AI and voice applications. That means you can build a more powerful and flexible voice product with Raspberry Pi which can integrate Amazon Alexa Voice Service, Google Assistant, and so on.

    ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi consists of two boards, one is voice accessory HAT, another is six microphones circular array.

    ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi support 8 input & 8 output channels in Raspbian system. The first 6 input channel for microphone recording,rest of 2 input channel are echo channel of playback. The first 2 output channel for playing, rest of 6 output channel are dummy.

    Features
    2 ADC chips and 1 DAC chip
    8 input and 8 output channels
    Six microphones array
    Grove support
    Compatible with Raspberry Pi 40-pin headers
    Headset and speaker voice output

    Part List
    ReSpeaker Voice Accessory HAT *1
    ReSpeaker 6-Mic Circular Array for Voice Accessory HAT *1
    20cm Ribbon Cable *1

    6. Pimoroni pHAT DAC 24-bit/192KHz Sound Card for Raspberry Pi Zero / A+ / B+ / Raspberry Pi 2 Model B

    Feature

    24-bit/192KHz Sound Card
    Compatible with Raspberry Pi Zero / A+ / B+ / Raspberry Pi 2 Model B
    Line out stereo jack
    Kit includes: Assembled pHAT DAC and 2x20 0.1" female GPIO header
    Texas Instrument's PCM5102A stereo audio DAC chip

    Description

    The pHAT DAC provides a super affordable high-quality DAC for the Raspberry Pi. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry Pi's I2S interface on the 2x20 pin GPIO header. This kit has a 3.5mm stereo jack pre-assembled but doesn't include a dual RCA phono connector. Though designed to match the format of the Raspberry Pi Zero it is compatible with all 40-pin GPIO Raspberry Pi variants (2/B+/A+/Zero). Features: 24-bit audio at 192KHz Line out stereo jack Optional landing for dual RCA phono connector Compatible with Pi 2/B+/A+/Zero pHAT format board Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface Kit includes: Assembled pHAT DAC 2x20 0.1" female GPIO header At the heart of pHAT DAC is Texas Instrument's PCM5102A stereo audio DAC chip.

    7. WINGONEER Case Kit for X400 V3.0 DAC+AMP Expansion Board

    Feature

    All ports and slots of the case can match with Raspberry Pi and X400 perfectly
    Exhaust holes surface can reach perfect heat dissipation
    Onboard RCA connectors, 3.5mm stereo headphone jack, speaker & power screw terminals, and gold-plated high-current DC power jack;Equipped with 19mm metal latching power switch
    Equipped with high quality solid aluminum potentiometer Knob
    Easy to change the Raspberry Pi OS SD card - No need to open the case

    Description

    WINGONEER trademark Reg.NO:4747611

    WINGONEER Case Kit For X400 V3.0 DAC+AMP Expansion Board

    Features:
    Ultra-compact aluminum chassis
    All ports and slots of the case can match with Raspberry Pi and X400 perfectly
    Exhaust holes surface can reach perfect heat dissipation
    Equipped with 19mm metal latching power switch
    Equipped with high quality solid aluminum potentiometer Knob
    Raspberry Pi status LEDs still visible
    Easy to change the Raspberry Pi OS SD card - No need to open the case

    Packing list:
    1 x X400 v3.0 enclosure
    1 x Metal power switch
    1 x Aluminum potentiometer Knob
    4 x Screw M2.5 *28mm
    6 x Screw M3 *6mm
    1 x 1.5mm hex kety

    8. ILS. - PCM5102 / PCM5102A I2S DAC decoder Card 32Bit 384K per core Player Red Raspberry Pi

    Description

    Features: 1. I2S / Support signel left justified directly input (can go hand) 2. maximum support 32-bit 384K campionamento3 frequency. A can set two FLT filter mode (NOM normal or delay mode LOW mode) -Power hand manual! 4. The direct output is an audio voltage 2.1 V RMS, the high frequency is pure, low frequency is satiety, over ES9023
    5. Note BCK - DATE marked as inverse When using pls, make BCK as DATA, DATA as BCK
    technical specifications: Dimensions: 4,8x4,8 cm
    SNR: 112 dBDistorsione: -93db
    Operating voltage: DC 5V-10V
    The package includes: 1x
    decoder DAC PCM5102

    9. Seeed Studio ReSpeaker 4-Mic Linear Array Kit 2 ADC Chips and 1 DAC Chip 4 Microphones 8 Input/Output Channels Array Grove Support Compatible with Raspberry Pi 40-pin Headers

    Feature

    2 ADC chips and 1 DAC chip, 8 input and 8 output channels, four microphones array
    Grove support, compatible with Raspberry Pi 40-pin headers
    Headset and speaker voice output
    Use as smart speaker, voice recorders, intelligent voice assistant systems

    Description

    DESCRIPTION

    Seeed's ReSpeaker 4-MicsLinear Array Kit for Raspberry Pi is an extension board, aka HAT designed for Raspberry Pi. It's a linear microphone
    array kit, comes with four microphones and designed for AI and voice applications. That means you can build a more powerful and flexible voice
    product with Raspberry Pi which can integrate Amazon Alexa Voice
    Service, Google Assistant, and so on.

    ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi consists of two boards, one is voice accessory HAT, another is four microphones linear array.
    ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi support 8 input & 8 output channels in Raspbian system. The first 6 input channel for microphone
    recording(only first 4 input channels are valid capture data), rest of 2 input channel are echo channel of playback. The first 2 output channel for playing,
    rest of 6 output channel are dummy.


    Features

  • 2 ADC chips and 1 DAC chip

  • 8 input and 8 output channels

  • Four microphones array

  • Grove support

  • Compatible with Raspberry Pi 40-pin headers

  • Headset and speaker voice output



  • Application Ideas

  • Smart speaker

  • Intelligent voice assistant systems

  • Voice recorders

  • Voice conferencing system

  • Meeting communicating equipment

  • Voice interacting robot

  • Car voice assistant

  • Other scenarios need voice command

  • 10. HiFiBerry Case for DAC+ and Digi+ (Black)

    Feature

    A black laser-cut case for the Raspberry Pi model B+ and the HiFiBerry DAC+ (RCA version) and Digi+.
    Note that this case is not compatible with the the Raspberry Pi model A/B and our DAC or Digi.
    Skill Level : Kit that snaps together

    Description

    A black laser-cut case for the Raspberry Pi model B+ and the HiFiBerry DAC+ (RCA version) and Digi+. Note that this case is not compatible with the the Raspberry Pi model A/B and our DAC or Digi.

    Conclusion

    All above are our suggestions for raspberry pi dac kit. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using raspberry pi dac kit with us by comment in this post. Thank you!

    You may also like...