pto shaft clutch buyer’s guide for 2024

We spent many hours on research to finding pto shaft clutch, reading product features, product specifications for this guide. For those of you who wish to the best pto shaft clutch, you should not miss this article. pto shaft clutch coming in a variety of types but also different price range. The following is the top 10 pto shaft clutch by our suggestions:

Best pto shaft clutch

Product	Features	Editor's score	Go to site
	Add on Rotary Cutter Slip Clutch Easily Add a Slip Clutch to Your Splined Pto		Go to amazon.com
	Tractor PTO Slip Clutch, 1-3/8" x 6 Spline (both ends) PTO Drive Line Accessory		Go to amazon.com
	Torque Limiter 1 3/8" 6 SpLine Male/1 3/8" 6 SpL Part No: A-ECC0020		Go to amazon.com
	A&I Clutch Assembly Slip (7500438)		Go to amazon.com
	King Kutter Rotary Tiller Pto Shaft with Slip Clutch code 147122		Go to amazon.com
	Replacement 3-Point Tiller Slip Clutch Pto Shaft with 6" Diameter Clutch		Go to amazon.com
	SLIP CLUTCH 1 3/8-6SPL-1 3/8-6SPL		Go to amazon.com
	50034235 PTO Shaft With Slip Clutch Driveline for Bush Hog JD Rotary Cutter		Go to amazon.com
	Replacement 3-Point Rotary Tiller Slip Clutch PTO Shaft w/Clutch - 32"		Go to amazon.com
	All States Ag Parts PTO Driveline Shaft Series 5 540 Spline Shearbolt Clutch 540 Spline Without Shearbolt		Go to amazon.com

1. Add on Rotary Cutter Slip Clutch Easily Add a Slip Clutch to Your Splined Pto

Feature

Interchange Part Number:

Description

Add on Rotary Cutter Slip Clutch Easily Add a Slip Clutch to Your Splined PTO This clutch features 1-3/8" X 6 spline male shaft and a 1-3/8" X 6 spline female with quick disconnect button. Easily adjustable torque setting, replaceable friction disc. Torque setting chart included!

2. Tractor PTO Slip Clutch, 1-3/8" x 6 Spline (both ends) PTO Drive Line Accessory

Feature

Drive shaft End: 1-3/8 x 6 Spline Quick Release.
Implement end: 1-3/8 x 6 Spline Clamp (Dual Pinch Bolts)
To be used with Series 4,5 and 6 Drive Lines
Clutch Diameter: 7-3/32"
7-1/2" OD

Description

This clutch provides protection to your implement input shaft and your tractor output shaft. When mowing/rough cutting, and you hit objects such rocks or stumps you can break the tractor out put shaft or twist a driveline. This unit will eventually pay for itself in time/money spent fixing/replacing your equipment.

- Drive shaft End: 1-3/8 x 6 Spline Quick Release.

- Implement end: 1-3/8 x 6 Spline Clamp (Dual Pinch Bolts)

- To be used with Series 4,5 and 6 Drive Lines.

- 900 N-m (664 ft-lb) Rating

- 7-1/2" OD

- Clutch Diameter: 7-3/32"

- Weight: 19lbs

-

3. Torque Limiter 1 3/8" 6 SpLine Male/1 3/8" 6 SpL Part No: A-ECC0020

Feature

Descriptions:Friction Clutch Female (A):1-3/8" x 6 Spline Male (B):1 3/8" x 6 Spline

Description

New Torque Limiter for use in converting rotary cutters from shear pin type to slip clutch. Male and female sides are 1-3/8" 6 spline. Fits Bondioli & Pavesi, Comer, and Walterscheid applications. For Use in Converting Rotary Cutters from Shear Pin Type toSLip Clutch. OEM Cross Reference AK138125, ECC0021, PM560-6006, VTE7081, W5606006DS, 125802, 560-6006 Fits models: Bondioli & Pavesi Universal Friction: FF, Comer Universal Friction: FM, Walterscheid Universal Friction: K89

4. A&I Clutch Assembly Slip (7500438)

5. King Kutter Rotary Tiller Pto Shaft with Slip Clutch code 147122

Feature

Series 4 Metric, 47hp rated
1-3/8" X 6 Spling tractor end with quick disconnect
7-1/2" slip clutch with 2 friction disc and 1-3/8" X 6 spline mounting
34" overall length with instructions to measure and trim to length

Description

King Kutter Rotary Tiller Pto Shaft with Slip Clutch code 147122. 1-3/8" X 6 spline tractor end with quick disconnect , 1-3/8" X 6 Spline 7-1/2" diameter 2 disc slip clutch implement end with locking bolt. 34" overall length, easily cut down to size, instructions included!

6. Replacement 3-Point Tiller Slip Clutch Pto Shaft with 6" Diameter Clutch

Feature

1-3/8" X 6 SPline Tractor End with Quick Disconnect Yoke
1-3/8" X 6 Spline Slip Clutch with Conical Pin Lock
29-1/2" overall Length
6-1/4" Diamater Slip Clutch works where larger diameter clutches won't
Slip clutch is adjustable, friction disc are replaceable

Description

Replacement 3-Point Tiller Slip Clutch Pto Shaft with 6" Diameter Clutch, 29-1/2" Overall Length, Series 4,

7. SLIP CLUTCH 1 3/8-6SPL-1 3/8-6SPL

Feature

Please read descriptions carefully before ordering.

Description

971-5606006. SLIP CLUTCH 1 3/8-6SPL-1 3/8-6SPL. STD QTY: 1.

8. 50034235 PTO Shaft With Slip Clutch Driveline for Bush Hog JD Rotary Cutter

Feature

Size: 5, Minimum C-to-C Length: 885 mm/ 35"
Maximum C-to-C Length: 1310 mm/ 52", Total Collapsed Length: 1140 mm/ 45"
Tractor: 1 3/8" -6 , Implement: 1 3/8" - 6 SPL. FF1 FR.CL.
Clutch Diameter: 7.09", Type: Pull/Towed
Series: 100, Category: 4 (47HP)

Description

One New Aftermarket Replacement Rotary Cutter PTO Assembly Driveline (w/ 7" Friction Clutch) made to fit Rotary Cutter models: Bush Hog: 275, 285 (both at 540 Rpm), 12, 305, 306, SQ7, SQ72, SQ84, John Deere: 603, 613, 616, 717 King Kutter: L60-HD, L72 RD, P60-HD, P72 RD Kubota: L360, L366, LM378 Rhino: CY60, CY72, SE6, SE7 Woods: 72, 80, 600 Made to fit Rotary Tiller models: Bush Hog: RTH Land Pride: 25-34-50 Maletti: KZ80 Series PLEASE NOTE: It maybe neccessary to cut this driveline to length. Verify the length by ensuring that sufficient overlap of the drive tubes exists in all working positions without the posibility of bottoming out. Size: 5 Minimum C-to-C Length: 885 mm/ 35" Maximum C-to-C Length: 1310 mm/ 52" Total Collapsed Length: 1140 mm/ 45" Tractor: 1 3/8" -6 Implement: 1 3/8" - 6 SPL. FF1 FR.CL. Clutch Diameter: 7.09" Type: Pull/Towed Series: 100 Category: 4 (47HP) Replaces Part Numbers: CS53516, 88609, CS5094E, CS5110E, CS53514, PM14106546, ECC5383, 111-60S, 14106546, 50034235

9. Replacement 3-Point Rotary Tiller Slip Clutch PTO Shaft w/Clutch - 32"

Feature

Type:PTO, Compatible Equipment Make:Universal, Mpn:R10246
Equipment Type:Rotary Mower, Model Year:Unknown, Brand:RPM TRANSMISSIONS
Model:Several, Part Type:PTO, Compatible Equipment Type:Tiller

Description

RPM High Quality replacement 3-Point mounted Rotary Tiller/Cultivator PTO shaft with clutch!
Series 4 metric spec tiller PTO shaft measures 32 overall length when closed , features a 1-3/8 6 spline yoke on the tractor end with a quick disconect and 1-3/8 6 spline clutch on the implement end with a 6" OD Friction clutch for use on tillers or brush hogs. Fits most brands including Land Pride, Tonutti, Bush Hog, John Deere, Tarter Gate, Kodiak, King Kutter, Sicma, Caroni, Maschio, Sovema, Terra Nova, Rhino, Murattori, Celi, Gearmore and most brands of roto-cultivators. Will fit the King Kutter XB series tiller!Specifications

Series 4 PTO Shaft

1-3/8 with Quick Disconnect 6 Spline yoke

1-3/8 with6" OD Friction clutch

6 Diameter Clutch

Complete with Shielding

Exported By ExportYourStore

10. All States Ag Parts PTO Driveline Shaft Series 5 540 Spline Shearbolt Clutch 540 Spline Without Shearbolt

Feature

PTO, Series #5, 30" From Cross Center to Cross Center, 540 SB CLUTCH X 540 47HP, SNOWBLOWERS, TILLERS
Compressed 36", Extended 50" (1-3/8" 6 Spline QD Collar x 1-3/8" 6 Spline Torque Limiter Clutch) - 47HP
Compressed & Extended measurements are overall lengths
All new, rebuilt and used tractor parts have a 1-year warranty

Description

PTO, Series #5, 30" From Cross Center to Cross Center, 540 SB CLUTCH X 540 47HP, SNOWBLOWERS, TILLERS
Compressed 36", Extended 50" (1-3/8" 6 Spline QD Collar x 1-3/8" 6 Spline Torque Limiter Clutch) - 47HP
Compressed & Extended measurements are overall lengths
All new, rebuilt and used tractor parts have a 1-year warranty

Conclusion

All above are our suggestions for pto shaft clutch. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using pto shaft clutch with us by comment in this post. Thank you!