Looking for a raspberry pi x400? Have a look at this 2024 guide!
When you want to find raspberry pi x400, you may need to consider between many choices. Finding the best raspberry pi x400 is not an easy task. In this post, we create a very short list about top 10 the best raspberry pi x400 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 raspberry pi x400:
Best raspberry pi x400
1. Geekworm Multifunction X400 Expansion Board for Raspberry Pi 2 Model B and B Plus / Raspberry pi Music Player
Feature
This is X400 Raspberry pi Music Player for Raspberry Pi 2 Model B & Raspberry Pi Model B+, No external power supply needed.The X400 Expansion Shield is a highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi Model B+, Raspberry Pi 2 Model B and Raspberry Pi 3 Model B. It uses i2S interface audio solution and supports 24-bit /192KHz high quality sound. It is compatible with other audio equipment via RCA lotus socket. It includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly.
The shield has two digital amplifier output ports, up to 2 x30w speakers can be directly connected. Use this hat to make your Raspberry Pi in to a lossless audio player or a network radio. We recommend using an OS image such as Volumio, RuneAudio, PiMusicBox etc.
[Packing List] 1 x Expansion board; 1 x Screws pack.
Description
[Input Voltage]6V to 24V DC converted 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
[Audio function]
Full- HD audio -- up to 24bit/ 192 kHz playback
Class leading audio; 112 db SNR, and THD of 0.0019%
Audiophile TI Burr Brown 32-bit/ 384 kHz DAC(TI PCM5122)
Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
Integrated hardware volume control
Mute can be enabled/ disabled via jumper
Built in High quality audio headphone amplifier(TI TPA6133A)
Earphone AMP can be enabled/ disabled via jumper
Built in High quality Class-D stereo audio amplifier
Up to 2 x 20W into 4 ohm
AMP can be enabled / disabled via jumper
Phono/RCA connectors
3.5mm stereo audio jack
Speaker terminals
[Wireless]
Built in IR sensor (38KHz)
[Misc]
Power output socket
DIP switch to remove connection from RPi's pin header
Directly connected on top of the Raspberry Pi using the board GPIO header pins
Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
[Packing List]
1 x Expansion board
1 x Screws pack
2. Audio DAC HAT Sound Card (AUDIO+) for Raspberry Pi Zero/A+/B+/Pi 2 : Pi 3 Model B/Better quality than USB
Feature
DAC I2s 24-bit audio with studio sampling qualityLine out stereo 3.5mm jack for stereo input
software volume control
Free RCA connector included
Compatible with Raspberry Pi Zero / A+ / B+ / Pi 2 : Pi 3 Model B
Description
Audio DAC HAT Sound Card (AUDIO) for Raspberry Pi Zero / A+ / B+ / Pi 2 : Pi 3 Model B / Better quality than USB3. Inno-Maker Raspberry Pi HiFi AMP Module, 25W Class-D power amplifier TAS5713 Expansion Board Audio Module for Raspberry Pi 3 B+ Pi Zero Nichicon Capacitor
Feature
RPI-HIFI-AMP amplifier module is a high-quality, highly efficient 25W Class-D power amplifier for the Raspberry Pi.You can get a stereo audio system by mount it onto your Raspberry Pi, Only thing you have to do is connect your loudspeakers to our module.
Rpi-HIFI-AMP amplifier module is the ideal choice for small room audio system.
PI-HIFI-AMP module compatible with many Raspberry pi music playback system such as: OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Debian / Ubuntu etc.
Packing List: 1 x Amplifier HIFI AMP Expansion Board; (Note: the raspberry pi 3 board is not included.)
Description
[Note:] Inno-Maker has experienced embedded design team, we can supply customized board based on Raspberry Pi, Micro:bit, Beaglebone and other open source boards, and provide PCBA production, board testing, and product assembling. [Overall] RPI-HIFI-AMP module is a high-quality, highly efficient 25W Class-D power amplifier for the Raspberry Pi. you can get a stereo audio system by mount it onto your Raspberry Pi. You only thing you have to do is connect your loudspeakers to our module. It's the ideal choice for small room audio system. [Functions and Features:] 1. Fully controllable from the Raspberry Piup to 25W output power, capable of driving 4 Ohm speakers or higher. 2. Support 44.1kHz and 48kHz sample rates. Digital-analog conversion included-no need for external DACs or sound cards. 3. Fully digital sound path for optimal audio performance. Connects directly to the Raspberry Pi no additional cables needed. 4. Wide Power input :12-20v external power input for both RPI and module. HAT size. 5. Up to 90% Efficient. Integrated EEPROM for automatic configuration (Reserve the pin of eeprom). [The third-party system:] RPI-HIFI-AMP module compatible with many Raspberry pi music playback system such as: OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Debian / Ubuntu etc. Packing List: 1 x Amplifier HIFI AMP Expansion Board; (Note: the raspberry pi 3 board is not included.) [Packing List:] 1 x RPI-HIFI-AMP Module Note: The raspberry pi 3 board is not included.4. Inno-Maker Raspberry Pi HIFI DAC Module, PCM5122 HIFI DAC Audio Card Expansion Board for Raspberry Pi 3 B+ Pi Zero etc.
Feature
RPI-HIFI-DAC Module is made to solve the problem of Raspberry Pi with audio files sampled at 44khz and multiple, too much jitter on i2s clocks.We enter the master mode for i2s instead of the RPI giving the clock on the line, the DAC itself sends the clocks and RPI sends the data (file to be played).
RPI-HIFI-DAC is unique for we have implemented the design. First we separated the power on 3 channels and filter it: one for digital side, second for analog, third for the clocks.
We use some good brand LDOs on the market. In addition, we used two oscillators with very low jitter for clock units.
On the analog stage we are using a film capacitor (not ceramic) for a quiet DC to feed the TI IC to reduce signal distortion.
Description
[Note:] Inno-Maker has experienced embedded design team, we can supply customized board based on Raspberry Pi, Micro:bit, Beaglebone and other open source boards, and provide PCBA production, board testing, and product assembling. [Features:] 1. Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality. 2. Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack. 3. With 138mw headphone Amplifier can directly drive headphone. 4. Work status indicators facilitate the understanding of the system working status. 5. HAT size. 6. DAC SNR is 112Db. 7. DAC THD+N @ -1 dBFS -78dB. 8. Full Scale Output of DAC is 2.1Vrms. 9. Dynamic Range of DAC is 112dB. 10. Sampling Frequency ranges from 8kHz to 384kHz. 11. Ultra-low noise voltage regulators for optimal audio performance. 12. Integrated EEPROM for automatic configuration(Option). 13. Automatically switching frequencies according to the input I2S signals. 14. Dual low jitter crystal oscillators for Master Clock generation. 15. Infrared remote control connector (using GPIO26). 16. DAC output coupled with Film capacitor . [The third-party system:] RPI-HIFI-DAC module compatible with many Raspberry pi music playback system such as: OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Debian / Ubuntu etc. Like max2play and Volumio User can easily download the latest software from the official website, follow the official user guide do some simple configuration then you can enjoy it. [Packing List:] 1 x RPI-HIFI-DAC Module Note: The raspberry pi 3 board is not included.5. WINGONEER WX5000 Multifunction Expansion Shield for Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Feature
Supports Operating System: Moode Audio Player; OSMC; Openelec; Raspbian Jessie ; Volumio; Pi Core PlayerDedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality
Used the ESS Technology Sabre premier stereo DAC ES9023
ES9023 delivers jitter-free studio quality audio with 112dB DNR
Used the Texas Instruments ultra-low-noise voltage regulator; ClassD amplifier chipset (TPA3118)
Description
WINGONEER trademark Reg.NO:4747611Key Features
- Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality
- Used the ESS Technology Sabre premier stereo DAC ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Ultra-low-jitter 50MHz clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Used the Texas Instruments ClassD amplifier chipset (TPA3118)
- Up to 2x35w of crystal clear amplification
- Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
- Gold-plated RCA connectors
- Volume control knob
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Connects directly to the Raspberry Pi
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- AMP can be enabled / disabled with jumper link
- Powers the Raspberry Pi - no additional power supply
- Duplicated Raspberry Pi HDMI port
- Easy DIY with Raspberry Pi
Specification
- Power supply: 6-24Vdc
- DC Power Plug Size : 5.5*2.5mm
- Input Ports: 1 x HDMI
- Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
- Output Ports: 1 x HDMI, 2 x RCA connectors
- Analog audio output level: 2V RMS
- Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
- Amplifier output Power: 2 x 35w (4 Ohm 24Vdc)
- Size 122mm x 90mm x 90mm
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
Packing List
1 x WINGONEER X5000 Expansion board
1 x HDMI bridge
1 x Power switch
1 x Volume control board
1 x Speaker connection cable
6. WINGONEER DAC II Hifi Sound Card | ES9018K2M | 384 kHz/32-bit | High-Resolutio | DSD format supported | For Raspberry Pi 3 Model B/3B/2B
Feature
Bit Perfect, Support up to 32Bit/384kHzHigh-performance ES9018K2M DAC Chip
Built-in 5V Voltage Swing Headphone AMP
3.5mm Headphone Output and Line Out(RCA)
Support Digital Volume Control
Description
WINGONEER trademark Reg.NO:4747611WINGONEER DAC II Hifi Sound Card | ES9018K2M | 384 kHz/32-bit | High-Resolutio | DSD format supported | For Raspberry Pi 3 Model B/3B/2B
Features:
Bit Perfect, Support up to 32Bit/384kHz
High-performance ES9018K2M DAC Chip
Built-in 5V Voltage Swing Headphone AMP
3.5mm Headphone Output and Line Out(RCA)
Support Digital Volume Control
Support DSD256/128/64; 32Bit/384KHz(PCM)
Audio Formats Supported: DSD, APE, FLAC, WAV, WMA, AAC, ALAC, AIFF, OGG, MP3
Specification:
Line out:
Frequency Response: 20Hz~20KHz +/-0.1dB
S/N: -119dB +/-1dB
THD+N: -120dB
DNR: 127dB
Headphone out:
Frequency Response: 20Hz~20KHz +/-0.1dB
THD+N: 0.0021% (16ohm load)
Output Level: 138mW(+4dB gain)
SNR: 93dB
PSSRR: >100dB
CMRR: 69dB
Dimension:
65W x 62L x 23H (mm)
Weight:
23g
Note: The Aoide DAC II sound card support Raspberry Pi 3B, 2B, B+, A+, Zero, and Zero W, but because of the Raspberry Pi capable limit, please use Raspberry Pi 3B or at least 2B if you want to work on 32Bit/384KHz.
Package Included:
1 x WINGONEER DAC II Sound card
7. Geekworm Raspberry Pi X400 V3.0 DAC+AMP Expansion Board Matching Aluminum Metal Case/Enclosure+Power Switch Kit for Raspberry Pi 3 B+/3 B
Feature
Match with X400 DAC HIFI Expansion Board and Raspberry Pi 3 Model B+ Plus/3B.Ultra-compact aluminum chassis, lightweight and durable, long-lasting stainless.
All ports and slots of the case can match with Raspberry Pi and X400 perfectly, Easy to change the Raspberry Pi OS SD card - No need to open the case.
Exhaust holes surface can reach perfect heat dissipation.
Equipped with 19mm metal latching power switch, aspberry Pi status LED, haluminum potentiometer Knob. Installation Guide, please refer to our wiki: www.raspberrypiwiki.com/index.php/X400_V3.0
Description
Note: The raspberry pi board and X400 board are both not included.[Packing List]
1 x X400 v3.0 enclosure
1 x Metal power switch
1 x Aluminum potentiometer Knob
4 x Screw M2.5 *28mm
6 x Screw M3 *6mm
1 x 1.5mm hex kety
[Overview]
This is a high quality aluminum metal enclosure that match with RPi and X400 perfectly. All ports and slots of the case can match with Raspberry Pi and X400 perfectly, with 19mm metal latching power switch and high quality solid aluminum potentiometer Knob, protect your pi well. For x400 V3.0 Expansion Board, please refer to: X400 Expansion Board.
[Features]
- Match with RPi and X400
- Ultra-compact aluminum chassis
- All ports and slots of the case can match with Raspberry Pi and X400 perfectly
- Exhaust holes surface can reach perfect heat dissipation
- Equipped with 19mm metal latching power switch
- Equipped with high quality solid aluminum potentiometer Knob
- Raspberry Pi status LEDs still visible
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Reinforced aluminum material, lightweight and durable, long-lasting stainless
- Weight: about 153g
8. NooElec NESDR SMArt HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for HF/UHF/VHF including RTL-SDR, Assembled Ham It Up Upconverter, Balun, Adapters & Cables
Feature
A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bandsThe NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks. This results in a vastly different HF experience--much better performance, and no loss of gain controls
Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure; an NESDR SMArt RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters
Proudly manufactured by NooElec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support availability. Please contact our support team any time if you have questions!
Amazon-exclusive bundle! Only available for a limited time
Description
For full product details and specifications, please visit the product page at nooelec.com
Included:
- Ham It Up v1.3 upconverter, assembled in black aluminum enclosure
- NESDR SMArt SDR bundle including custom antenna base w/ low-loss RG-58 cable & 3 antenna masts
- Balun One Nine antenna balun for longwire and dipole HF antennas
- Male SMA to male SMA pigtail cable, 15cm, w/ RG-316 cable
- Male SMA to male SMA barrel adapter
- Male SMA to female F-connector (US TV connector) adapter
- Male SMA to female Belling-Lee (EU TV connector) "PAL" adapter
Ham It Up Operation:
- Connect your antenna to the RF input
- Connect your SDR to the IF output
- Ensure your toggle switch is in the enable position
- Plug your USB power source into the USB-B USB jack
- Fire up your favorite SDR software. Tune to 125MHz + (+/- the tuning offset from the tuning procedure) + your desired frequency and enjoy!
9. WINGONEER WX400 Expansion Shield for Raspberry Pi B+/2B/3B, Highly Cost-Effective Audio Hat Which Fits on The GPIO of The Raspberry Pi Model B+, Raspberry Pi 2 Model B
Feature
WINGONEER WX400 Expansion Shield is a highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi Model B+, Raspberry Pi 2 Model B and Raspberry Pi 3 Model B.It uses i2S interface audio solution and supports 24-bit /192KHz high quality sound.
It is compatible with other audio equipment via RCA lotus socket.
It includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly.
Dimensions: 85 x 56mm (Same size as Raspberry Pi); Note: This is not original Raspberry product. It only a substitute accessories from WINGONEER, Know more instructions please contact us
Description
WINGONEER trademark Reg.NO:4747611Input Voltage
- 6V to 24Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi.
Audio
- Full-HD audio - up to 24-bit/192kHz playback.
- Class leading audio; 112db SNR, and THD of 0.0019%.
- Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122).
- Uses the digital I2S audio signals to reduce CPU load over USB audio solutions.
- Integrated hardware volume control.
- Mute can be enabled / disabled via jumper.
- Built in High quality audio headphone amplifier (TI TPA6133A).
- Earphone AMP can be enabled / disabled via jumper.
- Built in High quality Class-D stereo audio amplifier (TI TPA3118D2).
- Up to 2 * 20W into 4 ohm.
- AMP can be enabled / disabled via jumper.
- Phono/RCA connectors.
- 3.5mm stereo audio jack.
- Speaker terminals.
Wireless
- Built in IR sensor (38KHz).
Misc
- Power output socket.
- DIP switch to remove connection from RPi's pin header.
- Directly connected on top of the Raspberry Pi using the board GPIO header pins.
- No wiring nor soldering is required.
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards.
- Suitable for Raspberry Pi Model B+, Raspberry Pi 2 Model B and Raspberry Pi 3 Model B NEW!
Dimensions
- 85 * 56 mm (Same size as Raspberry Pi).
Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!
Packing included:
1x WINGONEER WX400 Expansion Board
4x Nylon Spacers (M3 * 20 mm)
8x Nylon Screws (M3 * 6 mm)
2x Jumper Wires
10. WINGONEER WX6000 Multifunction Expansion Shield 7.1 Channel Surround Audio Systems for Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Feature
Supports Operating System: OSMC - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound; Openelec - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound; Moode Audio Player - 2.0 stereo audio outputs; Raspbian Jessie - 2.0 stereo audio outputs ; Rune audio - 2.0 stereo audio outputs7.1 Channel audio systems; Four Sabre DACs ES9023; SPDIF digital audio; Four 3.5mm jack outputs; Home Theater Systems
Used four ESS Tech Sabre premier stereo DACs ES9023; ES9023 delivers jitter-free studio quality audio with 112dB DNR
Each DAC has independent ultra-low-jitter clock generator
High quality video performance; Supports SPDIF Optical Digital Audio; Supports HDMI high-bit-rate (HBR) audio
Description
WINGONEER trademark Reg.NO:4747611Key Features:
- Ideal for Home Theater Systems
- Ideal for 7.1 channel surround audio systems
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi
- Powers the Raspberry Pi - no additional power supply
Specification:
- Power supply: +5Vdc +/-5% (It is recommended to use the power adapter 5V 4A)
- DC Power Plug Size : 5.5*2.5mm
- Input Ports: 1 x HDMI
- Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
- Analog audio output level: 2V RMS
- Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
- DMI Audio Format: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby; Digital Plus Dolby TrueHD, and DTS-HD Master Audio
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm
Notes:
- WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after power apllied.
(The powerful HDMI audio processing chipset needs time to bootup)
Packing List:
1 x WINGONEER WX6000_7.1CH Expansion board
1 x HDMI bridge
Recent Comments