Looking for a hydroponic mister nozzle? Have a look at this 2022 guide!

When you want to find hydroponic mister nozzle, you may need to consider between many choices. Finding the best hydroponic mister nozzle is not an easy task. In this post, we create a very short list about top 10 the best hydroponic mister nozzle for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 hydroponic mister nozzle:

Best hydroponic mister nozzle

Product Features Editor's score Go to site
120 Pack YELLOW xGarden 360 Degree Micro Sprayer Fan Jet - For Hydroponic and Aeroponic Misters and Cloners 120 Pack YELLOW xGarden 360 Degree Micro Sprayer Fan Jet - For Hydroponic and Aeroponic Misters and Cloners
Go to amazon.com
Whitelotous 100pcs 180 Degree Refraction Autmizing Nozzle for Cloning Machine Hydroponic Garden Irrigation Whitelotous 100pcs 180 Degree Refraction Autmizing Nozzle for Cloning Machine Hydroponic Garden Irrigation
Go to amazon.com
Poity 360Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 25 Pieces Red Poity 360Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 25 Pieces Red
Go to amazon.com
BCHZ 25Pcs Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 180 BCHZ 25Pcs Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 180
Go to amazon.com
32 Pack Brass Misting Nozzles For Outdoor Cooling System, 0.012 Orifice (0.3 mm) 10/24 UNC By Aootech 32 Pack Brass Misting Nozzles For Outdoor Cooling System, 0.012 Orifice (0.3 mm) 10/24 UNC By Aootech
Go to amazon.com
LANDUM 360Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 25 Pieces Red LANDUM 360Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 25 Pieces Red
Go to amazon.com
LING'S SHOP Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 90/180/360 (25, Blue 90) LING'S SHOP Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 90/180/360 (25, Blue 90)
Go to amazon.com
60 Pack GREEN xGarden 360 Degree Micro Sprayer Fan Jet - For Hydroponic and Aeroponic Misters and Cloners 60 Pack GREEN xGarden 360 Degree Micro Sprayer Fan Jet - For Hydroponic and Aeroponic Misters and Cloners
Go to amazon.com
xGarden 60 Pack Blue 360 Degree Micro Sprayer Fan Jet - for Hydroponic and Aeroponic Misters and Cloners xGarden 60 Pack Blue 360 Degree Micro Sprayer Fan Jet - for Hydroponic and Aeroponic Misters and Cloners
Go to amazon.com
vanpower 180 Degree Micro Sprayer Fan Jet - Pack of 100Pcs (Green) vanpower 180 Degree Micro Sprayer Fan Jet - Pack of 100Pcs (Green)
Go to amazon.com
Related posts:

1. 120 Pack YELLOW xGarden 360 Degree Micro Sprayer Fan Jet - For Hydroponic and Aeroponic Misters and Cloners

Feature

120 pack Yellow Micro Sprayers with 360 Degree Fan Jet Spray Pattern
10-32 Thread (M5-0.8 Metric) - Dimensions 13/16" x 1/2" (20mm x 13mm)
31.4 GPH Flow Rate (at 20 PSI)
Easily Screw into 1/4" ID Tubing/Pipe or use 11/64 Drill Bit for precise hole
xGarden Brand - Buy from a brand you know and trust - xGarden products are exclusively distributed by Bywater Shops

Description

120 Pack of Yellow 360 degree micro sprayers. xGarden Brand. These can be used as replacement sprayers for most cloning systems or for DIY cloners, misters, or other hydroponic and aeroponic systems. Sprayers fit perfectly into 1/4" tubing with easy twist screw threads. Micro Sprayers operate at low pressure, and create an even fan of water for full circle coverage. When drilling holes for these micro sprayers, make sure to use a 11/64 bit for a perfect fit.

2. Whitelotous 100pcs 180 Degree Refraction Autmizing Nozzle for Cloning Machine Hydroponic Garden Irrigation

Feature

High precision machining, anti-aging, high temperature resistance.
It not easily deformed, reliable operation and long service life.
It can be used to replace damaged various spray head straight.
And used for DIY hydroponic / aeroponic / cloning machine syetem.
You can just connection the PVC / PPR /PE pipes. Not only greatly save the cost of spraying but also pretty good.

Description


Technical specifications:
Working pressure: 1.5-3.0 kg
Radius range: 0.9-1.1 m
Consumption: 33-55L / h
Additionally, the spray head angle of rotation: 180
Material: engineering plastic
Size: 1/2 "(13 mm) X 7/8" (22 mm)

Package Content:
100 X Nozzle

3. Poity 360Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 25 Pieces Red

Feature

ApplicationCan be used to replace various of damaged EZ clone spray head directly.
Advantage: Suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Special Design: Simply to install into PVC/PPR/PE pipe.
Quality Workmanship: Made of high quality plastic material, safe and durble
Package includes: 25 Pieces x Sprayer Nozzle Jet

Description


100% brand new and high quality
Material: Plastic
Color: Blue, Green, Red
High quality plastic (engineering-plastic), more durable-aging resistance;
High temperature resistance; deformation resistance; long serving life.
Can be used to replace various of damaged EZ clone spray head directly.
Used wide- suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Simply to install into PVC/PPR/PE pipe.
Connect: drill a 4mm hole and install it into
Flow rate: 30-69 L/H (liter/hour)
Recommended working pressure: 1-2 Bars (1 Bars= 14.5 Psi = 100000Pa)
Spray radius: 0.9-1.1m with recommended working pressure
Size:
Blue- Size(90spray head ): 1/2"(13mm) x 7/8"(22mm)
Green-Size(180spray head ): 1/2"(13mm) x 7/8"(22mm)
Red-Size(360spray head ): 1/2"(13mm) x 7/8"(22mm)
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

4. BCHZ 25Pcs Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 180

Feature

Simply to install into PVC/PPR/PE pipe.
High quality plastic (engineering-plastic), more durable-aging resistance.
High temperature resistance; deformation resistance; long serving life.
Used wide- suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Size(180spray head ): 1/2"(13mm) x 7/8"(22mm)

Description


Description:
100% brand new and high quality

High quality plastic (engineering-plastic), more durable-aging resistance.
High temperature resistance; deformation resistance; long serving life.
Can be used to replace various of damaged EZ clone spray head directly.
Used wide- suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Simply to install into PVC/PPR/PE pipe.

Material: Plastic
Color: Green
Connect: drill a 4mm hole and install it into
Flow rate: 30-69 L/H (liter/hour)
Recommended working pressure: 1-2 Bars (1 Bars= 14.5 Psi = 100000Pa)
Spray radius: 0.9-1.1m with recommended working pressure
Working Pressure:
1.5 BAR 31.7L/H
2.0 BAR 38L/H
2.5 BAR 40L/H
3 BAR 69L/H
Size(180spray head ): 1/2"(13mm) x 7/8"(22mm)

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
50Pcs Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 180

5. 32 Pack Brass Misting Nozzles For Outdoor Cooling System, 0.012 Orifice (0.3 mm) 10/24 UNC By Aootech

Feature

32PCS Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.
High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
Screw Into Any 10/24-Threaded Mist Nozzle Opening.
Operation Pressure:4-70kg/Cm (60-995 psi) Flow Rate:80-145l/Min (21-38GPM).
Minimal Water Use Of 1/2 GPH Per Nozzle.

Description

From The Manufacturer

This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place. Use of precision nozzle keypunch, sophisticated production, saving more than 10 times cost compared with the humidifier. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle. Nozzle can fully spray use the pressure of tap water.

The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.

A Filter on your mist system is highly recommended.

Plugged up Nozzles are not covered by any warranty.

WARNING

This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.

Included In The Package:

32 x Brass Misting Nozzles

6. LANDUM 360Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 25 Pieces Red

Feature

ApplicationCan be used to replace various of damaged EZ clone spray head directly.
Advantage: Suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Special Design: Simply to install into PVC/PPR/PE pipe.
Quality Workmanship: Made of high quality plastic material, safe and durble
Package includes: 25 Pieces x Sprayer Nozzle Jet

Description


100% brand new and high quality
Material: Plastic
Color: Blue, Green, Red
High quality plastic (engineering-plastic), more durable-aging resistance;
High temperature resistance; deformation resistance; long serving life.
Can be used to replace various of damaged EZ clone spray head directly.
Used wide- suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Simply to install into PVC/PPR/PE pipe.
Connect: drill a 4mm hole and install it into
Flow rate: 30-69 L/H (liter/hour)
Recommended working pressure: 1-2 Bars (1 Bars= 14.5 Psi = 100000Pa)
Spray radius: 0.9-1.1m with recommended working pressure
Size:
Blue- Size(90spray head ): 1/2"(13mm) x 7/8"(22mm)
Green-Size(180spray head ): 1/2"(13mm) x 7/8"(22mm)
Red-Size(360spray head ): 1/2"(13mm) x 7/8"(22mm)
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

7. LING'S SHOP Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 90/180/360 (25, Blue 90)

Feature

High quality plastic (engineering-plastic), more durable-aging resistance;
High temperature resistance; deformation resistance; long serving life.
Can be used to replace various of damaged EZ clone spray head directly.
Used wide- suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Simply to install into PVC/PPR/PE pipe.

Description

100% brand new and high quality

Features:
High quality plastic (engineering-plastic), more durable-aging resistance;
High temperature resistance; deformation resistance; long serving life.
Can be used to replace various of damaged EZ clone spray head directly.
Used wide- suitable for DIY Hydroponic/Aeroponic/cloning machine syetem; garden/lawn sprinkle system; flower/small tree/greenhouse watering system.
Simply to install into PVC/PPR/PE pipe.

Specification:
Material: Plastic
Color: Blue, Green, Red
Connect: drill a 4mm hole and install it into
Flow rate: 30-69 L/H (liter/hour)

Recommended working pressure: 1-2 Bars (1 Bars= 14.5 Psi = 100000Pa)
Spray radius: 0.9-1.1m with recommended working pressure

Blue- Size(90spray head ): 1/2"(13mm) x 7/8"(22mm)
Green-Size(180spray head ): 1/2"(13mm) x 7/8"(22mm)
Red-Size(360spray head ): 1/2"(13mm) x 7/8"(22mm)
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
25/50/100Pcs Sprayer Nozzle Jet Mister Cloning Machine Hydroponic 90/180/360

8. 60 Pack GREEN xGarden 360 Degree Micro Sprayer Fan Jet - For Hydroponic and Aeroponic Misters and Cloners

Feature

60 pack Green Micro Sprayers with 360 Degree Fan Jet Spray Pattern
10-32 Thread (M5-0.8 Metric) - Dimensions 13/16" x 1/2" (20mm x 13mm)
31.4 GPH Flow Rate (at 20 PSI)
Easily Screw into 1/4" ID Tubing/Pipe or use 11/64 Drill Bit for precise hole
xGarden Brand - Buy from a brand you know and trust - xGarden products are exclusively distributed by Bywater Shops

Description

60 Pack of Green 360 degree micro sprayers. xGarden Brand. These can be used as replacement sprayers for most cloning systems or for DIY cloners, misters, or other hydroponic and aeroponic systems. Sprayers fit perfectly into 1/4" tubing with easy twist screw threads. Micro Sprayers operate at low pressure, and create an even fan of water for full circle coverage. When drilling holes for these micro sprayers, make sure to use a 11/64 bit for a perfect fit.

9. xGarden 60 Pack Blue 360 Degree Micro Sprayer Fan Jet - for Hydroponic and Aeroponic Misters and Cloners

Feature

60 pack Blue Micro Sprayers with 360 Degree Fan Jet Spray Pattern
10-32 Thread (M5-0.8 Metric) - Dimensions 13/16" x 1/2" (20mm x 13mm)
31.4 GPH Flow Rate (at 20 PSI)
Easily Screw into 1/4" ID Tubing/Pipe or use 11/64 Drill Bit for precise hole
xGarden Brand - Buy from a brand you know and trust - xGarden products are exclusively distributed by Bywater Shops

Description

60 Pack of Blue 360 degree micro sprayers. xGarden Brand. These can be used as replacement sprayers for most cloning systems or for DIY cloners, misters, or other hydroponic and aeroponic systems. Sprayers fit perfectly into 1/4" tubing with easy twist screw threads. Micro Sprayers operate at low pressure, and create an even fan of water for full circle coverage. When drilling holes for these micro sprayers, make sure to use a 11/64 bit for a perfect fit.

10. vanpower 180 Degree Micro Sprayer Fan Jet - Pack of 100Pcs (Green)

Feature

High precision machining, anti-aging, high temperature resistance.
It not easily deformed, reliable operation and long service life.
It can be used to replace damaged various spray head straight.
And used for DIY hydroponic / aeroponic / cloning machine syetem.
You can just connection the PVC / PPR /PE pipes.

Description

Technical specifications:
Working pressure: 1.5-3.0 kg
Radius range: 0.9-1.1 m
Consumption: 33-55L / h
Additionally, the spray head angle of rotation: 180
Material: engineering plastic
Size: 1/2 "(13 mm) X 7/8" (22 mm)

Package included:
100X Nozzle

Conclusion

All above are our suggestions for hydroponic mister nozzle. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using hydroponic mister nozzle with us by comment in this post. Thank you!

You may also like...