How to buy the best h11 led decoder?
When you want to find h11 led decoder, you may need to consider between many choices. Finding the best h11 led decoder is not an easy task. In this post, we create a very short list about top 10 the best h11 led decoder for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 h11 led decoder:
Best h11 led decoder
1. AnyCar Led Headlight Decoder H11 H8 Canbus Resistor Anti-flicker Harness Headlight Bulb Decoder for LED Headlight Warning (H8/H9/H11/H16(JP))
Feature
Capacitor DecodersKOOMTOOM led headlight bulb decoders are capacitor decoders which transmit by pulse signal, much better than resistance decoder, it is environmental and engery saving;Powerful FunctionsSolves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting; FIX LED Headlight Lamp Out Message:Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC;
Easy InstallationAll-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 10-15 minutes;
Unsuitable Type of VehicleThese version of canbus decoders are not fit for: Mini, Volvo, Jeep Compass, Dodge, Lavida, BMW X1, Benz B Series, Chrysler PT Cruiser, DRL bulbs. (For fog light bulbs, we suggest this version: https://www.amazon.com/dp/B07L5LR5RV), If needed for these car models, please contact us for help before orders, thank you!
Kindly NoteCars are very complicated for the LED bulb upgrade,while we try to be as accurate as possbile with our listings,But still can not make 100% correct. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!
Description
Specifications:1. Model: H1 H3 H4 H7 H8 H9 H11 H10 9005 9006 HB3 HB4 9004 9007 H13 D1S D2S D3S D4S
2. Votage: DC12-24V
3. 2pcs/set
When will you need a decoder?
While you install led headlights into your car and meet the problems like the situation below, you may need a decoder.
(1) While you turn on the light after installation, the bulb keep flashing.
(2) Computer shows error of headlights.
(3) The bulb still keep lighting for a while although you have turned off the light.
(4) Lighting is every dimmed, not bright as normally.
Functions:
1. Fit to Germany cars which need electronic decoding.
There is a CANBus electronic inspect for the light while you turn on the engine of Germany cars, so it needs electronic decoding. And our decoder can offer this electronic decoding function. For some Germany cars, the system will also check the working power of the headlights bulbs after you turn it on. In this situation, you still need to add a resistor on the headlight bulbs to satisfy the demand of power.
2. Fit to pulse power supplied cars.
Pulse power supplied capacitance is a technology to reduce the heat value of halogen bulbs, make the lifespan be longer, and save more power on working. But led headlights need constant current supplied, not pulse power supplied this kind of intermittent power supply. So while you install the led headlights into the car with pulse power supplied device, the led headlight bulbs will keep flashing or flash and then lights off. In this situation, decoder will be a large capacitance and store up the electric on it and keep supply to the led headlights bulb current constantly. (If meet pulse power supplied problem, you can ask 4S store to revise your car into constant current supply too.)
3. A small electronic component for Toyota cars
There is a high beam signal light on Toyota cars, which will be turned on by a electronic component of in our decod
2. LED Conversion Kit Headlight Canbus Error Free Anti Flicker Capacitors Resistor Wiring Harness Decoder-H8 H9 H11 (pack of 2)
Feature
1. LED Anti flicker capacitors only apply to LED headlight, can't work with DRL, compatible for 90% vehicle with CANBUS systems, can't work on some models of Jeep, Mini cooper,Toyota and Volkswagen Golf etc. We can not guarantee it works for all car models. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!2. Socket Type: H8/H9/H11, Voltage: DC 9V-16V, 4A MAX Current. Package size: 18cm x 14cm x 4cm(7inch x 5.5inch x 1.6inch)
3. Easy and Simple installation-- Usually takes less than 20 minutes! "Plug-and-Play" in most vehicles, no other parts needed
4. Fix error code or flashing issues related to the low current draw when using LED bulbs upgrading the halogen bulbs, it can solves the problem of OBC warning error code, or bulb rejection, hyper flashing, no flashing or burnt out bulb indications and prevent error message and canbus error on vehicles
5. 100% QUALITY GUARANTEE, Your satisfaction is our TOP priority. 90-day warranty of money back or simply a replacement
Description
H8/H9/H11 LED Anti flikcer Warning Cancellers
Specification:
Socket Type: H8/H9/H11
Voltage: DC 9V-16V
4A MAX Current
Material: PVC
Weight: 0.15kg(0.33lb)
Package size: 18cm x 14cm x 4cm(7inch x 5.5inch x 1.6inch).
Package Included:
2 pcs of H8/H9/H11 canbus wiring harness adapter
NOTE: Not cutting or splicing! Simply twist your LED bulb onto the base, and twist the other end into your existing bulb socket. Unlike complex installation of 50W 6-Ohm load resistors.
This cable fits for CARS WITH COMPUTER CONTROLLED HEADLIGHTS,
Function:
1.Fixes error code or flashing issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.
2. It can solves the problem of OBC warning error code, or bulb rejection, hyper flashing, no flashing or burnt out bulb indications and prevent error message and canbus error on vehicles.
3. Suitable for all cars that have computer controlled headlights.
3. H11 LED Headlight Bulb Conversion Kit 10000LM Super Bright 6000K H11 Low Beam/Fog Light Bulb H8 H9 LED Light Bulbs Canbus Decoder
Feature
300% BRIGHTER: H11 LED headlight bulb 10000LM/ 70W/ 6000K xenon white light,300% brighter than halogen bulbs; 12V H11(H8 H9) LED fog bulb, lower than 10KV HID headlight bulb. Safer driving in overcast/fog/rain.BETTER PATTERN: H8 LED headlight conversion kit have 12pcs CSP chips and the thinnest 2MM Tube, ensure perfect low beam pattern without any dark spots or shadowed areas, and no blind oncoming drivers or passerby.
PLUG & PLAY: H9 small bulb body fits most cars with CanBus decoder,like chevy silverado, camry, no alarming no flicker, no damage LED headlight cover. You can finish it in ten minutes.
KIND NOTE: Try switching polar ends if H11 LED bulbs no lighting. Amazon fitment system may not be 100% accurate, contact us with vehicle's brand/model/year in Customer questions & answers, answered in 8 hours.
SUPER LONG LIFESPAN: Two-way dissipation (turbo cooling fan and all aviation aluminum body) guarantee 50000 hours lifespan, even longer than your car. 3 years warranty and lifetime support. Buy with confidence, no hassle on return or exchange.
Description
PLUG & PLAY.H11 (H9 H8) LED headlight bulb 10000LM, 300% brighter than halogen Canbus-ready, easy installation, fits most cars, no alarming no flicker no dark spot.
Specifications:
Bulb Type: H11 H8 H9
Luminous Flux (pair): 10000LM, 300% brighter than halogen
Long lifespan: 50000 hours, even longer than your car life
Power (pair): 70W 6000K cool white light
LED Chip ( pair): 12pcs x CSP chips
Operating Voltage: DC 9V-32V/ 1-3A
Material: aviation 6063 aluminum
Operating Temperature: -40+150
IP Rate: IP67 waterproof
Installation steps:
1, Rotate and take of the base
2, Open the back cover
3, Set the base into the bulb's seat and keep firmly
4, Install the LED headlight bulb by rotating into base
5, Cover with the lid
For Some vehicle, like Audi, BMW, Jeep, GMC, Dodge, Mercedes-Bens may need extra decoder(warning canceller), please noted and contact with us if not sure.
Package:
2pcs H11 LED Headlight bulbs
2pcs plastic zip ties
1pcs unique gift box
1pcs manual
1pcs gift card
Warranty:
Warranty 3 years + lifetime support
TRUELAND present a clearer path, and return a real world to you
The 5th generation technology of TRUELAND, makes the volume smaller, non-destructive installation, and a wide range of adjustable angles for more models. Zero-delayed start-up allows your car to enjoy real white brightness immediately.
Trueland, true road, true world, true life.
4. HIKARI PAIR LED Conversion Kit Headlight Canbus Error Free Anti Flickering Resistor Decoder - H11
Feature
HIKARI resistor for H11 headlight bulbs.2005+dodge,ram, ford f-150,chevy,kia and jeep may requires these h11 resistors in order to aviod flicker problem..
We advise the customer to install the led headlight bulbs first and then check the vehicle for any flicker problems.
5. Xprite H8, H9, H11 LED Headlight Canbus Wiring Kits Warning Error Free Anti Flicker Harness Resistor Canceler Decoder (Pair)
Feature
One Pair of Xprite H8, H9, H11 CANBUS Wiring Harness AdaptersSolves most vehicles power issue from upgrading to LED headlight bulbs
Stops flickering and cancels CANBUS error warnings
Work with After Market LED Headlight Kits: H8, H9, H11
Simple installation, no modifications needed
Description
Fixes error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.It will solve the problem of OBC warning error code, or bulb rejection, hyper flashing, no flashing or burnt out bulb indications and Prevent error message and canbus error on vehicles.
Xprite CANBUS decoder can solve the following problems:
The indicator of the instrument panel lights when the headlight is used as Fault Light.
The indicator of the instrument panel doesn't light when the headlight is used as High Beam.
The LED head lights flash when starting the engine.
The engine stops working when turning on the LED head lights.
Error warning. LED head lights don't light.
LED head lights keep flashing after installation.
One of the LED head lights, but the other one doesn't light.
LED head lights automatically turn off after lighting up for few minutes.
6. Auxbeam H8/H11 LED Conversion Kit Error Free Wiring Harness Adapter
Feature
Attention: Please check your headlight bulb and vehicle correct plug size before purchase our adapter. It is not compatible for Mini Cooper2 Pcs of H8/H9/H11 canbus wiring harness adapter, for H11 headlight bulbs, Voltage: DC 12V-14V,4A MAX Current, Apply to headlight and fog light.
Solve the problems caused by low current draw when use LED bulb upgrade halogen bulb
Perfect solution for detect the LED headlight failure/bulb rejection, hyper flashing,no flashing or burnt out bulb indications etc
Prevent OBC warning error code,canbus error on specific vehicles
Description
Introduction:
2x H8/H9/H11 canbus wiring harness adapter
Solve the problems caused by low current draw when use LED bulb upgrade halogen bulb
Perfect solution for detect the LED headlight failure/bulb rejection,hyper flashing,no flashing or burnt out bulb indications etc
Prevent OBC warning error code,canbus error on specific vehicles
Technical Specification:
Socket Type: H8/H11
Voltage: DC 12V-14V
4A MAX Current
Usage: Headlight, fog light
Package Included: 2x H8/H11 canbus wiring harness adapter
7. SOCAL-LED 2x A10 H11 H8 EMC Headlight Kit CANBUS HID LED Decoder Anti-Flicker Error Canceller Relay Resistor Adapter
Feature
Genuine Can-Bus decoder, eliminated error code on dash for 90% of the cars.Cancel error message cause by On-Board Computer 'bulb out' or 'bulb failure' warnings error.
Pre-wired for direct plug and play, bypass wiring like regular load resistors. Plug one end to the light bulb and the other end to the car socket; if bulb would not turn on at first, flip the plug 180 degree (reverse polarity) to the car socket and it should works.
Work with most After Market HID Kit or LED Headlight Kits, this decoder can solve 90% auto headlight issue, so please confirm your bulb size at OSRAM Sylvania or Philips websites or contact with the seller. There are various complex headlight compatibility reasons, but we will keep on researching and upgrading the decoder to solve more auto headlight issue. Make sure that the positive and negative sign are match from the light bulb to the decoder.
Disclaimer: Even this decoder size is compatible for your vehicles, yet we can not guarantee it fixes all problems as car system differs from one to another. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!
Description
Why need LED Decoder? When a HID or LED kit is installed in newer car models or cars with a computer controlled unit CAN BUS, often there is a error code showing on the dash board or the HID lights keep flickering and would not stay on. This is due to the fact that the HID or LED kit is triggering a bulb out warning signal in your car's computer control unit.
Where our LED Headlight Bulbs Stand Out:
Latest technology Hybird EMC works for both HID and LED Conversion Kits, strong canbus chip built-in compatible even with the new car computer System. Our decoder is designed to balances out the current draw of the LED kit and would offset the warning signals on the dash board. It will also eliminate headlight flickering that is caused by the Vehicle's computer not recognizing the low wattage LED bulb.
True Plug-N-Play: Easy to install, ture Plug-n-Play AMP connectors.
Fitment:
1) Please double check the size of the bulb with your car before purchase. The amazon bulb fitment guide will tell you if these fit your vehicle However! It will not tell you if its for fog, low beam or high beam.
2) Please check your car Owner's Manual.
3) We Suggest you to use Sylvania or Philips automotive lamp replacement guide online to ensure you purchase the right size bulb.
Notice!
Cars known to require this are: Chrysler 300C, Dodge Magnum, Dodge Charger and some Audi, BMW, and Mercedes Benz (usually late models only).
8. RCP -SUCAS-H11- LED Headlight Canbus LED Compatibility Decoder Anti-Flicker Error Canceller Relay Resistor Adapter (Upgraded Version)
Feature
1) Genuine Can-Bus decoder, eliminated error code on dash for 99% of the cars.2) Easy Installation: All-in-One Design, Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 5-10 minutes.
3) Fix: Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC. It's used to H11 bulb.
4) Advanced generation, more stable and reliable, can solve vehicles Stops flickering and cancels CANBUS error warnings. Work with most After Market HID Kit or LED Headlight Kits, this decoder can solve 99% auto headlight issue.
5) Package includes:2pcs Canbus System Decoder
Description
Why need LED Decoder? When a HID or LED kit is installed in newer car models or cars with a computer controlled unit CAN BUS, often there is a error code showing on the dash board or the HID lights keep flickering and would not stay on. This is due to the fact that the HID or LED kit is triggering a bulb out warning signal in your car's computer control unit.Where our LED Headlight Bulbs Stand Out: Latest technology Hybird EMC works for both HID and LED Conversion Kits, strong canbus chip built-in compatible even with the new car computer System. Our decoder is designed to balances out the current draw of the LED kit and would offset the warning signals on the dash board. It will also eliminate headlight flickering that is caused by the Vehicle's computer not recognizing the low wattage LED bulb.
True Plug-N-Play: Easy to install, ture Plug-n-Play AMP connectors.
Features:
--- Directly plug and play, easy installation,
--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight.
--- Permanently resolve the annoying LED headlight flickering problem
--- Includes 2 pieces H11 decoder per order.
9. O-NEX LED Resistor Kit H11 (H8, H9) Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller
Feature
Heavy Duty Relay Harness.50W 6 ohm Resistor Canbus Anti-Flicker.
Solve Error code, flickering, random shut off.
Works with both HID & LED Bulbs.
Easy Plug-N-Play Setup.
Description
HID LED Load Resisotr Kit
This item is for one Set (2 Pieces) HID Relay harness adapter with Resisotors. This Resistor kit is can be used for both HID or LED Bulbs. It has easy plug and play pre-wire socket with error bypass load resistors.
This relay wiring kit solve computer error warning encountered during the installation. It also help the following problems: One light out in cold weather and where trouble is experienced with Auto-on systems. Eliminate HID Bulb Flickering cause by vehicle's computer not recognizing low wattage HID kit. Fix random shut-offs, and works for many DRL (Daytime running light) systems.
Features & Specs:
- Heavy Duty Relay Harness.
- 50W 6 ohm Resistor Canbus Anti-Flicker.
- Solve Error code, flickering, random shut off
- Works with both HID & LED Bulbs
- Easy to install, just plug and play
- High Quality Guaranteed
- Input Voltage: DC 12V
Warning - Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.
Warranty
1-Year-Limited warranty period from the date of the purchase. Warranty does not cover?breakage from water damage, fire, acts of nature, misuse, abuse, modification, improper installation, or any modification to the item.
10. HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2PCS
Feature
2PCS 50W 6ohm led load resistor for headlight bulb fog lamp turn signal light daytime running light to solve common turn signal problems associated with LED bulb upgrades.To Solve "bulb out signal" / "OBC error message" after installing SMD LED light bulb and fast turn signal blinking response after installing SMD LED light bulb
Resistors get hot when they are operating. We recommend that they be mounted on metal in a safe location away from important wiring
Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed
Simulates traditional filament bulbs to eliminate error indications for hyper-flash (quick blinking) or burnt out bulb
Description
Feature-- One pair H11 6 Ohm 50W LED load resistors for LED error fix or anti-flicker;aluminium shell; excellent heat dissipation. one LED resistor is required for each bulb
-- This relay wiring kit solve computer error warning encountered during the installation. It also help the following problems:
One light out in cold weather and where trouble is experienced with Auto-on systems.
Eliminate HID Bulb Flickering cause by vehicle's computer not recognizing low wattage HID kit. Fix random shut-offs, and works for many DRL (Daytime running light) systems
-- Fix LED headlight lamp out message: bulb flashing or flickering / cancels radio interference and light turning off when engine starts / cancels error message by OBC -- Eliminates error message on dashboard, and prevents flickering and strobe light effect / Connects to both sides of vehicle, each with its own heavy-duty resistor for maximum performance
-- Applicable to Magotan BMW Mercedes ect to install on headlight (high or low beam) / fog light / daytime running light (DRL) with H8/H9/H11 socket
Description:
Can be used with vehicle turn signal light's LED conversion
Fit forH8 H11 H9 880 881 socket
Resistor Type: 50W 6Ohm led ligt load resistor wiring harness
Voltage: 12V
Directly plug and play, easy installation
NOTE
Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.
Recent Comments