Expert choice for amp splitter pedal

When you want to find amp splitter pedal, you may need to consider between many choices. Finding the best amp splitter pedal is not an easy task. In this post, we create a very short list about top 10 the best amp splitter pedal for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 amp splitter pedal:

Best amp splitter pedal

Product	Features	Editor's score	Go to site
	JHS Buffered Splitter Guitar Signal Path Effect		Go to amazon.com
	ZT Amplifiers Pedal Power Cable Kit with 9V Splitter for Lunchbox Junior Amp, 10'		Go to amazon.com
	New Hand made ABY Guitar pedal Switch Box A/B Combiner Footswitch TRUE BYPASS Amp / guitar AB		Go to amazon.com
	Tom'sline Engineering Pedals Power Supply APW-6 9 Isolated 9V/12V/18V 100mA/1A Outputs for Pedals Amps Keyboards 7 Cables 1 Reverse Polarity 1 Daisy Chain Global Power Adapter		Go to amazon.com
	BOSS Metal Dual Footswitch, AC-powered (FS-7)		Go to amazon.com
	Lehle P-Split II Passive High Impedance Splitter		Go to amazon.com
	Mr.Power Electric Guitar Plug Keychain Amp Effects Pedal Speaker Jam Jack Key Ring Audio Cable Connector Plug-in Hole Musical Gift 2 Pcs (2 Gold)		Go to amazon.com
	T POWER 9V ((UL LISTED)) Ac Dc Adapter Charger W/ 4~8 Way Daisy Chain Splitter Cord Cable For Guitar Effect Pedal / (fits ZOOM Roland Behringer Boss Digitech Jim Dunlop Ditto Looper PolyTune & MORE		Go to amazon.com
	Friedman Amplification BE-OD Deluxe Dual Overdrive Guitar Effects Pedal		Go to amazon.com
	AIHIKO 3.5mm (1/8 Inch) Mini Jack TRS Stereo MalePlug to Dual XLR Male Y Splitter Patch Breakout Cable, 6 Feet		Go to amazon.com

1. JHS Buffered Splitter Guitar Signal Path Effect

Feature

Simple and effective signal-splitting device that keeps your tone clear, powerful, and pristine
Send one signal to a tuner that is out of the signal chain while retaining your full tone
In a dual-amp setup, both amplifiers will see a powerful, clean signal
Bassists can send one side to their amplifiers, while sending the other to the board
Converts your guitar's hi-Z signal to lo-Z for driving long cables and pedal chains
Retains the original tone of your guitar without coloration from the other gear in your signal chain
The small size is ideal for saving pedalboard space, and it can easily be mounted underneath your board

Description

There are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If youve ever split your guitars signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.

2. ZT Amplifiers Pedal Power Cable Kit with 9V Splitter for Lunchbox Junior Amp, 10'

Feature

Connect and power your effects pedal from the ZT Lunchbox Junior Amp
Included add-on Y-Splitter allows you to connect up to two pedals
Single 9V Cable: 10 ft (305cm) long. 2.1mm x 5.5mm plug (male) on both ends
9V Splitter: 1 ft (30cm) between each plug/jack. Single 2.1mm x 5.5mm jack (female) to two 2.1mm x 5.5mm plug (male)

Description

The ZT Amplifiers Pedal Power Cable Kit is a single cable and add-on Y-splitter that allows you to power up to two pedals from the Lunchbox Junior Amp. Simply connect the cable to the 9V output on the Lunchbox Junior Amp.

3. New Hand made ABY Guitar pedal Switch Box A/B Combiner Footswitch TRUE BYPASS Amp / guitar AB

Feature

Diecast Aluminium Casing
Sturdy Switch for foot use.
Route one signal to two outputs or two inputs to one output Choose A, B or A & B combined
3 LED's show you which signal is active
True bypass, All our pedals are tested using a live setup with guitars, effects and tube amplifiers.

Description

The ABY footswitch can be used to solve any number of complex audio switching problems.

Use it to switch one input signal to either or both outputs, or it can also be used in the opposite direction.

Route one signal to two outputs or two inputs to one output.

Then choose A, B or A & B combined. LED's show you which signal is active. One 9 volt battery is required for LED indication.

4. Tom'sline Engineering Pedals Power Supply APW-6 9 Isolated 9V/12V/18V 100mA/1A Outputs for Pedals Amps Keyboards 7 Cables 1 Reverse Polarity 1 Daisy Chain Global Power Adapter

Feature

ENJOY THE QUIET AND CLEAN SOUND. The pedal power supply keeps all your pedals in the loop quiet and clean, thanks to that the chip inside smartly divide each current output and each output is isolated.
BIG POWER OUTPUT. Except some 100mA outputs, the pedal power offers up to 1A current output to each 9V, 12V and 18V, which are good for types of pedals, keyboards, and some low current draw amps.
SOLID BUILT TO LAST AND SLIM TO SAVE YOUR ROOM. The brick all is made from tough aluminum alloy. Slim size 6.3*2*1 inch only, which saves big room on your pedal board; and the light weight keeps your whole board weight balance.
ALWAYS KEEP YOUR PEDALS SAFE. Smart chip inside to prevent short circuit, or over current draw. Each output jack is isolated. The pedal power supply always keep your pedals in the loop safe.
MOST PRACTICAL FOR POWERING UP. 7 single power cables included. 5-jack daisy chain and a reverse polarity cable included make pedal powering much more diversity. 4 international power adapter heads included let your traveling the world around anytime.

Description

Tom'sline Engineering brand have been designing and manufacturing kinds of pedals and accessories for years. The pedal power series feature an innovative, safe, intelligent, and up-to-date technology adapted creature. The current power series includes normal power bank with multi current split and voltage separate, inputing power directly from a power adapter; and a new generation of power rechargeable power bank for pedals and smart phones.

Overall Features
Slim design, dimension only 6.3x2x1inch
Tough enclosure, all aluminum alloy case for strong protection
Safe intelligent IC inside, to prevent short circuit or protect over current

Multi Uses
Different current and voltage outputs. 5 outputs 9V 100mA, 1 output 9V 1A, 2 outputs 12V 1A, 1 output 18V.
Multi use. Available for all types of pedals, keyboards, or even some amps with the same voltage and current demand from the outputs.
Isolated output channels. No interface influence among each outputs. Quite power support.

Many Power Cables
Many power cables included for many grouping options to power your pedals. 7 pieces of single power cables, 1 piece of 5-head daisy chain, 1 piece of power polarity reverse cable are included.

International Use Options
Power adapter heads changeable. 4 different types of power adapter heads included - UK, US, Europe, and Australia

Easy Use
Clear Input and Outputs indicators to make your experience easy and comfortable.

5. BOSS Metal Dual Footswitch, AC-powered (FS-7)

Feature

Dual footswitch in a small footprint
Latch/momentary switching function (common to A and B)
Durable steel chassis
Battery-free operation ideal for pedal boards
Power via 9v adapter (power splitter included)
Operates as momentary switch with no power (LEDs will not illuminate without AC power)

Description

FS-7 is a compact dual footswitch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.

6. Lehle P-Split II Passive High Impedance Splitter

Feature

Gold plated relays and switches
Patented LHTZ high-end transformer
Phase reverse and ground switches
Made in Germany

Description

The P-split makes it possible to route an instrument to two amplifiers simultaneously with no noise or hum. The patented LHTZ high-end transformer is specially designed to cleanly split both low and high impedance signals, making the P-plit a perfect passive DI box as well.

7. Mr.Power Electric Guitar Plug Keychain Amp Effects Pedal Speaker Jam Jack Key Ring Audio Cable Connector Plug-in Hole Musical Gift 2 Pcs (2 Gold)

Feature

Color : Gold
Weight: 50g
Size: 12cm / 4.7inch
Jack size : 6.35 mm
A great gift for musicians, music lovers and music enthusiasts

Description

A great gift for musicians, music lovers and music enthusiasts
Material: Metal
Color : Gold
Weight: 50 g
Size : 12cm / 4.7inch
Jack size : 6.35 mm

Packaged:
2 x guitar Audio plug keychains

8. T POWER 9V ((UL LISTED)) Ac Dc Adapter Charger W/ 4~8 Way Daisy Chain Splitter Cord Cable For Guitar Effect Pedal / (fits ZOOM Roland Behringer Boss Digitech Jim Dunlop Ditto Looper PolyTune & MORE

Feature

T-Power Made with Brand-new, Input: AC 100V - 240V / Output : 9VDC // T-Power Made with the highest quality (( Extra Long 6.6ft cable cord )) Total Cord Length Is Extended to 6.6 ft // Brand-new Input Volt Range: 100-240V ( 9vdc ) // w/ Tip Size:5.5mm/2.1mm, inner negative center tip 4 ~ 8Way Daisy Chain Splitter Cord Cable
T POWER - products are SAFETY / UL LISTED: Tested, Approved and Certified by UL , CE, FCC, RoHS // T-POWER 8 way power cable adapter for use with electric guitar multiple effect pedals. High quality daisy chain with special anti-hum. Power chain DC cables specially designed for guitar players who want to power few pedals at the same time with only one adaptor or one outlet (fits ZOOM Roland Behringer Boss Digitech Jim Dunlop Ditto Looper PolyTune Donner Dyna Compressor Board & MORE
compatible with : BEHRINGER PSU-SB / Boss PSA-120S PSB-120 (same as PSB-1U, ?ACB-120, ACF-120, ACK-120) / Fishman 910R Pedals and Outboard Preamps / Truetone?1?Spot Adapter (Boss PSA, Boss ACA, DOD PS-200R, Morley 9V, Danelectro DA-1, Dunlop ECB-003, Ibanez AC109, Zoom AD-0006Jim Dunlop ECB003US Dunlop ECB-03 AD-0920 AC Adapter ( ECB-03 / ECB03 / ECB003 / ECB-003 ) Mr.Power Guitar Effect Pedals / Donner DPA-1?Pedal Power Supply Adapter 9V DC 1A Tip Negative EC838 / Planet Waves PW-CT-9V
MXR M133 Micro Amp, M102 Dyna Comp Compressor, MXR M109 6-Band Graphic EQ / Donner Dt-1?Chromatic Guitar Tuner Pedal True Bypass / Donner Yellow Fall Vintage Pure Analog Delay Guitar Effect Pedal True Bypass / TC Electronic Guitar Ditto Looper Effects Pedal, TC Electronic Polytune 2 Pedal Tuner, TC Electronic Hall of Fame Reverb Pedal
Boss RC-1 Loop Station, TU3 Chromatic Tuner Pedal , BOSS Audio DS1 Distortion Guitar Pedal / Boss ME-25, ME-50, ME-70, ME-80, DS-1, DD-20, GT-10, HM-2, RC-3, RC-30, RV-5, RV-6, TU-3, VE-20, SD-1 Pedal ME-25, ME-80, ME-20B ,ME-50B CE-5, CH-1, CS-3, GT-100, GT-10B,DS-1,FZ-2 FZ-3 FZ-5 HYPER FUZZ / Zoom G1Xon Guitar Effects Pedal with Expression Pedal / BEHRINGER VINTAGE TUBE OVERDRIVE TO800, Behringer CS400 Compressor Sustainer Ultimate Dynamics Effects Pedal, TU300 ,ULTRA VIBRATO KLIQ TinyTune

Description

T POWER - products are SAFETY / UL LISTED: Tested, Approved and Certified by UL , CE, FCC, RoHS
( 9V DC 1A (1000mA) ) w/ Tip Size:5.5mm/2.1mm, inner negative center tip 8 Way Daisy Chain Splitter Cord Cable

T-POWER 8 way power cable adapter for use with electric guitar multiple effect pedals. High quality daisy chain with special anti-hum. Power chain DC cables specially designed for guitar players who want to power few pedals at the same time with only one adaptor or one outlet from the power supply. (fits ZOOM Roland Behringer Boss Digitech Jim Dunlop Ditto Looper PolyTune Donner Dyna Comp Compressor Board & MORE ) Negative Tip

compatible with :

BEHRINGER PSU-SB / Boss PSA-120S PSB-120 (same as PSB-1U, ACB-120, ACF-120, ACK-120) / Fishman 910R Pedals and Outboard Preamps / Truetone 1 Spot Adapter (Boss PSA, Boss ACA, DOD PS-200R, Morley 9V, Danelectro DA-1, Dunlop ECB-003, Ibanez AC109, Zoom AD-0006Jim Dunlop ECB003US Dunlop ECB-03 AD-0920 AC Adapter ( ECB-03 / ECB03 / ECB003 / ECB-003 ) Mr.Power Guitar Effect Pedals / Donner DPA-1 Pedal Power Supply Adapter 9V DC 1A Tip Negative EC838 / Planet Waves PW-CT-9V

MXR M133 Micro Amp, M102 Dyna Comp Compressor, MXR M109 6-Band Graphic EQ / Donner Dt-1 Chromatic Guitar Tuner Pedal True Bypass / Donner Yellow Fall Vintage Pure Analog Delay Guitar Effect Pedal True Bypass / TC Electronic Guitar Ditto Looper Effects Pedal, TC Electronic Polytune 2 Pedal Tuner, TC Electronic Hall of Fame Reverb Pedal
Boss RC-1?Loop Station, Boss TU3 Chromatic Tuner Pedal , BOSS Audio DS1 Distortion Guitar Pedal / Boss ME-25, ME-50, ME-70, ME-80, DS-1, DD-20, GT-10, HM-2, RC-3, RC-30, RV-5, RV-6, TU-3, VE-20, SD-1 Pedal / Zoom G1Xon Guitar Effects Pedal with Expression Pedal / BEHRINGER VINTAGE TUBE OVERDRIVE TO800, Behringer CS400 Compressor Sustainer Ultimate Dynamics Effects Pedal, TU300

9. Friedman Amplification BE-OD Deluxe Dual Overdrive Guitar Effects Pedal

Feature

Authentic British Overdrive Tones based on the Legendary "BE-100" tube head
Dual Channels with Volume, Gain, Bass, Middle, Treble and Presence
Three Position Tight Switch (per channel)
Includes Splitter Cable for 18V Operation (connect to power supply via 2 x 9V isolated outputs)
True Bypass Switching; Powered by 9V-18VDC; Assembled in USA

Description

This "BE" dual overdrive pedal captures the tone of the now legendary Friedman BE-100 amplifier, which has graced the stages of world class musicians the world over. The original Friedman BE-OD single channel pedal took the industry by storm. Tens of thousands of pedals sold worldwide and it's still going strong! This new BE-OD Deluxe pedal employs the exact same circuit but adds another channel and dual midrange controls. The top row (Channel 1) is identical to the original BE-OD pedal while Dave voiced the bottom row (Channel 2) with slightly lower gain. Dual "BE" channels in your arsenal allow you to perfectly set both your rhythm and lead sounds. The BE-OD Deluxe delivers authentic tube amplifier sound with the controls needed to shape your tone. Controls include: 3 position tight switch, volume, gain, bass, middle, treble and presence knobs. These responsive controls will take you from mild overdrives to straight up gain nirvana. Built in the USA and designed to withstand decades of abuse, the BE-OD Deluxe is a must have pedal for any tone enthusiast.

10. AIHIKO 3.5mm (1/8 Inch) Mini Jack TRS Stereo MalePlug to Dual XLR Male Y Splitter Patch Breakout Cable, 6 Feet

Feature

Solid Connection: 24k Gold plated metal connectors with strong interior soldering points ensures firm connection with any instruments, microphone pedal and amp jack.
Tangle-free: Super durable and flexible PVC material prevents twisting, kinking and tangling. Easy to be packed and disassembled.
High Fidelity: 23AWG Oxygen-free copper core with very low capacitance provides superior signal conductivity and enhanced sound. High-density OFC 99% PVC shield with flexible rubber insulation avoids handling noise and noise interference.
Wide Applications: AIHIKO microphone cord are designed to split a 3.5mm (1/8 inch)unbalanced stereo signal into two unbalanced mono XLR signals left and right channels. Work with any devices with standard 3.5mm aux Jack to XLR female, such as iPad, iPhone, iPod, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc.
Lifetime Warranty: Precisely machined and carefully hand assembled, AIHIKO cables are made for years and years of reliable performance. We are so confident in their durability. Please feel free to contact us if you have any questions during use.

Description

Thanks to a powerful chuck-type strain relief and a rugged tweed outer jacket, this cable will stand up to considerable abuse on stage, while delivering the pristine signal clarity that's critical for recording.
Despite multiple layers of shielding and insulation put in place for maximum noise isolation, this instrument cable's construction remains very flexible, doesn't get tangled, and is easy to coil at the end of your gig.
Precisely machined and carefully hand assembled, AIHIKO audio cables are made for years and years of reliable performance. We are so confident in their durability. Lifetime Warranty.

Specification:
1.1/8 Male to Dual XLR Male.
2.Only 38 Picofarads Per Foot.
3.Serviceable gold plated connectors.
4.23AWG Oxygen-Free Copper Conductors.
5.Ultra low capacitance levels for superior tone.
6.Durable PVC Jacket with molded strain relief.
7.Flexible cable construction prevents twisting, kinking and tangling.
8.Triple shielding with 100% coverage for maximum EMI, RFI, and handling noise rejection.
9.Zinc alloy and dual layer nylon braid protect the cable from harsh installation where the cable is tugged across sharp edges.

Package:
AIHIKO 3.5 mm TRS to Dual XLR Pro Stereo Audio Cable * 1

Conclusion

All above are our suggestions for amp splitter pedal. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using amp splitter pedal with us by comment in this post. Thank you!