Top uniqantiq hardware supply mortise for 2024
Finding the best uniqantiq hardware supply mortise suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best uniqantiq hardware supply mortise
1. Solid Brass Skeleton Key w/Double Notched Bit - for House Doors with Mortise Locks | KY-30 (1)
Feature
The skeleton key is made of forged brass.This door key replacement can be used as a master key for antique mortise and rim architectural locks.
Overall length: 3 1/8 Bit is: 3/8 X 3/8
The package contains one skeleton key.
Skeleton keys are truly trial and error. Please check barrel and bit dimensions before purchasing the door key.
2. Right Hand Cabinet Door or Drawer Brass Half Mortise Lock w/Two Skeleton Keys | S-20R
Feature
High quality antique reproduction half mortise lock set. Easy to instal.This two position keyhole allows lock to be used for a drawer or right door.
Overall Size: 3" High x 1 1/2" Wide x 3/8" Thick.
5/8" from center of pin to tongue edge 1 5/16" from center of pin to bottom edge of lock.
The package contains one lock, two skeleton keys and mounting hardware.
3. Full Mortise Cabinet Door or Drawer Lock w/Plate and Skeleton Key - Antique Furniture Hardware | S-15S
Feature
A high-quality reproduction of antique furniture lock. The lock is made of steelThis is a full mortise furniture lock can be used in old furniture. This lock can be used for drawers and right hand doors
Overall Size: 1 7/16" High x 1" Wide
Pin is centered 11/16" down from top of lock
The package contains one lock with plate and key (KY-3AB).
4. Small Brass Half Mortise Chest or Box Lock w/Skeleton Key | S-8
Feature
A high-quality reproduction of antique furniture lock. The lock body is made of polished brass and steel.This lock can be used for lap desks, jewelry boxes, game boxes or any box with a hinged lid.
Overall Size: 1 1/2" Wide x 1" Deep x 3/8" Thick.
3/4" from center of pin to lock face 3/4" from center of pin to left edge of lock.
The package contains one lock, one catch plate, one key.
5. Medium Brass Half Mortise Chest or Box Lock w/Skeleton Key | S-9 (with One Key)
Feature
A high-quality reproduction of antique furniture lock. The lock body is made of polished brass and steelThis lock can be used for lap desks, jewelry boxes, game boxes or any box with a hinged lid
Overall Size: 2" Wide x 1 1/4" Deep x 7/16" Thick
1" from center of pin to lock face 1" from center of pin to left edge of lock
The package contains one lock, one catch plate, one key.
6. Rounded Full Mortise Lock w/Two Skeleton Keys for Roll Top Desk - Antique Furniture Hardware | LRT-6
Feature
High quality antique reproduction lock. Easy to instalThis is a rounded full mortise lock that can be used for restoration antique and modern roll top desks
Lock Plate: 3 3/8" Long x 11/16" Tall
Lock Body: 1 13/16" Wide x 1 1/2" High Receiver: 2 3/4" Long x 1" Tall
The package contains one lock, one striker plate, mounting hardware and two skeleton keys
7. Full Mortise Antique Gold Plated Jewelry Box & Small Door Lock with Key & Keyhole Vintage Furniture | K40-B361-1
Feature
High quality antique reproduction small full mortise furniture lock. Easy to instalThis lock will perfect fit for small box, humidors, music boxes and jewelry boxes
Lock (.275" x 1.22" x .708") Box plate Gold Plated (2 x 3/8) Lid plate Gold Plated (2 x 3/8)
The package contains lock, key, lids, keyhole escutcheon, two short screws, four long screws
8. UNIQANTIQ HARDWARE SUPPLY Brass Butler Tray Hinge - Pack of 2 - Table, Desk Top Furniture Hardware | H-10
9. Large Brass Half Mortise Chest or Box Lid Lock w/Two Skeleton Keys | S-7E
Feature
A high-quality reproduction of antique furniture lock. The lock body is made of polished brassThis lock can be used on old strong box or vintage chest
Overall Size: 3 1/2" Wide x 2 1/4" Deep x 5/8" Thick 1 1/4" from center of pin to lock face 1 3/4" from center of pin to left edge of lock
The package contains one lock, catch plate and two skeleton keys.
10. Small Brass Half Mortise Chest or Box Lock w/Skeleton Key | S-8 (with Two Keys)
Feature
A high-quality reproduction of antique furniture lock. The lock body is made of polished brass and steel.This lock can be used for lap desks, jewelry boxes, game boxes or any box with a hinged lid.
Overall Size: 1 1/2" Wide x 1" Deep x 3/8" Thick.
3/4" from center of pin to lock face 3/4" from center of pin to left edge of lock.
The package contains one lock, one catch plate, one key.
11. 2" x 11/16" Non-Mortise Nickel Chrome Plated Hinge | 10 Pairs/Pack | Cabinet, Cupboard Doors Furniture Hardware | H14-H529ANP (10)
Feature
These non-mortise hinges are made of steel with nickel chrome finish.This hinges are perfect for use on cabinets, cupboards, boxes and other vintage and new furniture around a house.
Overall size: 2" x 11/16" (51 mm x 17 mm)
Centers: 1-5/8" and 3/4"Knuckle Projection: 1/4"Hinge Projection: 1/16"
The package contains 10 pairs (20pc) of hinges without mounting hardware.
12. Oil Rubbed Bronze Plated Butterfly Hinge | 10 Pairs/Pack | Cabinet, Cupboard Door Furniture Hardware | HB-92ORB (10)
Feature
Overall size: 2 1/4" Wide x 2" High Each Wing: 1 1/4"These cabinet butterfly hinges are made of steel with applied bronze plated finish.
Package contains ten pairs (20pc) of hinges and mounting screws.
These hinges can be used for building or restoration such furniture as cabinets, cupboards, boxes
Our decorative butterfly hinges are good application for kitchen or bathroom cabinets
13. 2" x 11/16" Non-Mortise Antique Brass Plated Hinges | 10 Pairs/Pack | Cabinet, Cupboard Doors Furniture Hardware | H13-H529AAB
Feature
These non-mortise hinges are made of steel with applied antique brass finish.Butterfly non mortise hinges are perfect for use on cabinets, cupboards, boxes and other vintage and new furniture.
Overall Size: 2" x 11/16" (51 mm x 17 mm)
Centers: 1-5/8" and 3/4"Knuckle Projection: 1/4"Hinge Projection: 1/16"
The package contains ten pairs (20 pc) of hinges without mounting screws.
14. 2" x 11/16" Non-Mortise Bright Brass Plated Hinges | 10 Pairs/Pack | Cabinet, Cupboard Furniture Hardware | H11-H529ABP
Feature
These non-mortise hinges are made of steel with applied bright brass finish.Butterfly non mortise hinges is perfect for use on cabinets, cupboards, boxes and other vintage and new furniture.
Overall size: 2" x 7/8" (51 mm x 22 mm).
Centers: 1-5/8" and 3/4"Knuckle Projection: 1/4"Hinge Projection: 1/16"
The package contains ten pairs of hinges (20pc) without mounting hardware.
15. Full Mortise Lock w/Skeleton Key | 3- Way Mounting for Dresser Drawer or Cabinet Door | Antique, Vintage, Old Furniture Hardware | M-1831
Feature
High-quality reproduction of antique furniture lock. The lock is made of steelThis is a full mortise furniture lock that can be used for right and left hand doors or drawers
Lock Body: 1-1/2"high x 1-15/16"wide x 3/8"thickBrass Lock Face Plate: 7/16"wide x 3"long
Distance from Face Plate Surface to Center of Pins: 13/16" Distance from Sides to Center of Pins: 1/2"
The package contains one lock and one skeleton key.
16. Rounded Half Mortise Lock w/Skeleton Key for Left Hand Cabinet Doors | L-20L
Feature
A high-quality reproduction of antique furniture lock. The lock is made of steelThis rounded half mortise lock is perfect for use in left hand doors on cabinets, curios and buffets
Overall Size: 1 3/4" Wide x 1 9/16" High
The package contains one lock, mounting hardware and one key (KY-6)
This replacement lock is easy to install and can be used for old furniture restoration or building new projects
17. Right Hand Cabinet Door or Dresser Drawer Brass Plated Half Mortise Lock w/Skeleton Key | M-1841
Feature
High quality antique reproduction half mortise lock set. Easy to instal.This two position keyhole allows lock to be used for a drawer or right hand door.
Overall Size: 1-5/8"high x 2-1/2"wide Pin Center to Strike Plate: 13/16".
The package contains one lock, two skeleton keys and mounting hardware.
The lock is made of Steel with Brass Plated Mounting Plate.
18. Matte Chrome Butterfly Cabinet Hinge 2-3/16" x 2-3/8" - 1 Pair | H14-546BMCRM
Feature
Centers: 5/8" and 1-1/16" Pin Length : 1-3/4" Total Width:2-3/8" Total Length:2-3/16".These cabinet butterfly hinges are made of steel with applied matte chrome finish.
The package contains one pair of butt hinges without mounting screws.
These hinges can be used for building or restoration such furniture as cabinets, cupboards, boxes
Our decorative butterfly hinges are good application for kitchen or bathroom cabinets
19. Non Mortise Antique Copper Hinge with Finals 2-1/2" - 2 Pc/Pack Vintage Cabinet Furniture Reproduction Hardware | H16-H531AC-2-5 (1)
Feature
Premium quality non-mortise hinges. Made of steel with antique copper finish.This premium quality non-mortise hinges very easy to instal and will add vintage feel to any decor. Can be used for restore old furniture or add vintage feel to new cabinets, cupboards or other furniture around a house.
Overall size: 2-1/2" x 3/4" (51 mm x 17.5 mm).
Package contains one pair of hinges.
Recent Comments