Best throttle body jeep 4.0
If you looking for throttle body jeep 4.0 then you are right place. We are searching for the best throttle body jeep 4.0 on the market and analyze these products to provide you the best choice.
Best throttle body jeep 4.0
1. BBK 1724 62mm Throttle Body - High Flow Power Plus Series for Jeep 4.0L
Feature
BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and BuiltHigh Flow Power Plus Series 62mm Throttle Body Increases Airflow to Improve Horsepower and Throttle Response Over Stock
Recommended For Vehicles Where Modifications Have Been Made or are Planned Especially Cold Air Intakes and Exhaust
All New CNC Machined Casting Assembled with Components that Exceed OEM Standards, They Will Offer Years of Trouble Free Performance
Simple Direct Bolt on Replacement for Factory Unit with Simple Hand Tools in Less Than Half an Hour
Description
BBK Power Plus 62 millimeter Throttle Body for Jeep 4.0L for all BBK 1991-2003 Jeep 4.0L throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on the vehicle and application. All BBK performance power plus series throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies the number one in performance and quality.2. 1068 Throttle Body Spacer Only for Select Years: Jeep XJ, Comanche MJ WJ, Grand Cherokee ZJ, Wrangler TJ 4WD,fits models with 4.0L/ 2.5L engines only fits 4-bolt throttle Bodies.
Feature
Easy bolt-on installation.; improved torque performance.; increased fuel economy.Only fits models with 4.0L/ 2.5L engines.; only fits 4-bolt throttle Bodies.; not for use in California pending air Resource board exemption
1997-2006 4WD Jeep TJ Wrangler; 2004-2006 4WD Jeep TJ Wrangler Unlimited; 1987-1995 4WD Jeep YJ Wrangler; 1984-2001 4WD/2WD Jeep XJ Cherokee; 1986-1993 4WD/2WD Jeep MJ Comanche; 4.0L/ 2.5L engines
Kit contents: throttle body spacer; gaskets; linkage Spacers; hardware
Est. Install time: 1-2 hours; sku: 1068
Description
New throttle body spacer helps you get the most out of your Jeep YJ, TJ or XJ. Engineered with a spiraling helix design, our durable, aluminum spacer forces incoming air into a high velocity Vortex that aids in a more powerful and efficient fuel combustion process. This process offers improved torque performance and increased fuel economy. Best of All, this modification is easy to install using a 100% bolt-on installation process that can be attached in no time Installation. Installation Instructions 1. Remove the hose from the center of the intake tube 2. Using a flat head screwdriver loosen the hose clamps on both ends of the intake and then remove. See the photo 1 and 2. 3. Unplug the wire plug from the throttle body for added clearance to remove the throttle body. See the photo 3. 4. Remove the two bolt holding with throttle cable mount with a 10mm socket. See Photo 1 Unplug wire on throttle body. 5. Remove the four bolts from the throttle body with a 10mm socket. Carefully pull up on the throttle body making sure you do not drop anything into the intake. See the photo 4 and 5. 6 Remove all the old gasket and clean the mounting surface on the intake and bottom of the throte body.See the photo 6. 7. Place the new gasket, throttle body spacer and 2nd new gasket on top of the intake. See Photo 7 and 8. 8. Using the 4 supplied 6mm x 50mm bolts and washers, bolt the throte to the intake on top of the spacer and gaskets. Tighten with a 10mm socket. See Photo 9. 9. Place the correct number of linkage spacers under the throttle cable linkage bracket and insert the supplied 10mm x 40mm bolts and washers. Tighten with a 10mm socket.See Photo 10. 10.Plug the wire back into the throttle body. 11. Reinstall the intake tube and tighten the hose clamps with a flat head screwdriver. 12. Plug the hose back into the center of the intake tube.3. Airaid 310-510 PowerAid Throttle Body Spacer
Feature
Installs in minutes with simple hand toolsComes with all required hardware for a clean installation
Improves low-end torque and throttle response
Backed by a "no hassle" lifetime warranty
Description
The Airaid PowerAid Throttle Body Spacer is developed to enhance off-idle torque, from 800 RPM to approximately 3,000 RPM. It incorporates a patented helix bore, which causes a spinning action of the incoming air-charge as it passes through the throttle body spacer. This improved air-charge carries all the way into the combustion chamber, producing a super-atomized mixture, which produces tremendous gains in mid-range power and overall combustion efficiency for better fuel economy.4. Rough Country 1068 Rough Country-1068-Throttle Body Spacer for Select Years: Jeep Cherokee XJ, Comanche MJ, Grand Cherokee WJ, Grand Cherokee ZJ, Wrangler TJ 4WD
Feature
Easy bolt-on installation.; improved torque performance.; increased fuel economy.Only fits models with 4.0L/ 2.5L engines.; only fits 4-bolt throttle Bodies.; not for use in California pending air Resource board exemption
1997-2006 4WD Jeep TJ Wrangler; 2004-2006 4WD Jeep TJ Wrangler Unlimited; 1987-1995 4WD Jeep YJ Wrangler; 1984-2001 4WD/2WD Jeep XJ Cherokee; 1986-1993 4WD/2WD Jeep MJ Comanche; 4.0L/ 2.5L engines
Kit contents: throttle body spacer; gaskets; linkage Spacers; hardware
Est. Install time: 1-2 hours; sku: 1068
Description
Rough Country new throttle body spacer helps you get the most out of your Jeep YJ, TJ or XJ. Engineered with a spiraling helix design, our durable, aluminum spacer forces incoming air into a high velocity Vortex that aids in a more powerful and efficient fuel combustion process. This process offers improved torque performance and increased fuel economy. Best of All, this modification is easy to install using a 100% bolt-on installation process that can be attached in no time5. MotorWest Performance - TS104-Jeep Throttle Body Spacer Smooth Bore 4.0L 2.5L
Feature
Our spacers are machined in-house at our Canoga Park, CA location. Not a cheap casting (with uneven surfaces) or Chinese import product.1987-2001 Jeep Cherokee I6 4.0L - 1991-2000 Cherokee I4 2.5L
92-95 Jeep Wrangler I6 4.0L - 91-95 Wrangler I4 2.5L
91-92 Comanche I4 2.5L - 87-92 Comanche I6 4.0L
1997-2002 Jeep TJ I4 2.5L - 1997-2006 TJ I6 4.0L
Description
Smooth bore throttle body spacer increases plenum air volume, adding performance through out all RPM range. This translates into increased torque and horsepower. The spacer improves fuel / air mixture for increased throttle response and overall performance. Our spacers are machined in-house at our Canoga Park, CA location. Not a cheap casting (with uneven surfaces) or Chinese import product. 100% billet CNC machined in the USA. Spacers are machined out of high quality 6061-T6511 and anodized for a finish that not only looks great, but protects the bare aluminum from the elements for years to come. What's included in the box? 1 Throttle Body Spacer 2 Throttle Body gaskets 7 Extended bolts 7 Bolt washers6. Blue Throttle Body Spacer Fit Jeep Grand Cherokee WJ XJ Wrangler YJ 2.5 4.0L All
Feature
Billet AluminumDescription
Blue Throttle Body Spacer Fit Jeep Grand Cherokee WJ XJ Wrangler YJ 2.5 4.0L All, 1991-2002 Jeep Cherokee XJ (2.5L and 4.0L), 1991-1995 Jeep Wrangler YJ (2.5L or 4.0L), 1997-2002 Jeep Wrangler TJ 2.5L Engine, 1997-2006 Jeep Wrangler TJ 4.0L Engine, 1993-2004 Jeep Grand Cherokee WJ (4.0L)7. Thermal Throttle Body Gasket For Dakota Jeep Grand Cherokee Wrangler 2.5L 4.0L
Feature
Direct Replacement for OEM Gasket3mm Thermal Polymer Throttle Body Gasket
Protects against heat soak and reduces incoming air temperature before it reaches to Intake Manifold.
Description
Thermal Throttle Body Gasket For Dakota Jeep Grand Cherokee Wrangler 2.5L 4.0L8. Volant 728640 Vortice Throttle Body Spacer
Feature
1999-2004 Jeep Grand Cherokee 4.0L V61991-2001 Jeep Cherokee 4.0L V6
1987-1995 Jeep Wrangler YJ 4.0L V6
Description
VORTICE THROTTLE BODY SPACER.9. BBK 04-06 Jeep 4.0 62mm Throttle Body BBK Power Plus Series (17240)
Feature
Power-Plus Series Throttle Body Includes All Required Gaskets & Hardware No Tune RequiredSize:62mm
Recent Comments