Best static tape clear for 2024
Finding your suitable static tape clear is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best static tape clear including detail information and customer reviews. Let’s find out which is your favorite one.
Best static tape clear
![3M 40 Clear Static Control Tape - 3/4 in Width x 2.2 mil Thick - 46505 [PRICE is per ROLL]](https://images-na.ssl-images-amazon.com/images/I/41n1Xd2kcCL.jpg)
![3M 40PR Clear Static Control Tape - 3/4 in Width x 2.2 mil Thick - 47778 [PRICE is per ROLL]](https://images-na.ssl-images-amazon.com/images/I/51R761-9aTL.jpg)
1. Patco 5560/CLR336 5560 Removable Protective Film Tape: 3" x 36 yd, Clear
Feature
Carrier/backing: low density polyethylene (ldpe) film. Adhesive: acrylicThickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier). elongation: 500 percent
Adhesion: 12 ounces per inch (to stainless steel test panel)
Tensile strength: 12 pounds per inch (longitudinal)
Service/operating temperature: -40F to 190F. Application temperature: 50F to 120F
Description
Patco 5560 Removable Protective Film Tape is a clean removal tape which combines a durable and conformable polyethylene film backing with a moderate tack, low adhesion acrylic adhesive which will not leave residue or damage most surfaces. it is used for general protective masking applications on plastics, glass, and metal that require temporary surface protection through assembly or shipping. Patco 5560 is highly conformable; abrasion, moisture and solvent resistant; and removes cleanly and easily. This tape offers moderate tack which allows it to stay adhered during a shipping process, yet since it offers low adhesion (slightly less than that of a blue painters tape) it should still remove cleanly. Please note Patco 5560 is the same product as Patco 5540 - the different numbers were used to help Patco differentiate between the auto glass retention market (5540) and the general surface protection market (5560). Also note that this product is not a static-cling-only type tape like the discontinued 3M 2112C was. Also this tape is not crystal clear like a book repair tape; it is more transparent to translucent and is designed so end users can easily identify the tape in order to remove it. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.Technical InformationCore: 3 inch diameterBacking/Carrier: low density polyethylene (LDPE) filmAdhesive: acrylicThickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier)Adhesion: 12 ounces per inch (to stainless steel test panel) Tensile Strength: 12 pounds per inch (longitudinal) Application.2. Patco 5560 Removable Protective Film Tape: 2 in. x 36 yds. (Clear)
Feature
Carrier/Backing: low density polyethylene (LDPE) film. Adhesive: acrylic.Thickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier) . Elongation: 500%.
Adhesion: 12 ounces per inch (to stainless steel test panel)
Tensile Strength: 12 pounds per inch (longitudinal)
Service/Operating Temperature: -40F to 190F. Application Temperature: 50F to 120F.
Description
Patco 5560 Removable Protective Film Tape is a clean removal tape which combines a durable and conformable polyethylene film backing with a moderate tack, low adhesion acrylic adhesive which will not leave residue or damage most surfaces. it is used for general protective masking applications on plastics, glass, and metal that require temporary surface protection through assembly or shipping. Patco 5560 is highly conformable; abrasion, moisture and solvent resistant; and removes cleanly and easily. This tape offers moderate tack which allows it to stay adhered during a shipping process, yet since it offers low adhesion (slightly less than that of a blue painters tape) it should still remove cleanly. Please note Patco 5560 is the same product as Patco 5540 - the different numbers were used to help Patco differentiate between the auto glass retention market (5540) and the general surface protection market (5560). Also note that this product is not a static-cling-only type tape like the discontinued 3M 2112C was. Also this tape is not crystal clear like a book repair tape; it is more transparent to translucent and is designed so end users can easily identify the tape in order to remove it.
If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.Technical Information
Core: 3 inch diameterBacking/Carrier: low density polyethylene (LDPE) film
Adhesive: acrylic
Thickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier)
Adhesion: 12 ounces per inch (to stainless steel test panel)
Tensile Strength: 12 pounds per inch (longitudinal)
Application
3. ABN Clear Plastic Sheeting, 99 in/po x 90 ft/pi x 0.35 Mil Paint Overspray Transparent Protective Masking Film Roll
Feature
Practical: Use the ABN Clear Plastic Sheeting, 99 in/po x 90 ft/pi x 0.35 Mil - Paint Overspray Transparent Protective Masking Film Roll to protect any surface you need to work onVersatile: Protect walls, trim/baseboards, fixtures, vehicles, cabinets, countertops, furniture, windows, doors, and floors from paint and overspray; For vehicle and watercraft painting jobs in the body shop or at home (use for super sharp lines on general purpose automotive spray-on bedline applications), protecting any equipment, covering glass, home paint and renovation protection, and completing many more jobs or crafts
Easy to Use: Pre-taped painter's plastic roll (tape and plastic combined in one product); Easy to apply and readjust with no masking tool required; Simply cut the masking film with a pair of scissors or razor
Size: 99 in/po x 90 ft/pi (251cm x 27m); Unfolds to 99 in/po to protect against accidental paint splatters and drips; Can protect both small and large surfaces from overspray
Durable: Lightweight and tear resistant with integrated static cling to keep it in one place and ensure complete surface protection; 0.35 Mil thickness; Overspray protection stops bleed-through and is resistant to solvents
Description
Combine two steps of masking into one with the ABN Clear Plastic Sheeting, 99 in/po x 90 ft/pi x 0.35 Mil - Paint Overspray Transparent Protective Masking Film Roll. When you need to protect the surface you're working on, use this roll for vehicle paint jobs, protecting equipment and environment, and more. Simply pull the desired length from the roll and use a scissors or razor to cut. The static cling makes it conform to the application material for quick cutting and long use. The 0.35 Mil thickness is a thin plastic sheet that allows for easy tear-free application and simple cleanup. The 8.25' x 90' (2.5m x 27m) overall size makes masking large areas or an entire car simple and fast. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.4. StaticTek Conductive Tape Anti Static High Temperature Resistant Grid Cellophane ESD Tape, 3/4 Inch X 118 Feet - 3" Core - Pack of 16
Feature
GROUND PROTECTION GRID TAPE: Our proprietary three-layer tape provides non-sparking surfaces on both the inside and the outside.DURABLE ESD TAPE: A conductive grid is buried between two static dissipating copolymer substrates that will not shed, crack, chip or rub off.
TEMPERATURE RESISTANT TAPES: The maximum temperature the tapes can withstand is 140F
ESD AWARENESS: ESD symbol is embedded in the tape for visual alert
CERTIFIED ESD PRODUCT: Meets ANSI ESD-S20.20 specifications. Surface resistivity of 10^3 - 10^4 Ohms/Sq.
Description
An anti-static heat resistant conductive grid tape - Best solution to meet your overall adhesive needs in a variety of applications.StaticTek Conductive Grid Tape provides superior ESD protection at a great value! These tapes are designed to be used in an ESD sensitive environment that requires EMI Shielding. These conductive tapes have a conductive grid buried between two static dissipating copolymer material. They ensure reliable protection for any sensitive device that might be damaged by normal insulating tapes. The conductive grid layer has a surface resistivity of 10^3 - 10^4 Ohms/Sq.
ESD Tapes of highest standards in different sizes
The StaticTek conductive grid adhesive tape provides a nonsparking, static-dissipative surface on both sides of the tape for packaging that requires EMI (electromagnetic interference) shielding or ESD (electrostatic discharge) control. Our tape is embedded with ESD symbols for visual alert. It will not generate voltage when unrolled with a grounded tape dispenser. The tape can withstand temperatures up to 140 degrees F. And the tape meets American National Standards Institute (ANSI) ESD-S20.20 standards. StaticTek Static Free Grid Cellophane Tapes are also available in different sizes: 3" core - 1/2", 3/4", 1" and 2" width by 36 meters in length.
5. Greenstar Clear Transfer Application Tape High Tack Layflat USCutter 12in x 100yd roll
Feature
12in x 100yd Clear with High Tack AdvesiveTape that Offers Static-free Application
Makes Registration of Multiple Vinyl Colors and Layers Simple
Works Great in Either Wet or Dry Applications
Made in the USA
Description
GreenStar Layflat Clear Transfer Tape - High Tack - Assorted WidthsGreenStar Layflat Clear Transfer Tape - Designed with the professional sign shop in mind, at a price that an entry-level user can appreciate! USCutter has always been pleased to have introduced a clear transfer tape that offers static-free application. This makes registration of multiple vinyl colors and layers simple. It has a rigid film liner that will keep your graphics laying flat until you are ready to apply them. This film has a High Tack Adhesive. It works great in either wet or dry applications. The unique surface can even be marked with a pen or a pencil! Try it...we are sure that you will love this application tape! Available in 100 yard rolls, assorted widths. Made in USA!
Note: USCutter does not recommend using High Tack transfer tape with GreenStar vinyls. For best results, a medium tack tape is preferred.
6. 3M 40 Clear Static Control Tape - 3/4 in Width x 2.2 mil Thick - 46505 [PRICE is per ROLL]
Feature
Sale Unit: ROLLBrand: 3M
3M Number: 40
Backing Material: Polyester
Adhesive Presence: Single-Sided
Description
3M 40 clear static control tape comes in a 3/4 in width, 36 yd length, uses a conductive polymer adhesive and is packaged 10 rolls per case. Can be used to a maximum temperature of +266 F. This product is a single-sided adhesive static control tape. When purchasing this product, consider the thickness. The variances in thickness often make an important difference in proper performance. This static control tape has a 2.2 mil thickness.7. 3M 40PR Clear Static Control Tape - 3/4 in Width x 2.2 mil Thick - 47778 [PRICE is per ROLL]
Feature
Sale Unit: ROLLBrand: 3M
3M Number: 40PR
Backing Material: Polyester
Adhesive Presence: Single-Sided
Description
3M 40PR clear static control tape comes in a 3/4 in width, 72 yd length, uses a conductive polymer adhesive and is packaged 10 rolls per case. Can be used to a maximum temperature of +266 F. This product is a single-sided adhesive static control tape. When purchasing this product, consider the thickness. The variances in thickness often make an important difference in proper performance. This static control tape has a 2.2 mil thickness.8. Patco 5560/CLR436 5560 Removable Protective Film Tape: 4" x 36 yd, Clear
Feature
Carrier/backing: low density polyethylene (ldpe) film. Adhesive: acrylicThickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier). elongation: 500 percent
Adhesion: 12 ounces per inch (to stainless steel test panel)
Tensile strength: 12 pounds per inch (longitudinal)
Service/operating temperature: -40F to 190F. Application temperature: 50F to 120F
Description
Patco 5560 Removable Protective Film Tape is a clean removal tape which combines a durable and conformable polyethylene film backing with a moderate tack, low adhesion acrylic adhesive which will not leave residue or damage most surfaces. it is used for general protective masking applications on plastics, glass, and metal that require temporary surface protection through assembly or shipping. Patco 5560 is highly conformable; abrasion, moisture and solvent resistant; and removes cleanly and easily. This tape offers moderate tack which allows it to stay adhered during a shipping process, yet since it offers low adhesion (slightly less than that of a blue painters tape) it should still remove cleanly. Please note Patco 5560 is the same product as Patco 5540 - the different numbers were used to help Patco differentiate between the auto glass retention market (5540) and the general surface protection market (5560). Also note that this product is not a static-cling-only type tape like the discontinued 3M 2112C was. Also this tape is not crystal clear like a book repair tape; it is more transparent to translucent and is designed so end users can easily identify the tape in order to remove it. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.Technical InformationCore: 3 inch diameterBacking/Carrier: low density polyethylene (LDPE) filmAdhesive: acrylicThickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier)Adhesion: 12 ounces per inch (to stainless steel test panel) Tensile Strength: 12 pounds per inch (longitudinal) Application.9. Intertape Polymer Group HMF48 Hand Masking Film, 48-Inch x 180-Feet, Clear
Feature
Static cling film for easy use and protectionSolvent resistant
Clings to surface, preventing overspray
Pre-folded for ease of application
Durable film resists tearing
Description
Stain resistant, temperature resistant, static treated film that 'clings' to surfaces for secure protection. Hand-Mask provides the flexibility and bleed through resistance of film yet holds paint and gel-coat like paper. Prevents overspray and resists paint flaking. The top edge is reinforced to allow for easy dispensing/positioning of the film without tearing before extending the folded film to the desired length.10. Pre-Taped Masking Film Tape Poly Surface Painting Protection Cover Auto Painting Tape Adhesive Paint Masking Film2 Pack 1.8 feet X 65 Feet
Feature
Adhesive paint masking film is strong and flexible vinyl masking film and clear masking film, Measures 65-Feet length by various width by 0.5-mil thicknessPre-taped poly mask film and taped painting film is perfect protection for use in areas where straight lines are needed
Adhesive foam masking Tape is applied along one edge of high-density masking film, Flake taped masking film for multi-coat paint applications
Use to protect surfaces and contain dust, Home depot, Drop cloth, Car painting protection film, paint mask, sheet mask, spray paint mask
Lightweight & tear resistant with integrated static cling to ensure complete surface protection
Recent Comments