Best lowering springs mitsubishi
If you looking for lowering springs mitsubishi then you are right place. We are searching for the best lowering springs mitsubishi on the market and analyze these products to provide you the best choice.
Best lowering springs mitsubishi
1. Tein SKE20-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer
Feature
Front spring rate: 3.8 kilogram/millimeter (212 pound/inch)Rear spring rate: 2.5 kilogram/millimeter (162 pound/inch)
Front ride height (may vary with vehicles that share the same fitment): -45 millimeter (-1.8 inch)
Rear ride height (may vary with various vehicles that share the same fitment): -37 millimeter (-1.5 inch)
Progressive spring rate design
Description
Tein S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5mm, and be clear of any manufacturer defects. Additional features: Chrome Vanadium SAE9254V construction, Progressive spring rate design, Includes silencer rubber on certain applications, Green Powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5mm sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting.) Contents of Spring Kit: Individual springs x 4, main spring x 4, some applications include Tein silencer rubbers, warranty Information and bump stop reference guide, and 2 Tein decals.2. DNA Motoring For Mitsubishi Lancer ES 4-Door Shock Absorbers (Black)+Lowering Spring (Blue)
Feature
Reduce the Effect of Traveling Over Rough GroundLowers the Center of Gravity to Improve Performance and Increases Stability
Reduces Squat During Acceleration, Body Roll at Corners and Excessive Nose-Dive Under Braking
Improves Handling, Responses and Balance
Lowering Rate: Front - 1.5" and Rear - 1.5" / Spring Rate: Front - 255 lbs/in and Rear - 155 lbs/in
Description
Shock Absorber:A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and convert kinetic energy to another form of energy. It is used in conjunction with cushions and springs. An automobile shock absorber contains spring-loaded check valves and orifices to control the flow of oil through an internal piston.
One design consideration, when designing or choosing a shock absorber, is where that energy will go. In most shock absorbers, energy is converted to heat inside the viscous fluid. In hydraulic cylinders, the hydraulic fluid heats up, while in air cylinders, the hot air is usually exhausted to the atmosphere. In other types of shock absorbers, such as electromagnetic types, the dissipated energy can be stored and used later. Shock absorbers help cushion vehicles on uneven roads.
Lowering Spring:
The chassis of a street vehicle is designed to be built at a minimum cost; thus, suits only average drivers. As tuners we are anything but average. We know what we want from a vehicle. We want immediate response, reduced body roll, increased stability and enhanced cornering ability. Lowering springs are the basis of achieving those characteristics in our street machines. By lowering the center of gravity, a vehicle will be able to turn harder while reducing body roll. A lower ride height also gives the vehicle a more aggressive look.
Package Included:
Compatible with:
Notes:
3. Mitsubishi Eclipse 4G Suspension Racing Coil Drop Lower Lowering Sport Spring Kit Red
Feature
Manufacturer Part Number: LS-015RD-AMA-L1Fitment: 2006-2012 Mitsubishi Eclipse
Quantity: 2 Front / 2 Rear Springs
Surface Finish: Red
Specifics: Will Require Wheel Alignment After Installation
Description
4. For Mitsubishi Lancer Suspension Lowering Spring (Black) - CS9W
Feature
Improves handling, responses and balanceLowers the center of gravity to improve performance and increases stability
Reduces squat during acceleration, body roll at corners and excessive nose-dive under braking
Constructed of SAE 9254 chromed cold wounded steel and powder-coated silicon color polished finish for maximum durability
Drop Rate - FRONT: 1.50", REAR: 1.50"
Description
The chassis of a street vehicle is designed to be built at a minimum cost; thus, suits only average drivers. As tuners we are anything but average. We know what we want from a vehicle. We want immediate response, reduced body roll, increased stability and enhanced cornering ability. Lowering springs are the basis of achieving those characteristics in our street machines. By lowering the center of gravity, a vehicle will be able to turn harder while reducing body roll. A lower ride height also gives the vehicle a more aggressive look.Package Included:
Compatible with:
5. Fit 2000-2005 Mitsubishi Eclipse Suspension Lowering Spring Blue (L4 Drop Front - 2.5" / Rear - 2.6") (V6 Drop Front -1.7" / Rear -1.5")
Feature
Fit: 2000-2005 Mitsubishi EclipseWork with oem and aftermarket struts or shocks.
Approx: (L4 Drop Front - 2.5" / Rear - 2.6") (V6 Drop Front -1.7" / Rear -1.5")
Includes: 2 front and 2 rear springs
No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation
Description
Improves your car look and performance with our exstensive line of sport springs. These springs are specially designed for each vehicle model and year and helps lower your car while not sacrificing street performance. By upgrading to sport lowering springs, you can lower car and shorten strut or shock stroke making the car more stable in high speeds, when shortning stroke will also improve cornering, stability and helps dramtically improving stability during fast turns.Please note when upgrading to performance spring we highly recommend upgrading, replacing struts orshocks to get best performance and handling, not doing so on blown out struts or shocks will cause bouncy ride and poor ride due to stiffer spring rate.
- 100% Brand new item
- Includes:2 front and 2 rear springs
- Approx: (L4 Drop Front - 2.5" / Rear - 2.6") (V6 Drop Front -1.7" / Rear -1.5")
- Work with oem and aftermarket struts or shocks.
- Enhance cornering and handling and give your car an aggressive look
Fitment:
- 2000-2005 Mitsubishi Eclipse
NOTE:
- No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation
- Will Require Wheel Alignment After Installation
- Springs May Not Drop To the Approximate Height immediately After Install. It Will Require Some Time For The Spring To Be Broken Into And Settle To The Height (1-3 Months Depending On Your Driving Condition)
6. Mitsubishi Eclipse 3G Suspension Racing Coil Drop Lower Lowering Sport Spring Kit Blue
Feature
Manufacturer Part Number: LS-013BL-AMA-L1Fitment: 2000-2005 Mitsubishi Eclipse
Quantity: 2 Front / 2 Rear Springs
Surface Finish: Blue
Specifics: Will Require Wheel Alignment After Installation
Description
7. Tein SKR74-AUB00 S.Tech Lowering Spring for Mitsubishi 3000GT
Feature
Front spring rate: 4.2 kilogram per millimeter (235 pounds per inch)Rear spring rate: 2.8 kilogram per millimeter (146 pounds per inch)
Front ride height: -39 millimeter (-1.5 inch)
Rear ride height: -33 millimeter (-1.3 inch)
Progressive spring rate design
Description
Tein S.Tech springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5 millimeter, and be clear of any manufacturer defects. Additional features: Chrome vanadium SAE9254V construction, progressive spring rate design, includes silencer rubber on certain applications, green powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5 millimeter sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting). Contents of spring kit: Individual spring x 4, main spring x 4, some applications include Tein silencer rubbers, warranty information and bump stop reference guide and 2 Tein decals.8. Megan Racing MR-LS-ML07 Coilover Lowering Spring
Feature
The high tensile strength and phosphate powder coating delivers outstanding spring ratesCarefully matched springs rates provide exceptional handling, response, control and balance
These springs offer a generous Drop to your car while remaining very "street able" by having enough clearance to avoid bottoming-out
Description
Megan Racing performance lowering springs are constructed of SAE 9254 cold wounded steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature "sagging". the result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very "street able" by having enough clearance to avoid bottoming-out; and the lowered center of Gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: spring rates and drop amount vary by different vehicle application and chassis load.).9. Tein SKR94-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer Evolution
Feature
Front spring rate: 3.8 kilogram per millimeter (213 pounds per inch)Rear spring rate: 5.2 kilogram per millimeter (280 pounds per inch)
Front ride height: -45 millimeter (-1.8 inch)
Rear ride height: -20 millimeter (-0.8 inch)
Progressive spring rate design
Description
Tein S.Tech springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5 millimeter, and be clear of any manufacturer defects. Additional features: Chrome vanadium SAE9254V construction, progressive spring rate design, includes silencer rubber on certain applications, green powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5 millimeter sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting). Contents of spring kit: Individual spring x 4, main spring x 4, some applications include Tein silencer rubbers, warranty information and bump stop reference guide and 2 Tein decals.10. Swift 4M020R Spec-R Sport Lowering Springs for 2008+ Mitsubishi LANCER EVO X 10
Feature
Part Number: 4M020RPrice includes set of 4 Springs - 2 Front, 2 Rear.
Made in Japan
Description
Swift made Sport Springs keeps the quality ride you get from the showroom, and adds improved handling and lower ride height for driving enthusiasts and style minded drivers who demand only the best.
From HPDE events to SCCA competition, Swift Spec-R Sport Springs are made for the track enthusiast looking to take their vehicle to the next level.
Features:
Front Drop: -1.3 inch
Rear Drop: -1.0 inch
Swift Spec-R Sport Springs were engineered with 3 characteristics in mind.
Modified ride height compared to Sport Springs to maximize optimal suspension geometry.
Further increasing the spring rate to enhance overall performance. The increase in spring rate is based on the upper limits of the vehicles factory shock valving.
Maintaining optimal comfort level for street use.
Spec R springs are wound with the same engineering and material as our sports springs. With the exception of stiffer rates and slight change in ride height; you can expect the same characteristics as our sports springs.
Recent Comments