Best inline fan bathroom for 2024
If you looking for inline fan bathroom then you are right place. We are searching for the best inline fan bathroom on the market and analyze these products to provide you the best choice.
Best inline fan bathroom
1. iPower 4" inch INLINE DUCT FAN blower HIGH CFM, cool vent exhaust for hydroponics, HPS MH LED Growing light (4 inch)
Feature
190 CFM; Noise Level: <50dB; Pre-wired 5-feet power cord; US 110/120V standard household plugDurable ceramic-coated. Composite fan blades and center hub which reduces noise and vibration
Made with quality UL components for quiet operation. Permanently lubricated bearing that requires zero maintenance
Solves air delivery problems without major system rework or expense. Removes heat from the system
Max Ambient Temp: 176 / 80. Warranty: 1 year
Description
- Versatility - can be installed anywhere such as: Greenhouse, Attics, Bathrooms,
- Composite fan blades and center hub which reduces noise and vibration
- Permanently lubricated bearing that requires zero maintenance
- Pre-wired 5' power cord
- Solves air delivery problems without major system rework or expense
- US 110/120V standard household plug
- Removes heat from the system
| Model | Voltage (V) | Frequency (Hz) | Input Power (W) | Air Velocity (CFM) | Speed (rpm) | Noise (dB) | Insulation class | Weight (lb) | Static (pa) |
| 4-Inch | 110 | 60 | 74 | 190 | 2460 | 50 | F | 6.2 | 360 |
| 6-Inch | 95 | 442 | 2380 | 55 | 10.6 | 350 | |||
| 8-Inch | 137 | 745 | 2600 | 58 | 13.7 | 570 | |||
| 10-Inch | 174 | 862 | 2390 | 59 | 13.7 | 533 | |||
| 12-Inch | 290 | 1060 | 2378 | 61 | 14.6 | 704 |
2. Fantech PB110 Inline Exhaust Bath Fan Kit, 110 CFM, Remote mount fan, for 4" duct
Feature
Powerful, efficient 110 cfm fanRemote mount fan ensures quiet operation.
Unobtrusive grille makes for better aesthetics
Uses a 4" flexible duct.
Intake Grille is 7".
Description
This product is a Fantech PB110 Bathroom Exhaust Fan 4" Duct - 110 CFM. Product is applicable in most commercial uses.3. Fantech PB270-2 Bathroom Exhaust Vent Fan
Feature
External rotor motor by ebm-papstPremium bath Fan with dual grille
Air flow capacity: 270 CFM
Description
Fantech premium bath Fan with dual Grille. Clear the air in smaller baths and powder rooms with Fantech single Grille premium bath Fan. The result is quiet yet powerful ventilation that is sure to protect your home from the damaging effects of moisture, steam and mold. 100 percent speed controllable. Rated for continuous duty. A small-scale Grille mounts in the ceiling while the Fan motor mounts in a remote location away from the living area. The result is quiet yet powerful ventilation that is sure to protect your home from the damaging effects of moisture, steam and mold. Fantech has expanded its premium bath Fan selection to include a trio of models powered by exterior mounted wall Fan. An excellent alternative when space is an issue or direct venting to the outside is required. Ideal for homes, condominiums and apartment complexes. Energy star qualified. 72 watts at 0.2 static pressure. 3.75 cfm/watt at 0.2 static pressure.4. Broan-Nutone ILFK2502 In-Line Bathroom Exhaust Fan Kit, Quiet White Ventilation Fan with Vertical Discharge, ENERGY STAR Certified, 250 CFM
Feature
Kit includes components to install a single exhaust system using 6-inch duct - fan, two grilles, two sleeves with dampers and duct clamps and a 3-way 6-inch u adapter (model Fy6) for easy installWall control, wire and ducting are sold separately
Stocking is made easy with NuTone's convenient in-line fan kits
Description
Remote mounted in-line ventilation fans are quiet and efficient residential solutions. Mount a high-performance ventilator in an out-of-the-way spot and you get the power with virtually no sound. Install the housing in the attic or basement, wherever it's most convenient and discreet. This fan is a great solution for large, open spaces.5. Fantech PB 110L7 110 CFM Bath Fan 7W Dimmable LED light, Energy Star, Wet Location, 4" Duct
Feature
Powerful, efficient 110 cfm fan with a LED lightRemote mount fan ensures quite operation
Unobtrusive grille makes for better aesthetics
110 cfm fan, one ceiling grille with light and grille housing with a damper
One 7W dimmable LED bulb. Uses a 4" flexible duct. UL listed for wet locations
Description
A small-scale grille mounts in the ceiling while the fan motor mounts in a remote location away from the living area. The result is a quiet yet powerful combination designed to help protect your home from the damaging effects of humidity. PB fans are designed for intermittent or continuous operation to meet ASHRAE Standard 62.2.6. Continental Fan Manufacturing RG100-ES 147 CFM Energy Star In-Line Duct Fan Bathroom Ventilation Kit from the AXC Collection
Feature
Quiet, powerful, compact bathroom ventilationExhaust is two to four times greater than traditional bathroom fans
Suitable for direct shower ventilation, with multiple venting points
Designed to handle long duct runs
Suitable for use with a timer, speed control or on off switch
Description
Attack moisture at its source. Choose the easy-to-install adjustable grille bathroom ventilation fan kit that features the AXC in-line duct fan and our attractive adjustable ventilation grilles. Vary airflow to suit your needs. Adjustable grille bathroom ventilation fan kits are available with one or two ventilation points. HVI recommends ventilation rates based on 8 air changes per hour. For most bathrooms this works out to 1 cfm per square foot of area, with a minimum of 50 cfm. A bathroom less than 100 square feet: Calculate 1 cfm per square foot of floor area. A minimum of 50 cfm is the required ventilation rate.. A bathroom larger than 100 square feet: To calculate the proper ventilation rate, add the cfm requirement for each fixture; toilet 50 cfm, shower 50 cfm, bathtub 50 cfm, jetted tub 100 cfm. Note: For proper sizing, the static pressure (SP) needs to be calculated.. Includes: AXC remote mount in-line fan, Mounting brackets, Adjustable grille/collar and Clamps. Features: Bathroom ventilation. Multiple ventilation points. Direct shower ventilation. Helpful Tips. AXC fan mounts easily to attic joists with the exclusive Continental Fan mounting bracket. Always use insulated duct in unheated spaces. When direct venting a shower, or if noise is a significant factor, use insulated flexible duct to reduce condensation and/or noise levels. Add a DFC digital fan control for smart control technology and energy savings.7. Soler & Palau KIT-TD100 In-line Exhaust Fan Kit
Feature
Genuine Soler & Palau productMade in Spain
includes both grills and mounting bracket
Description
Soler & Palau has been one of the world's leading exhaust fan manufacturers since 1951. One of Soler & Palau's commitments is to provide exceptional customer service.8. Continental Fan Manufacturing DX150A-ES 235 CFM Energy Star In-Line Duct Fan Bathroom Ventilation Kit from the AXC Collection
Feature
Quiet, powerful, compact bathroom ventilationExhaust is two to four times greater than traditional bathroom fans
Suitable for direct shower ventilation, with multiple venting points
Designed to handle long duct runs
Suitable for use with a timer, speed control or on off switch
Description
Attack moisture at its source. Choose the easy-to-install adjustable grille bathroom ventilation fan kit that features the AXC in-line duct fan and our attractive adjustable ventilation grilles. Vary airflow to suit your needs. Adjustable grille bathroom ventilation fan kits are available with one or two ventilation points. HVI recommends ventilation rates based on 8 air changes per hour. For most bathrooms this works out to 1 cfm per square foot of area, with a minimum of 50 cfm. A bathroom less than 100 square feet: Calculate 1 cfm per square foot of floor area. A minimum of 50 cfm is the required ventilation rate.. A bathroom larger than 100 square feet: To calculate the proper ventilation rate, add the cfm requirement for each fixture; toilet 50 cfm, shower 50 cfm, bathtub 50 cfm, jetted tub 100 cfm. Note: For proper sizing, the static pressure (SP) needs to be calculated.. Includes: AXC remote mount in-line fan, Mounting brackets, 2 adjustable grilles/collars, Clamps and Y-fitting. Features: Bathroom ventilation. Multiple ventilation points. Direct shower ventilation. Helpful Tips. AXC fan mounts easily to attic joists with the exclusive Continental Fan mounting bracket. Always use insulated duct in unheated spaces. When direct venting a shower, or if noise is a significant factor, use insulated flexible duct to reduce condensation and/or noise levels. Add a DFC digital fan control for smart control technology and energy savings.9. Hon&Guan 4 Inch Extractor Fan High Efficiency Mixed Flow Ventilation System Exhaust Air for Bathroom Kitchen Inline Duct Fan (S Series)
Feature
Moves air at a rate of 100 CFM, perfect for your bathroom and utility rooms. Notes: no plug, you can wire on a standard house plug.Lightweight and durable. Long life ball bearing motor (up to 50,000 hours).
Sound at high speed operation is quiet.
2 connections ways for low speed or high speed.
Easy to install, disassemble and clean when needed.
Description
HS-100S Parameters- Double Speed: Low/High
- Voltage: 110-120 V
- Frequency: 60 Hz
- Power: 30/38 W
- Speed: 2100/2600 (RPM)
- Air Volume: 128-170 m/h
- Air Pressure: 106/132 Pa
- Noise: 26/31 dB
- Life: Over 50000 Hours
- Weight: 1.3 KG
- Current (Amps): 0.45/0.55
- Electric Current Type: AC
- Blade Material: ABS Plastic
- Item Dimensions: 9.7*5.5*6.5 Inch - Diameter: 4 Inch
Application
HF Mixed Flow Fan can be used for exhaust and supply ventilation systems that require high pressure, hige efficiency airflow and low noise levels. With a range Applications of sizes that include 75mm, 100mm, 125mm HS fan can be used with rigid and flexible ducting. The HS Mixed Flow Fan are the ideal solution for air exhaust systems for rooms with high humidity such as bathrooms and kitchen, as well as ventilation for apartments, house, shops, cafes, restaurant, cinemas etc.
Design
The motor is attached to the body of the fan by two quick release clips which enables the motor to rotate to provide connection for confined spaces and removal for maintenance without removing the whole fan or duct. All models have an option of standard which has a two speed motor or overrun timer option variable range of 1 to 30 minutes.
Motor
The single phase ball bearing motor has two speeds and is equipped with standard thermal overload protection (STOP) with automatic restart. Motor protection rating IP44 and are fully speed controllable.
Mounting
The fan can be mounted in line or at either and of the duct run and at any angle. Horizontally or vertically. All fans can be mounted in parallel to increase the volume of air or in series to increase the pressure. The casing is fitted with a mounting plate. The mounting box can be rotated to be installed in any position for easy installation and connection.
10. Hon&Guan 6 Inch Inline Duct Fan Exhaust Fan Mixed Flow Inline Fan Hydroponic Air Blower for Home Ventilation Bathroom Vent and Grow Room Ventilation Powerful & Silent Inline Fan 312 CFM (P series)
Feature
Energy efficient, ultra-quiet operation. Notes: no plug, you can wire on a standard house plug.Long life ball bearing motor (up to 50,000 hours) with thermal overload protection.
Lightweight, durable and UV resistant plastic case provides strength for extended use.
Easy to install and disassemble.Two connections ways for low speed or high speed.
Compact size for limited spaces. Notes: no plug.
Description
HF-150P Parameters- Double Speed: Low/High
- Voltage: 110-120 V
- Frequency: 50 Hz
- Power: 53/65 W
- Speed: 1850/2550 (RPM)
- Air Volume: 410-530 m/h
- Air Pressure: 240/300 Pa
- Noise: 29/33 dB
- Life: Over 50000 Hours
- Weight: 2.6 KG
- Current (Amps): 0.49/0.58
- Electric Current Type: AC
- Blade Material: ABS Plastic
- Item Dimensions: 12.5*7.9*8.3 Inch
- Diameter: 6 Inch
Application
HF Mixed Flow Fan can be used for exhaust and supply ventilation systems that require high pressure, powerful airflow and low noise levels. With a range Applications of sizes that include 100mm, 125mm, 150mm, 200mm, 250mm and 315mm HF fan can be used with rigid and flexible ducting. The HF Mixed Flow Fan are the ideal solution for air exhaust systems for rooms with high humidity such as bathrooms and kitchen, as well as ventilation for apartments, house, shops, cafes, restaurant, cinemas etc.
Design
The motor is attached to the body of the fan by two quick release clips which enables the motor to rotate to provide connection for confined spaces and removal for maintenance without removing the whole fan or duct. All models have an option of standard which has a two speed motor or overrun timer option variable range of 1 to 30 minutes.
Motor
The single phase ball bearing motor has two speeds and is equipped with standard thermal overload protection (STOP) with automatic restart. Motor protection rating IP44 and are fully speed controllable.
Mounting
The fan can be mounted in line or at either and of the duct run and at any angle. Horizontally or vertically. All fans can be mounted in parallel to increase the volume of air or in series to increase the pressure. The casing is fitted with a mounting plate. The mounting box can be rotated to be installed in any positon for easy installation and connection.
Recent Comments