Best infrared remote extender uverse

If you looking for infrared remote extender uverse then you are right place. We are searching for the best infrared remote extender uverse on the market and analyze these products to provide you the best choice.

Best infrared remote extender uverse

Product Features Editor's score Go to site
Inteset Wireless IR Repeater, Extender & Blaster Sends Infrared Using Long Range Radio Frequency (RF) for Cable & Satallite Boxes as Well as Most Other A/V Devices Inteset Wireless IR Repeater, Extender & Blaster Sends Infrared Using Long Range Radio Frequency (RF) for Cable & Satallite Boxes as Well as Most Other A/V Devices
Go to amazon.com
Infrared Resources Block-less 2 device 30~60kHz IR Receiver Extender Kit,Operates all A/V(IR) devices,Apple TV etc. (+Uverse,SA/Cisco Explorer,DirecTV,Bell, Foxtel) Infrared Resources Block-less 2 device 30~60kHz IR Receiver Extender Kit,Operates all A/V(IR) devices,Apple TV etc. (+Uverse,SA/Cisco Explorer,DirecTV,Bell, Foxtel)
Go to amazon.com
Infrared Resources Single Device USB Powered 30~60kHz IR Remote Extender Repeater for The Majority of A/V (IR) Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel STB,A/V Receivers etc. Infrared Resources Single Device USB Powered 30~60kHz IR Remote Extender Repeater for The Majority of A/V (IR) Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel STB,A/V Receivers etc.
Go to amazon.com
Inteset Wireless Long Range IR Repeater, Extender & Blaster Sends Infrared Using Radio Frequency (RF) Inteset Wireless Long Range IR Repeater, Extender & Blaster Sends Infrared Using Radio Frequency (RF)
Go to amazon.com
BAFX Products - Triple Zone IR Repeater/Remote Control Extender Kit BAFX Products - Triple Zone IR Repeater/Remote Control Extender Kit
Go to amazon.com
Infrared Resources 30~60kHz IR Remote Receiver Extender Over CAT5/6 to 700ft up to 8 Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and Other Set Top Boxes,Digital Terminal Adapters,DTA Infrared Resources 30~60kHz IR Remote Receiver Extender Over CAT5/6 to 700ft up to 8 Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and Other Set Top Boxes,Digital Terminal Adapters,DTA
Go to amazon.com
Infrared Resources -4- device 30~60kHz IR Remote Extender Repeater for the majority of A/V (IR) devices including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and other Set Top Boxes,A/V Receivers etc. Infrared Resources -4- device 30~60kHz IR Remote Extender Repeater for the majority of A/V (IR) devices including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and other Set Top Boxes,A/V Receivers etc.
Go to amazon.com
IR RepeaterIR Remote Control ExtenderInfrared Repeater System (2 Dual Head ir emitter) IR RepeaterIR Remote Control ExtenderInfrared Repeater System (2 Dual Head ir emitter)
Go to amazon.com
Infrared Resources Wireless 20-60kHz IR Remote Extender Repeater for The Majority of A/V (IR) Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and Other Set Top Boxes,A/V Receivers etc. Infrared Resources Wireless 20-60kHz IR Remote Extender Repeater for The Majority of A/V (IR) Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and Other Set Top Boxes,A/V Receivers etc.
Go to amazon.com
Infrared Resources Multi Device 30~60kHz IR Remote Extender Repeater for the majority of A/V (IR) devices including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and other Set Top Boxes,A/V Receivers etc. Infrared Resources Multi Device 30~60kHz IR Remote Extender Repeater for the majority of A/V (IR) devices including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and other Set Top Boxes,A/V Receivers etc.
Go to amazon.com
Related posts:

1. Inteset Wireless IR Repeater, Extender & Blaster Sends Infrared Using Long Range Radio Frequency (RF) for Cable & Satallite Boxes as Well as Most Other A/V Devices

Feature

Dual Band, Long Range 38 to 56 kHz frequency infrared receiving and transmitting
Conceals Cable Box (STB) and other A/V components Wirelessly using most Remotes
Wireless Distance: up to 100 ft or more. Distance may vary due to obstacles. No direct line-of-sight needed
Plug and play easy installation. Compatible with most IR devices including Uverse, Dish & DirectTV. Be sure your remote and box are set to IR not RF.
Fast Support with a One Year Warranty. The Inteset INT422 Remote works great with this system. Contact us at: universalremotes.net.

Description

This wireless remote control system kit allows you to control devices up to hundreds of feet away through walls, cabinets and other obstacles with no direct line-of-sight needed except from the remote to your TV. Obstacles such as thick barriers, metal studs and steel mesh in walls do reduce the signals effectiveness but distances of more than one hundred feet are not uncommon.

Compact at less than 2 inches in diameter. You place the IR Receiver Unit near your TV or attach the IR Receiver cable to your TV if you want to hide the IR Unit. Your remote's signal will then be received and transmitted via Radio Frequency (RF) to the Emitter Unit near the device(s) you want to control. Then you plug the IR Emitter Cable into the Emitter Unit, attach the emitter bud(s) onto the IR Receiver(s) of your equipment and the system is read. If you use the emitter buds be sure to cover the IR receiver on the device you want to control precisely.The emitter bud must be right on top of the IR receiver of the device.

Installation Instructions: Step 1- Place the IR Receiver unit and IR Receiver cable in your desired location (ex: TV, Display). Step 2- Place the IR emitter unit and IR emitter cable on the device(s) you want to control. (ex: STB, DVD player, Receiver). The emitter bud should be placed directly on the IR sensor of the device you are trying to control. Step 3- Plug the IR receiver cable into the IR receiver jack on the receiver unit and plug the IR emitters into the emitter jack of the emitter unit. Step 4- Connect the power supply to each unit. This product works with AT&T Uverse but does not work with Dish, Direct TV, Tivo or Cisco 4642 HDC.

The Kit contains: (1) IR Receiver Unit (RX), (1) IR Receiver Cable, (1) IR Emitter Unit (TX), (1) IR Dual Head Emitter Cable (Controls 2 Devices), (2) 12v Power Adapters, User Manual. Additional devices can be controlled, up to 4, by using a 4 bud emitter cable. Contact us at: universalremotes.net

2. Infrared Resources Block-less 2 device 30~60kHz IR Receiver Extender Kit,Operates all A/V(IR) devices,Apple TV etc. (+Uverse,SA/Cisco Explorer,DirecTV,Bell, Foxtel)

Feature

Visible LED confirmation. Receiver size 2" (L) 1/2" (W) 7/16" (H) Made in S Korea
9ft receiver lead from the hub with excellent IR receiving range. Operate -2- devices
IR Filtering Technology effectively blocks out external noise. IRI,CFL,ESI,EMI,Plasma, Sun
Includes optional USB power adapter cable and IR Emitter covers
23 Years Experience Manufacturing And Supplying The Cable And Hotel Industry

Description

USB power cable adapter included. Plugs directly into any USB port to power the kit.Perfect when the cable box is placed behind the TV.

For use with -2- devices: All brands of A/V device's and remote control (30- 60kHz). Including ATT-Uverse model VIP1225 , VIP1216 , VIP2000 series and IPN4320, Scientific Atlanta STB's, and name brand A/V Receivers.

The IR Repeater kit receiver is permanently attached to the hub. If you need to extend the length of the kit you may use any 25ft IR Receiver and Emitter extension cable to extend the emitter length.

Excellent IR receiving range. IR Filtering Technology effectively blocks out external noise. Infrared Interference (IRI) Compact Fluorescent Lamp (CFL) Electro-Static Interference (ESI) and Plasma TV and eliminate Sunlight etc. Electro-Magnetic Interference (EMI) Plasma TV, Sunlight. We have eliminated the connector block as required with current IR Repeater Kits. This enables a clean and simple install!

Operates with up-to-date Set Top Boxes without any problem and has a Self Auto Test function for the IR sensor. The IR sensor will automatically test itself.The BLUE LED in the Receiver will blink two times when the power is plugged in if everything is OK. It also blinks to indicate IR signal is being received from the remote control.The IR emitter will flash red to indicate the IR signal is being transmitted to the device. The power supply has a blue LED that indicates the unit is powered up and the power supply is working.

KIT INCLUDES: IR Sensor with 9ft lead x1 IR Emitter + Cover x2 Power Supply IR-P x1 USB power adapter cable

3. Infrared Resources Single Device USB Powered 30~60kHz IR Remote Extender Repeater for The Majority of A/V (IR) Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel STB,A/V Receivers etc.

Feature

Compatible with 30-60kHz A/V device's i.e. ATT-Uverse, SA Explorer,DTV,Apple TV, Xbox 360,soundbars
9ft receiver lead from the hub with excellent IR receiving range. Operate -1- device
IR Filtering Technology effectively blocks out external noise. IRI,CFL,ESI,EMI,Plasma, Sun
Replaces Scientific Atlanta IR Extender 1004648,4029013,4022323
Printed and Packaged in the USA. Visible LED confirmation. Receiver size 2" (L) 1/2" (W) 7/16" (H). Made in S Korea

Description

USB power cable Plugs directly into any USB port to power the kit.

Infrared Resources IRP-1U Operates -1- device. Works with All brands of A/V device's and remote control (30- 60kHz). Including Soundbars,Scientific Atlanta digital cable boxes: 4200, 4200HD, 4250, 4250HD, 8300, 8300HD and Samsung HD.,ATT-Uverse model VIP1225 and VIP1216 ,VIP2000 , IPN4320. Scientific Atlanta STB's, and name brand A/V Receivers.NOTE: The operating distance might be shorter (25ft) when using with a 56kHz device and remote.

The IR Repeater kit receiver is permanently attached to the hub. If you need to extend the length of the kit you may use an 25ft IR Receiver and Emitter extension cable to extend the emitter length.

Excellent IR receiving range. IR Filtering Technology effectively blocks out external noise. Infrared Interference (IRI) Compact Fluorescent Lamp (CFL) Electro-Static Interference (ESI) and Plasma TV and eliminate Sunlight etc. Electro-Magnetic Interference (EMI) Plasma TV, Sunlight. We have eliminated the connector block as required with current IR Repeater Kits. This enables a clean and simple install!

Operates with up-to-date Set Top Boxes without any problem and has a Self Auto Test function for the IR sensor. The IR sensor will automatically test itself. The BLUE LED in the Receiver will blink two times when the power is plugged in if everything is OK. It also blinks to indicate IR signal is being received from the remote control.The IR emitter will flash red to indicate the IR signal is being transmitted to the device. The power supply has a blue LED that indicates the unit is powered up and the power supply is working.

KIT INCLUDES: IR Sensor with 9ft lead x1 IR Emitter x1 12 in USB power adapter cable x1

4. Inteset Wireless Long Range IR Repeater, Extender & Blaster Sends Infrared Using Radio Frequency (RF)

Feature

Long Range 20 to 60 kHz frequency infrared receiving and transmitting
Conceals Cable & Satellite Boxes (STB) and other A/V components Wirelessly using almost any Remote
Wireless Distance: of 100 ft or more. Distance may vary due to obstacles. No direct line-of-sight needed. Once paired, other units can be installed in the same house w/o interference.
Plug and play easy installation. Compatible with most IR devices including Uverse, Dish & DirectTV. Be sure your remote and box are set to IR not RF. No known incompatibilities
FAST Support with a One Year Warranty. Contact us at: universalremotes.net

Description

This wireless remote control system kit allows you to control devices up to hundreds of feet away through walls, cabinets and other obstacles. Thick barriers, metal studs and steel mesh in walls can reduce the signals effectiveness but distances of more than one hundred feet are not uncommon. Compact at less than 2 inches square and made from solid aluminum, you place the IR Sender Unit (TX) near your TV or attach the IR Sender cable to your TV bezel if you want to hide the TX Unit. Your remote's signal will then be received and transmitted via Radio Frequency (RF) from the TX unit to the RX unit near the device you want to control.

Installation Instructions: Step 1- Place the IR Sender (TX) unit and Sender cable in your desired location (ex: TV, Display). Step 2- Place the IR Receiver (RX) unit and IR emitter/receiver cable on the device you want to control. (ie: STB, DVD player, A/V Receiver). The emitter bud should be placed directly on the IR sensor of the device you are trying to control. Step 3- Plug the IR Sender (TX) cable into the "Ext IR IN" jack on the TX unit and plug the IR emitter/receiver cable into the "Ext IR Out" jack of the emitter RX unit. Step 4- Connect the USB power supply cable to each unit and then either plug the USB cables into a USB port on your devices or into the port on a 110v adapter (not included). Additional devices can be controlled, up to 4, by using a 4 bud emitter RX cable available from Inteset. However, control of multiple devices can reduce the signal range. Step 5-Pair the units using the Lock ID buttons on both units. In most cases, after pairing, additional sets can be installed without interference. Contact us at: universalremotes.net

5. BAFX Products - Triple Zone IR Repeater/Remote Control Extender Kit

Feature

TRIPLE ZONE - Our Triple Zone or Multi Zone Kit allows for the independent control of identical devices on one kit. In essence with the triple zone kit you are getting 3 single zone IR Repeater Kits built into 1 kit so there is less to install and less cluttering up your home. This kit is recommended only for more advanced users. If unsure of which kit to purchase, please feel free to contact BAFX Products for help!
IMPORTANT - Our Triple Zone Repeater Kit is NOT compatible with the following devices: Marantz, RNG150, RNG150N & RNG250. If you have one of these devices, you will need our Single Zone kit for that device. This kit is compatible with ALL other devices, including but not limited to: Onkyo, Yamaha, Sony, Verizon, Uverse, Denon, AT&T, COX, Dish Network, Hopper, Logitech, Harmony & More!
WARRANTY & SUPPORT - BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
CONTROL - With this kit you can control up to 2 devices per zone with the included parts (1 Dueal head emitter cable per zone and one IR receiver per zone). Each zone may be expanded to control up to 4 devices with the purchase of additional emitter cables.
COMPACT - A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!

Description

*IMPORTANT* Most customers will want the single zone kit. This triple zone kit is only recommended for advanced users. If you are unsure of which kit to purchase, please contact BAFX for assistance.

The BAFX Products Triple Zone IR Repeater & Remote Control Extender Kit is, essentially, 3 IR repeater kits in 1! It allows you to control 3 separate but identical devices independently of each other, FROM DIFFERENT ROOMS, while only purchasing and installing 1 repeater kit rather than 3 repeater kits. Similar "Zoned" IR Repeater kits can easily run $200-300+ or more! We now offer an affordable option to everybody! Look no further for your zoned repeater kit needs!

Most people will want our standard, single zone, kit however, for more advanced users the Triple Zone kit may be a better solution.

Specs:
3 independent zones
3 dual head emitters cables (one for each zone)
3 IR receivers (one for each zone)
1x User manual
1x Power adapter
Link to instructional setup video
IR receiving distance of 25 Feet
Distribution block can be powered by USB cable (NOT included)
1 Year warranty

6. Infrared Resources 30~60kHz IR Remote Receiver Extender Over CAT5/6 to 700ft up to 8 Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and Other Set Top Boxes,Digital Terminal Adapters,DTA

Feature

Expandable up to 8 emitters( additional emitters sold separately) on the receiving CAT5 dongle, -3- Dual emitters(additional emitters sold separately? on transmitter dongle
30~60kHz IR receiver with blue LED confirmation and 9ft lead. Made in S Korea
Compatible with ALL 38kHz-56kHz A/V device's i.e. ATT-Uverse, Scientific Atlanta STB's
Emitters flash RED to indicate IR signal is being transferred to the device IR Sensor
IR Filtering Technology effectively blocks out external noise. IRI,CFL,ESI,EMI,Plasma, Sun

Description

The transmitter is also a stand alone 1 in 1 out IR remote repeater for controlling local nearby devices.

The receiver unit has -3- IR OUT ports that accommodates up to -3- dual eye emitters making it a total of -8- emitters.

Power supply has detachable USB power cable. Perfect when no power outlets are available, or the cable box is placed behind the TV.

Suitable for home theater, AV rooms, conference rooms, churches, and more.

Infrared Resources IRP-X5 includes a dual emitter to operate -2- devices. Works with all brands of A/V device's and remote controls (38- 56kHz). Including ATT-Uverse, Scientific Atlanta STB's, and name brand A/V Receivers.

Use any stereo cable with 3.5mm jack and 3.5mm plug to extend the emitter or receiver

Excellent IR receiving range. IR Filtering Technology effectively blocks out external noise. Infrared Interference (IRI) Compact Fluorescent Lamp (CFL) Electro-Static Interference (ESI) and Plasma TV and eliminate Sunlight etc. Electro-Magnetic Interference (EMI) Plasma TV, Sunlight.

Operates with up-to-date Set Top Boxes without any problem and has a Self Auto Test function for the IR sensor. The IR sensor will automatically test itself. The Blue LED will blink two times when the power is plugged in if everything is OK.

KIT INCLUDES: IR Sensor with 9ft lead x1 IR Emitter x2 Power Supply IR-P x1 with USB power cable IR Cover x1 TX and RX dongle 1 7/8 " (L) 1 1/16in (W) 1 3/16in (T)

7. Infrared Resources -4- device 30~60kHz IR Remote Extender Repeater for the majority of A/V (IR) devices including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and other Set Top Boxes,A/V Receivers etc.

Feature

Visible Blue LED confirmation when IR signal is received. Made in S Korea
9ft receiver lead from the hub with excellent IR receiving range. Operate -4- devices
IR Filtering Technology effectively blocks out external noise. IRI,CFL,ESI,EMI,Plasma, Sun
Includes optional USB power adapter cable
23 Years Experience Manufacturing And Supplying The Cable And Hotel Industry

Description

For use with -4- devices:

USB power cable adapter included. Plugs directly into any USB port to power the kit. Use in place of our power supply when no power outlet is available or when device is confined to a remote cabinet or when the cable box is placed behind the TV.

All brands of A/V device's and remote control (38-56kHz). Including ATT-Uverse VIP1225 and VIP1216, VIP2000, IPN4320 ,Scientific Atlanta STB's, and name brand A/V Receivers.

The IR Repeater kit receiver is permanently attached to the connecting splitter. If you need to extend the length of the kit you may use any 25ft IR Receiver and Emitter extension cable to extend the emitter length.

Excellent IR receiving range. IR Filtering Technology effectively blocks out external noise. Infrared Interference (IRI) Compact Fluorescent Lamp (CFL) Electro-Static Interference (ESI) and Plasma TV and eliminate Sunlight etc. Electro-Magnetic Interference (EMI) Plasma TV, Sunlight.

We have eliminated the connector block as required with current IR Repeater Kits. This enables a clean and simple install!

Operates with up-to-date Set Top Boxes without any problem and has a Self Auto Test function for the IR sensor. The BLUE LED in the Receiver will blink twice when the power is plugged in if everything is OK. It also blinks to indicate IR signal is being received from the remote control.The IR emitter will flash red to indicate the IR signal is being transmitted to the device. The power supply has a blue LED that indicates the power supply is working.

KIT INCLUDES: IR Sensor with 9ft lead x12 Dual IR Emitter cables, 9in 3.5mm dual mono adapter Power Supply IR-P x1 12in USB power adapter cable

All trademarks and registered trademarks are the property of their respective owners.

8. IR RepeaterIR Remote Control ExtenderInfrared Repeater System (2 Dual Head ir emitter)

Feature

Devices compatiable : Tested to work with amplifier, cable box, stereo receiver,game console, Satellite TV receiver, CD player, DVD player, Blu-ray player and other streamers as well as most A/V devices, Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
Devices concontroled:you can control up to 8 infrared devices - Expandable to 12 devices(Additional IR emitters sold separately)with the included IR Receiver.
High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor.
Out of sight :small main block & pure copper wire to transfer signal up to 200 meters,so you can place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control.
package includes: 1- Distribution box; 1-IR Receiver; 2-Dual head IR Emitters for 4 A/V devices can be chosen; 1-12v DC 500 MA power plug and 1-User Manual.

9. Infrared Resources Wireless 20-60kHz IR Remote Extender Repeater for The Majority of A/V (IR) Devices Including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and Other Set Top Boxes,A/V Receivers etc.

Feature

External blaster sends the IR signal up to 14ft away and is easier to install and more reliable then stick on emitters and operate multiple devices within the enclosed cabinet or area
915MHz Radio frequency avoids interference with 433 MHz and 933MHz. Both TX and RX together are smaller then a credit card! Each unit measures 1 3/4" x 1 5/8" x 1 1/8" tall
Expandable! add a splitter and a dual or triple eye emitter.
Works from 600 feet away in open space. Suitable for small home or office up to large multi-level homes 3,500 to 5,000 sq. Ft
TX/RX units can be powered with the Power Supply or the detachable USB power cable. Simply plug into any USB port

Description

The RX and TX has soft touch surface and measure 1 3/4"x 1 5/8"x 1 1/8" tall. They can be used as stand alone or with the IR Receiver and IR blaster included in the kit. Open space IR transmission is up to 600ft. Excellent for any size single, dual, or tri level home. Also great for patio, pool etc. The powerful external IR blaster transmit the IR signal 14ft. Ideal for racks, enclosed cabinets, media rooms, closets etc as the IR will bounce throughout the area. Simply plug the splitter into the RX unit and then plug in each blaster. The blasters are 7 feet long. For additional length use any Stereo extension cable Kit Includes:-1-TX,-1-RX,-1-IR Receiver, -1- IR blaster, -2- power supply's,-1- manual

10. Infrared Resources Multi Device 30~60kHz IR Remote Extender Repeater for the majority of A/V (IR) devices including U-Verse,SA/Cisco Explorer,DTV,Bell,Foxtel and other Set Top Boxes,A/V Receivers etc.

Feature

Visible Blue LED confirmation when IR signal is received. Made in S Korea
9ft receiver lead from the hub with excellent IR receiving range.
IR Filtering Technology effectively blocks out external noise. IRI,CFL,ESI,EMI,Plasma, Sun
Connector block has been eliminated. Includes optional USB power adapter cable.
23 Years Experience Manufacturing And Supplying The Cable And Hotel Industry

Description

USB power cable adapter included. Plugs directly into any USB port to power the kit. Use in place of our power supply when no power outlet is available or when device is confined to a remote cabinet or when the cable box is placed behind the TV.

The IR blaster(does not blink) floods inside cabinet with transmitted IR Signal. Excellent for Racks and enclosed cabinets.

Receiver works with: All brands of A/V device's and remote control (38- 56kHz). Including ATT-Uverse,VIP1225 VIP1216, VIP2000 , IPN4320 series,Scientific Atlanta STB's, and name brand A/V Receivers.NOTE: The operating distance might be shorter (25ft) when using with a 56kHz device and remote.

The receiver is permanently attached to the hub. If you need to extend the length of the IR Repeater kit you may use any 25ft extension cable to extend the emitter length.

Excellent IR receiving range. IR Filtering Technology effectively blocks out external noise. Infrared Interference (IRI) Compact Fluorescent Lamp (CFL) Electro-Static Interference (ESI) and Plasma TV and eliminate Sunlight etc. Electro-Magnetic Interference (EMI) Plasma TV, Sunlight. We have eliminated the connector block as required with current IR Repeater Kits. This enables a clean and simple install!

Operates with up-to-date Set Top Boxes without any problem and has a Self Auto Test function for the IR sensor. The IR sensor will automatically test itself. The Red LED will blink two times when the power is plugged in if everything is OK. NOTE: the blaster will not blink. It is a 940nm led that is not visible.

KIT INCLUDES: IR Sensor with 9ft lead x1 IR Blaster x1 Power Supply IR-P x1 USB power adapter cable x1

Conclusion

All above are our suggestions for infrared remote extender uverse. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using infrared remote extender uverse with us by comment in this post. Thank you!

You may also like...