Top hitch rattle shim for 2022
When you looking for hitch rattle shim, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable hitch rattle shim is not an easy task. In this post, we show you how to find the right hitch rattle shim along with our top-rated reviews. Please check out our suggestions to find the best hitch rattle shim for you.
Best hitch rattle shim
1. Softride Quiet Ride Locking Tightening Hitch Pin; Anti-Rattle for Receiver Hitches, Bike Racks, or Boat Trailers; Silence the "clanking" noise that occurs while towing (25219)
Feature
Compatible with hitch receivers, hollow shank ball mounts, and multiple brands of hitch mounted bike racks, including Thule, Yakima, Saris, Kuat, Rocky Mounts, Swagman, Hollywood, Allen, and Inno. and hitches from manufacturers including Curt, Reese, Draw-Tite, Hidden Hitch, TorkLift, and Ultra-FabEliminate the annoying rattle and vibration when towing by using this versatile anti rattle anti theft accessory, compatible across brands. Anti rattle hitch tightener reduces wobble; stops movement, play, and sway; eliminates the clank noise. Halts up and down and side to side motion; prevent drawbar rattling and wobbling under load.The adapter can be rotated 180 for variances in wall thickness of the ball mount or receiver mounted equipment
Perfect for use with a car, van, truck, RV, tow vehicle, SUV, ATV, bicycle rack, camper, fifth wheel, boat trailers, cargo trailer, gooseneck and towing accessories. Extra long pin compatible with Toyota hitches. Reduces wear on drive train when stopping and starting. Anti-theft hitch lock included for security.
Kit includes: heavy duty solid stainless steel threaded hitch pin, lock washer, nut, rugged nut holder and fit adjuster; durable brass lock and keys; rubber dust cover for extra protection against dirt, debris, and weather. Friendly customer service from a small family-run company in the USA.
Easy installation hand tighten the pin, THEN attach lock, THEN wrench tighten. Install with hitch classes 1, 2, 3, and 4 (i. ii. Iii. Iv), on 2 receiver (not on 1.25 receivers). Patented 2-axis tightening. An insert fitted with a nut slides inside a hollow ball mount to pull it tightly against the receiver tube. Fix to keep tow trailer secure, quiet, snug and tight.
NOTE: Please refer to the user manual before use
2. CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25" and 2" Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel)
Feature
CZC AUTO hitch tightener equiped with heavy duty 0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free.Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing.
This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan.
Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom.
New arrival with very good price for only 1 month. Do not miss this price in hesitation. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you.
3. CURT 22321 Anti-Rattle Hitch Pin Shim Device, Fits 2-Inch Receiver, 1/2-In Hole
Feature
QUIETER TOWING. Enjoy a smoother, quieter ride while towing your trailer with this anti-rattle hitch pin. It is designed to hold the ball mount firmly in place, deterring vibrations and noiseVERSATILE. This trailer hitch anti-rattle fits virtually any 2-inch x 2-inch hitch receiver with a 1/2-inch pin hole. It is compatible with hollow-shank accessories only
HIGH-STRENGTH. For dependable towing strength, this trailer hitch anti-rattle device is constructed from solid steel
CORROSION-RESISTANT. This anti-wobble hitch pin is made to endure the outdoor elements, resisting rain, dirt and other corrosive threats with a durable zinc plating
EASY TO INSTALL. Installing this anti-rattle hitch pin is fast, simple and secure. First, insert the receiver hitch anti-rattle shim into the accessory shank. Then, insert the accessory and thread in the hitch pin and tighten with a wrench
4. Hitch Clamp - Heavy Duty, 2 Inch - Made in The USA - Hitch Tightener, Anti Rattle Device, Receiver clamp
Feature
Eliminates the hitch wobble at the junction of your bike rack / utility carrier / trailer hitch and your hitch receiverDesigned for use with almost all hitch mounted bike racks
Designed for use with almost all cargo carriers
A simple design that is easy to install and simple to use
Designed and made in the USA
5. HiTow Trailer Hitch Tightener Anti-Rattle Stabilizer for 2" & 1.25" Hitch, Rubber-Coated No Rattle Noise, Corrosion Resistant
Feature
Compatible with all 1-1/4 inch and 2 inch Hitch, Rubber CoatedStops rocking, wobbling, banging, clanking and jerking caused by sloppytake all the slop out, no rattle or fish tail, will providing a smooth and quiet towing experience
Includes a heavy-duty U-bolt and thick powder coated plate that will stand up to all weather conditions and loads
Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low
Perfect for a variety hitch of SUVs, vans, trucks, RVs, sedans and trailers
6. Curt Manufacturing 23530 Anti-Rattle Hitch Lock
Feature
Stops rattling and prevents swaying of load when using a hollow shank5/8" pin diameter fits hollow 2" x 2" shanks
Heavy-duty square spring nut for reliable security
Watertight dust cap prevents internal corrosion
Protected by a durable chrome-plated finish
7. 2 1/2 Class V Hitch Tightener GH-063, Fits 2.5" X 2.5" Hitch Receiver Anti Rattle, Anti Wobble
Feature
Eliminates rattle and sway in class V hitchesCompatible with most 2.5 x 2.5" Receiver hitches and attachments.
Watch Installation Video On Youtube,Copy to your Browser
http://youtu.be/WsomAyXBphY
8. Anti Rattle Hitch Tightener Stabilizer No Sway for 2" and 1.25" Steel Heavy Duty Rust Free
Feature
[Compatibility] Hitch tightener can be used with 2" and 1.25" tow hitch receiversincluding Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands. It is compatible with all hitch classes includes I, II, III, and IV (1, 2, 3 and 4), both 2 and 1.25 models, ideal for hitches on SUVs, vans, trucks, RVs, sedans and trailers.[Material] Includes a heavy-duty U-bolt and thick powder coated plate that will last to all weather conditions and loads.
[Easy Installation] Convenient and easy to install! Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place. In just 3 easy steps and in less than 10 minutes.
[Safety] prevents from rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount. Leading design of Tulga hitch tightener is the best anti rattle hitch tightener in the market.
[Warranty] Our heavy duty built hitch tightener is backed with 30 days money back guarantee and LIFETIME WARRANTY
9. Hitch Clamp Cross Clamp 2 Heavy Duty Made in The USA - Anti-Rattle Hitch Coupling clamp/Hitch Tightener
Feature
Eliminates the wobble, sway or rattle between your hitch and receiverDesigned for use with most hitch mounted bike racks and cargo cariers
A simple design that is easy to install and simple to use
Easy to install without removing the hitch
Made in the USA
10. Towever 84705 Trailer Hitch Tightener Anti Rattle Stabilizer 2 & 1.25 inches Hitch, Aluminum Constructed Rust Free Hitch Clamp Easy Installation
Feature
Tightener for all 2 and 1-1/4 shank hitch with easy installationThe hitch clamp Plate constructed by aluminum material, rust free and no rattle noise, provide unique towing experience.
The pack Included a zinc nickel u bolt, thick powder coated plate, spring lock washers and flat washers help to tightening it in place and secure.
Compatible with hitch product with no wobbling, rocking, often buy together with towever 84332, 84131, 84433 hitch extender.
Towever brand for lifetime warranty and quality guarantee
Recent Comments