Best electrical volt tester
If you looking for electrical volt tester then you are right place. We are searching for the best electrical volt tester on the market and analyze these products to provide you the best choice.
Best electrical volt tester
1. Sperry Instruments STK001 Non-Contact Voltage Tester (VD6504) & GFCI Outlet / Receptacle Tester (GFI6302) Kit, Electrical AC Voltage Detector, Yellow & Black
Feature
Verify the presence of AC voltage prior to working on electrical installation or troubleshootingStandard 3-wire and GFCI protected 120V outlets. The tester is protected
Detects the presence of AC Voltage and tests for wiring errors in wall outlets as well as GFCI operation
Non-contact sensing circuit senses voltage from 80-1000V AC
Compact ergonomic design with over-molded rubber grips
Description
Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The electrical testers below accurately identify and capture circuit continuity and voltage measurements. These testers are ideal for any electrical professional or to have at home.2. Non-Contact Voltage Tester, Electrical Voltage Detector Pen 12-1000V AC Inductive Electric Tester Pen Digital Multi-meter Volt Meter with Alarm Mode Live/Null Wire Judgment
Feature
Distinguish the live and null wire through different frequency alarm sound AND led indicator; Voltage detection range 12-1000V ACNon contact voltage tester will flash and beep when the device close to AC voltage greater during the specified voltage range without touch the measured object, and also with the beep sound and LED to indicate to support enough safety measuring application
Voltage frequency can be distinguished by beep and LED indicator. It's loud enough to hear over moderate machine equipment noise
LED light allows operation even on dark environment; Auto power off after no operation for 5 mins to save energy
Convenience and easy to carry, small in size, easy to store in tool box or carry in your pocket
Description
Auto Shut-down to Save Power:If the device is not operated within five minutes, it will turn off automatically
Rotate the top black button on the device to quickly and easily replace the battery if the device is out of power.
NCV Sensitivity Indication Mode:
If the instrument detects common AC signal, the lamp (low) along lights up;
If it detects higher AC signal, the lamp(low, mid) both lights up;
If it detects highest AC signal ,the lamps(low, mid, high) all lights up;
The buzzer makes the different alarm sound correspondingly.
Build-in Flashlight:
LED light design makes it work even under dark evironment. It is an ideal tool for electiric worker.
Safety:
The volt tester is complied with the CE CAT III 1000V/ CAT IV 600V, and it is also equipped with an audible and visual alarm to guard your safety.
Note:
This function is designed for voltage detection in the weak electric field.
With NCV function can detect objects without any AC voltage. Otherwise, it will normally beep.
Specification:
Range of AC Voltage:12V-1000V
Frequency: 50Hz / 60Hz
Alarm Mode: Sound and light alarm
Voltage levels:low, moderate,high
Electric Torch: While LED illumination lamp
Low-voltage indicator lamp: Yes
Power Source: 2 x 1.5V AAA Batteries
Product Size: 6.1 x 0.8 x 0.8 inches
Security Level: CE CAT. III 1000V / CAT. IV 600V
Service Temperature: 0-40
Storage Temperature: -10-50
Altitude: <2000m
Package Content:
1 x Non-contact Voltage Tester Pen
2 x 1.5V AAA Batteries
1 x English Manual
3. Klein Tools 69136 General Purpose Twin-Lead Tester
Feature
Tests voltage in the 90-250 volt range, AC or DC5-Inch (127mm) test leads have probes on the ends
Neon lamp glows to indicate a live circuit
Handy pocket clip makes it easy to access and carry
Overall Length: 7-7/8-Inch; Weight: 0.05-Pound
Description
The Klein 69136 General Purpose Twin-Lead Tester tests voltage in the 90-250 volt range, AC or DC. The 5-Inch (127mm) test leads have probes on the ends, and the neon lamp glows to indicate a live circuit. A handy pocket clip makes it easy to access and carry. Overall Length: 7-7/8-Inch. Weight: 0.05-Pound.4. Circuit Tester- 110-460 Volts 4 Way Circuit Tester, Ideal for AC and CD- Multi Voltage Current Tester- Reinforced casing and test leads- By Katzco
Feature
MULTI USE - Can be used in a variety of applications. Mechanics, electricians, and homeowners alike will find great use with this tester. Test for broken or live wires, fuses and circuits. Reach into light sockets, taillights, faulty sockets, distributors, generators, car batteries, headlights, turn signal circuits, motorcycles, suv's, switches, and power outlets. The possibilities are endless!ERGONOMIC DESIGN - The compact ergonomic design of this tester ensures you have a tight comfortable grip while using. Reinforced casing and test leads provide maximum safety against electrical currents.
4 VOLTAGE SETTINGS- This tester contains 4 voltage settings and a combination of glow lamps to indicate the voltage that is being tested. 110, 220, 277, or 460 volts.
USE FOR DC CURRENTS - This tester can also test for DC polarity, frequency, and polyphaser line.
EASY TO USE - Katzco 4 way circuit tester is really easy to use as well, making it great for DIY homeowners. Simply use the color coded negative and positive leads to probe into an outlet or circuit and the one of the lights will illuminate according to voltage and ensure that the current is good.
Description
Circuit Tester- 110-460 Volts 4 Way Circuit Tester, Ideal for AC and CD- Multi Voltage Current Tester- Reinforced casing and test leads- By KatzcoHaving circuit problems or shorts in any electrical equipment?
Well look no further because Katzcos voltage and circuit testers will give you the right answer everytime you use them! Can be used in a variety of applications.
Mechanics, electricians, and homeowners alike will find great use with this tester.
Test for Broken or live wires Fuses and circuits Reach into light sockets Taillights Faulty sockets Distributors Generators Car batteries Headlights Turn signal circuits Motorcycles Suv's Switches Power outlets.
The possibilities are endless!
The compact ergonomic design of this tester ensures you have a tight comfortable grip while using. Reinforced casing and test leads provide maximum safety against electrical currents.
This tester contains 4 voltage settings and a combination of glow lamps to indicate the voltage that is being tested.
110, 220, 277, or 460 volts.
Can also test for DC polarity, frequency, and polyphaser line.
Katzco 4 way circuit tester is really easy to use as well, making it great for DIY homeowners.
Simply use the color coded negative and positive leads to probe into an outlet or circuit and the one of the lights will illuminate according to voltage and ensure that the current is good.
5. USB C Power Meter Testers, Eversame 2 in 1 Type C USB Tester Color Screen LCD Digital Multimeter, USB C Voltage Current Voltmeter Amp Volt Ammeter Detector USB Cable Charger Indicator DC3.6-30V/0-5.1A
Feature
UPGRADED MULTIFUNCTIONAL USB C POWER METER: This new type USB tester is designed to detect the charging status and process of your USB-enabled or type c-enabled devices. Supports Qualcomm QC3.0, QC2.0 and BC1.2. It can be used to test the max output current of USB charger; test capacity and electric energy of power bank; test charging speed and quality of USB cable.PROFESSIONAL SAFETY GUARD: Featured with over-voltage protection, over-current protection, under-voltage protection, low energy protection and alarm system. This upgraded USB Type C tester can detect safety and maximally protect the appliances from damaging. It will cut off output automatically and alarm by sound, while it will save data when power off suddenly. (Please kindly note that this new version doesn't support the screen orientation being rotated.)
MULTIPLE COLOR SCREEN DISPLAY MODES: New upgraded version offers 8 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. With the new interface settings, this instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, D+/D- voltage and other data of USB. (Please kindly note that the backlight time can't be reset on this new version tester, and the backlight of the screen display will process all the time).
WIDE RANGE OF APPLICATION: Thanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. (Support iphone 8 / 8P / iPhone X / MacBook quick charging, 29W power, 5V3A / 9V3A / 12V2.5A / 15V2A). It also can be applied to test other type C devices, such as Samsung Galaxy S9 Plus, Google ChromeBookPixel, OnePlus, HuaWei P9, ect.
EVERSAME PROMISE: We have always believed that a stable and continuously improve product quality, customer satisfaction is the basic functions. We trust our products and we offer 18-month Breakage Warranty in case of defective product. For any reason you are unsatisfied with our product at any time, just feel free to contact support for exchange or refund. WHAT WE PROVIDE: 1X USB Type C Tester.
Description
Product FeaturesVoltage measurement range: 3.60 - 30.0 V(0.01 V)
Current measurement range:0A-5.1A(0.01 A)
Capacity accumulation range:0-99999mAh(0.001 Ah)
electricity accumulation range:0-99999mWh(0.01 Wh)
Product Details:
Product dimensions:60 x 60 x 11mm / 2.36 * 2.36 * 0.43inch
Operation Instruction
1. Press the Power Button Once: Switch the display interface
2. Press the Power Button Twice: Clear the data of capacity
3. Press the Power Button 3 Times: Clear the data of the quantity of electricity
4. Press the Power Button Four Times: Clear the data of time
5. If electric current exists when it's with no load, please press the button Seven times quickly to clear the data of electric current(But please do not press the button Seven times continually during process of testing. )
6. Over Load Voltage Protection Function: The Threshold Voltage Default Parameter is 35.0V. To adjust the Overload Voltage, please switch to the voltage >35.0 interface; double press on the button to increase 1v while Three click on button to decrease 1V. If the detected voltage is higher than the setting voltage, the test will make a beeping alarm sounds.
7. Low Voltage Protection Function: Switch to the voltage <0.00V interface, the default voltage threshold is 0.00V. To adjust the low voltage, double click on the button to increase 1v while Three clicks on button to decrease 1V. If the detected voltage is lower than the setting voltage, the test will make a beeping alarm sounds.
6. Fluke T+PRO-1AC Electrical Tester and AC Voltage Detector Kit
Feature
Automatically measures AC and DC volts with precise digital resolutionEasy and accurate OpenJaw current measurement
Continuity beeper; compact design with neat probe storage
Detachable SlimReach probe tips are customized for national electrical standards; test leads accept fluke accessory test clips
Auto off mode to conserve battery life
Combines two troubleshooting tools, in one convenient combo pack
GFCI trip and continuity beeper
Three ways to detect ac/dc voltage: light, sound, and vibration
Voltbeat technology and continuous self-test let you know it's working
CAT IV 600 V, CAT III 1000 V rated
Description
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.7. Etekcity Digital Multimeter, MSR-A600 Electrical Volt Amp Ohm Voltage Tester Auto-Ranging Multimeters voltmeter Ammeter with AC/DC Current Resistance Continuity Capacitance and REL Diode Test Meter
Feature
MULTI FUNCTIONAL: Autoranging digital multimeter accurately measures Capacitance, Resistance, Continuity, Diode, with AC/DC options for Voltage and Current testsTROUBLESHOOTSCE certified product designed to safely and accurately troubleshoot a variety of automotive and household electrical problems
EASE OF USE: With data hold, backlit LCD display with large digits, Auto Shut-off, REL, and kickstand, recording measurements is easier than ever before at any time, day or night
SAFETY PROTECTION: Reverse polarity protection, low battery indicaction, and overload protection for all ranges. Comes with a rubber sleeve to protect from wear and tear on the job
SAMPLING SPEED: 3 times per second. 90-day return refund guarantee, 1-year warranty, and lifetime support with Etekcity
Description
The Etekcity MSR-A600 Digital Multimeter is the perfect startup multimeter for hobbyists, entry-level electricians, and general household uses. The convenient auto-ranging operation allows you to select the right measurement range when working on a variety of components. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, capacitance, and diode testing. Use this multimeter for household outlets, fuses, wiring, general-purpose and vehicle batteries, automotive circuits and more. Especially great for building and working with your own personalized electronics and other creations. Specifications Safety/Compliances: IEC61010, CAT.II 600V over voltage and double insulation Display: Maximum display 1999 Range selection: Auto ranging Overload display: Display OL Measurement Speed: Updates 3 times/second Diode test: Yes Continuity test: Yes DC Current: -Range and Accuracy: 200/2000A (1.0%+2); 20/200mA (1.0%+2); 2/10A (1.2%+5) AC Current: -Range and Accuracy: 200/2000A (1.2%+3); 20/200mA (1.2%+3); 2/10A (1.5%+5) AC Voltage: - Range and Accuracy: 200mV (1.0%+2); 2V (0.7%+3); 20 (1.0%+3); 200/600V (1.2%+3) DC Voltage: - Range and Accuracy: 20mV (0.7%+3); 200mV (0.7%+3); 2000mV (0.5%+2); 200/600V (0.7%+3) Resistance: - Range and Accuracy: 200 (1.0%+2); 2/20/200K (0.8%+2); 20M (1.2%+5), 200M (5.0%+5) Capacitance: - Range and Accuracy: 2nF Under REL mode (4%+10); 20/200nF (3%+10); 20/200/2000F (3%+5), 2mF (3%+10) Package Includes 1 x Etekcity Digital MSR-A600 Multimeter 2 x Test Leads (a pair) 2 x AAA 1.5V batteries (installed) 1 x User Manual8. Digital Clamp Meter Multimeters MESTEK AC DC Current Voltage Voltmeter Auto Range Ohm Hz Diode Resistance Capacitance Frequency 6000 Counts Electrica Tester Accurate Solid Handy Measure Large Screen
Feature
MULTI FUNCTIONS & PORTABLE- Measure the DC voltage, AC Voltage, AC current, resistance, diodes, circuit continuity.Reach 6000 counts.Durable enough for long term use, Suitable for distribution box, electrical circuit, home users, enthusiasts, professional electricians and technicians.NCV INDUCTION & VFC INVERTER MEASUREMENT FUNCTION-Turn the rotary swith to the NCV gear and close to the lead being measured,buzzer will alarm while the backlight will flash when instrument detects AC voltage;Touch the VFC button during AC voltage or AC current measurement.
DATA HOLD BACKLIGHT BUTTON & lOW BATTERY INDICATION-Press the "HOLD" button,the last reading measured on the display will be maintained,you can not be worried about forget the data you have measured.;press"HOLD" again,the instrument will restore to nomal measuring state.Long press the button for 2 seconds,to turn on/off the backlight.
STABLE & RELIABLE-Made using high-quality plastic material, which gives the thermometer a very nice drop protection. Stable and reliable texture of material, gives the clamp meter a long work life.
SAFETY & ENVIRONMENTAL CERTIFICATION- EN61010-1,-2-030, EN61010-2-032 600V CAT III & ROHS/REACHWe strive to make the BEST Products Possible.If you don't feel 100% satisfied for the product, please contact us and we will do our best to solve all problems.
Description
MESTEK advanced features such as NCV measurement, VFC inverter measurement function, and AUTO-Ranging for diodes , while still measuring voltage, current, capacitance, frequency, resistance, continuity, etc.More accurate than all of clamp meter on the market,with this multiemter can solve the automotive, household appliances, Circuit and all other issues.
Specifications:
Safety/Compliances: IEC61010 CAT.III 600V over voltage and double insulation
Display: Maximum display 5999
Range selection: Auto ranging
Overload display: OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 26mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode Test: Yes(display approximate diode positive voltage data)
Continuity Test: Yes
Polarity Display:Yes
Data Hold Function:Yes
Low Battery Indication :Yes
On-off test: buzzer (when turn on resistance less than 60, the buzzer of machine will alarming)
Inverter Measurement:Yes
Operating temperature: 0~40
Storage temperature: -10~60
AC Current:
-Range and Accuracy: 6A{<0.5A, (3.5%+20); 0.5A, (3%+10)}, 60A{5A,
(3%+10), >5A, (2.5%+10)}, 600A (2.5%+10)
- Measurement frequency range: 50Hz~60Hz
AC Voltage:
- Range and Accuracy: 6/60/600V (1.0%+10)
- Input Impedance: 10 M
- Measurement frequency range: 40Hz~1000Hz
- Overload Protection:600V DC or 600V AC rms
DC Voltage:
- Range and Accuracy: 600mV (0.8%+2); 6/60/600V (0.8%+2)
- Input Impedance: 10 M
- Overload Protection: 600V DC or 600V AC rms
Resistance:
- Range and Accuracy: 600 (1.2%+2); 6/60/600K (1.2%+2); 6M (1.2%+2),
60M (2%+5)
- Overload Protection: 600V DC or 600V AC rms
Package Contents:
1 x Digital Clamp Meter
2 x Test Leads
2 x Alligator clip
9. Klein Tools 69149 Electrical Test Kit with Multimeter, Non-Contact Voltage Tester and Receptacle Outlet Tester
Feature
The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulationThe NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
Receptacle tester detects wiring configurations and indicates correct wiring, open ground, open hot, open neutral, hot/ground reversed
Includes visual and audible continuity indicators up to 25 omega
Description
Klein Tools updated electrical test kit contains MM300 (manual-ranging digital multimeter), ncvt-1 (non-contact voltage tester) and the RT105 (receptacle tester). the ncvt-1 automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles.10. Fluke 1AC-A1-II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, Voltage Detection Range 90 V to 1000 V AC, Audible Beeper, Silent Mode, Includes Batteries And 2 Year Warranty, CAT IV 1000 V Rating
Feature
Voltbeat technology and continuous self test so you always know it is workingUpon detection, tip glows and beeper sounds, IP Rating: IP 40
20 volt to 90 volt AC control circuit model also available
CAT IV 1000 V for added protection,Operating Altitude : 3000 meters
Voltage sensing ranges: Nominally, 90 V AC to 1000 V AC
A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage
Recent Comments