10 best dtm muffler for 2024
We spent many hours on research and managed to find top 10 dtm muffler that is best suitable for you. This review is based on reliable sources, product specs, and hundreds of customer reviews. In this article, were going to highlight the main features of the best dtm muffler and why they are important when it comes to choosing the right one.
Best dtm muffler
1. Universal 3" Slanted Dual Burnt Tip T-304 Stainless Steel Weld On Exhaust Muffler with 2.5" Inlet
Feature
Universal Fit Vehicle With 2.5" Exhaust PipeMade By High-Quality T-304 Stainless Steel with Dual Titanium Burnt Tip
Light Weight High Air Flow Performance Design
Provides Deep Smooth Tone Sound
Installation Instruction is NOT Included. Professional Installation is Highly Recommend
2. BLACKHORSE-RACING 2.5" in 3.5" Out Exhaust Dual Slant Polished Tip Staggered Stainless Set of 2 Left + Right Exhaust Tip
Feature
Inlet: 2.5" (63mm), Outlet: 3.5" (89mm), Total length: 9.5" (241mm), Width: 7" (178mm)Features: Staggered, Duo Outlets, Silver Tips, Duo Layer, Slant Cut
Universal fit for Most Vehicles With 2.5" Diameter Inlet Size Only (Note: Please Refer Dimension To Make Sure It Will Fit Before Purchasing)
Professional installation is highly recommended, No instruction included
High quality polished stamped stainless steel with very strong anti-corrosive, avoid rusting and deformation
3. Q1-TECH, Universal 2.5" Inlet 3" Outlet Dual Exhaust Tip Muffler Stainless Steel Universal 21" Length, Dual Tip, Weld On, Exhaust Muffler (DTM-Style)
Feature
Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit .-and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp.Feature: High Quality T-304 stainless steel, The Dual Tip muffler is 2.5 inch inlet, 3inch outlet, 21 inch length just need to measure the inlet of your car before purchase.
DTM Style Dual Tip muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability.
Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound.
Package includes: 1 x Exhaust Muffler
4. Speedokote Epoxy Fast Dry 2.1 Low voc DTM Primer & Sealer Gray Gallon Kit, SMR-260G/261
Feature
Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075)Can be used as a primer and a sealer
Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes
Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)
Excellent adhesion and corrosion resistance
5. Spec-D Tuning Universal 3" Jdm Hi-Power Dual Tip Dtm Exhaust Muffler
Feature
All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
FITMENT: Universal Size 23"Length x 8.5"Width x 6"Height x Outlet Tip: 3" x Inlet Tip: 2.5" ( Diameter ) x Outlet Tip Length: 6" x Inlet Tip Length: 2".
6. Spec-D Tuning Dual 3" Dtm Titanium Exhaust Muffler
Feature
All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
FITMENT: Universal Size 23"Length x 8"Width x 6"Height x Outlet Tip: 3" x Inlet Tip: 2.5" ( Diameter ) x Outlet Tip Length: 8" x Inlet Tip Length: 2".
7. S SIZVER Weld-On Muffler Series 3" DTM Dual Titanium Burnt Tip 2.5" Inlet+Silencer
Feature
*** Please check this size of the muffler ( 2nd Spec pictures ) and compare the size to the installation location for fitment ***CAUTION: Due to installation to weld-on the muffler, an extended piping might be required and charged my your mechanic.
THIS PRODUCT RECOMMENDS PROFESSIONAL INSTALLATION. Any damage during installation will not be refunded
The muffler provides a deep and smooth tone and Made From High Quality T-304 stainless steel
Package includes: 1 x Exhaust Muffler ; 1 x Removable silencer pre-attached
8. Autozensation Dual 3" Dtm Titanium Exhaust Muffler
Feature
QUALITY MATERIALS: Made with high quality stainless steel.PERFORMANCE UPRADE: Increases exhaust flow for a boost in power.
TROUBLE-FREE INSTALLATION: Requires little to no modification.
COMPLETE SATISFACTION: We offer a 30 day money back guarantee and a 90 day replacement/exchange warranty.
Fitment Info: Universal Size 23"Length x 8"Width x 6"Height x Outlet Tip: 3" x Inlet Tip: 2.5" ( Diameter ) x Outlet Tip Length: 8" x Inlet Tip Length: 2".
9. Q1TECH Universal 25 Inlet 3 Outlet Dual Exhaust Angle Tip Muffler Stainless Steel Universal 22 Length Dual Angle Tip Weld On Exhaust Resonator Muffler DTM Style 1MU30DM2E
Feature
Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit .-and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp.Feature: High Quality T-304 stainless steel, The Dual Slant Tip muffler is 2.5 inch inlet, 3inch outlet, 22 inch length just need to measure the inlet of your car before purchase.
DTM Style Dual Angle Tip muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability.
Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound.
Package includes: 1 x Exhaust Muffler
Part number: 1-MU-30DM2E
10. Cat Security - Catalytic Converter Protection shield, Fits - Toyota Prius 10-15
Feature
Cat Security - Catalytic Converter Protection shield, Fits - Toyota Prius 10-15Made from aluminum which is lighter than all other converter security types
Strategically placed heat extraction holes allow for proper ventilation of the exhaust area.
Corrosion-resistant -No welding required
Recent Comments