10 best swivel light boom for 2024
Finding your suitable swivel light boom is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best swivel light boom including detail information and customer reviews. Let’s find out which is your favorite one.
Best swivel light boom
1. Neewer 30"-75"/76-190cm Swivel Head Aluminum Alloy 1/4" Thread Mount Boom Arm Holder with Sandbag for Reflector,LED Video Light,Strobe Light,Monolight and Other Photographic Equipment
Feature
This reflector holder arm support is made from aluminum alloy and has 3-section extension arm for different sizes and shapes reflectors.It comes with a 1/4"thread screw which enable you to mount reflector,LED video light,monolight or other lighting photographic equipment that have 1/4"screw thread for better photo shooting.
Its flexibility is represented by adjusting the length at the range of 30"-75"/76-190 cm through two locking knobs.
Clamp pivot connector:Connect a boom arm to light stand and enable to adjust the height,angle,and other positioning.
Black/blue sandbag:Dual interior compartments with double zippers for each compartment.Can be filled with anything:sand,gravel,even nuts and bolts.Note:Reflector,Light Stand,Video Light and Strobe Light are NOT included.
Description
Note:Reflector,Light Stand,Video Light and Strobe Light are NOT included.Description:
Assembly is a snap-put the boom through the clamp,attach the clamp to the lightstand.
The impact plastic clamp is adjustable to fit many boom diameters,allows you to position reflector or light in any angle.
The two rubber grips hold on to the rim of the reflector.You may adjust the length to accommodate the size.This is a 3 section extension arm designed to hold reflect disc and panel of different sizes and shapes.
Strong,durable and well-designed sandbag for adding a counter-weight.It is empty and can be filled with sand,gravel,even nuts and bolts.Simply hook it to a light boom arm.
When it supports large size reflector, you need to increase the load-bearing capacity of the base by adding some sandbags.
Specifications:
Material:Aluminum alloy+Plastic
Extend Length:75"/190cm
Minimum Length:30"/76cm
Color:Black
Package Content:
1 x Boom Arm Holder
1 x Clamp Connector
1 x Sand Bag
2. UTEBIT Extendable Reflector Holder Arm 2m Light Stand Kit Heavy Duty Photo Reflector Support with 360 Swivel Head Lighting Boom Arm for Photography Shooting
Feature
Package Contents360 Rotation Swivel Head * 1, Reflector Holder Arm* 1, 2m Light Stand* 1.Upgrated + With 8 Apertures + Adjustable Length Reflector Holder ArmThe length of the reflector holder arm (65-174cm) can be easily fixed by the adjustment knob. It can fix the reflector, and the universal swivel head adopts double runner design, can be fixed on the light stand, with 8 apertures, suitable for most brackets.The reflector holder arm can be rotated 360by adjusting the handle to meet different angles. (Note: There are 2 reflector clips on the reflector holder arm)
Light Stand with 1/4 ScrewsCan be used for HTC VIVE, photography light, fill light, camera, ballhead, perfect for studio shooting, live shooting and video shooting.
Tripod Design + Adjustable Length Light StandThe height of the light stand is freely adjustable (80-200cm), and the light stand is designed with a tripod for better shock resistance and stability. The surface is made of oxidized aluminum alloy, which is durable and has good weight capacity.
Portable & FoldableThis set is lightweight, foldable, easy to carry and storage.
Description
Product Name: Upgrated Reflector Holder Arm + 2m Light Stand SetBrand: UTEBIT
Material: Aluminum + Plastic
Upgrated Reflector Holder Arm
Length: can be adjusted from 65 cm to 174 cm
Weight: about 522g
Application:
1. Can be used as a reflector clip, reflector holder arm;
2. With 2pcs 1 / 4 screws, you can fix small photography lights, flashing lights and other equipments;
3. Can be used as a background stand to fix a lightweight background cloth.
2M Light Stand
Weight: about 1KG;
Height: can be 80 cm - 200 cm
Suitable for most flash light/ umbrella fitting / photography light / PTZ / HTC VIVE / reflector / softbox, etc.
Package Contents:
360 Swivel Head* 1
Reflector Holder Bracket* 1
2M Light Stand* 1
3. Lightdow 2.5ft to 4.5ft Adjustable Overhead Light Boom Arm with Swivel Tripod Clamp & Counter-weight Bag (Model Number: LD-DP025)
Feature
Material: Aluminium Alloy + ABSComes with a clamp that fits most lightstands, and a very well-designed bag for adding a counter-weight.
Assembly is a snap - put the boom through the clamp, attach the clamp to the lightstand, and screw the eye-bolt into the back of the arm to hang the counterweight.
Perfect for costume, portrait and large object photography.
Backed with Lightdow's 1 year hassel free return & replacement warranty for Quality-Related issues.
Description
Features: Material: Aluminium Alloy + ABS Comes with a clamp that fits most lightstands, and a very well-designed bag for adding a counter-weight. Assembly is a snap - put the boom through the clamp, attach the clamp to the lightstand, and screw the eye-bolt into the back of the arm to hang the counterweight. Perfect for costume, portrait and large object photography. Package Content: 1x Boom Arm 1x Swivel Clamp 1x Counterweight Bag4. YUOCU Multi Functional Dual Head Grip Swivel Clamp Head Holder Bracket Mounting Adapter Compatible for Light Stand,Extension Boom Arm and Photography Studio Flash Reflector
Feature
Connects an extension arm to a light stand; Holds the boom arm in placeEnables to adjust the height and angle and gives you flexibility to position the equipment
Easy to setup, use and adjust
Accepts any accessory with a 1/2, 1/4, 3/8, 5/8-inch mounting stud or tubing
Note: Grip head only; Light stand and boom arm are not included
Description
Features:Connect a boom arm to a stand.
The clamp is adjustable to fit many boom diameters.
Enable to adjust the height, angle, and other positioning.
Easy to setup, use and adjust.
A great addition to multiple uses in your studio.
Specifications:
Material: Plastic
Color: Black
Diameter (without hand grip): 77 mm/0.3"
Height (without hand grip): 82 mm /3.2"
Includes :
1x Dual Swiveling Grip Head Clamp
5. Neewer Multi Functional Heavy Duty 2.5-inch Grip Head Swivel Head Holder Mounting Adapter for Light Stand, Extension Boom Arm and Other Photographic Equipment with 1/2,1/4,3/8,5/8-inch Mount (Black)
Feature
Connects an extension arm to a light stand; Holds the boom arm in placeEnables to adjust the height and angle and gives you flexibility to position the equipment
Accepts any accessory with a 1/2, 1/4, 3/8, 5/8-inch mounting stud or tubing
Locks tight with less effort; Easy to set up and use
Note: Grip head only; Light stand and boom arm are not included
Description
Note: Grip head only; Light stand and boom arm are not included
Descriptions:
Connects an extension arm to a light stand; Holds the boom arm in place
Enables to adjust the height and angle and gives you flexibility to position the equipment
Accepts any accessory with a 1/2, 1/4, 3/8, 5/8-inch mounting stud or tubing
Locks tight with less effort
Package Content:
1 x 2.5-inch Grip Head
6. SUPON Dual Head Grip Swivel Clamp Head Holder Bracket for Photography Studio flash Reflector Boom
Feature
The clamp is adjustable to fit many boom diametersDiameter (without hand grip): 77 mm
Height (without hand grip): 82 mm
Enable to adjust the height, angle, and other positioning
Easy to setup, use and adjust
Description
Features:Connect a boom arm to a stand.
The clamp is adjustable to fit many boom diameters.
Enable to adjust the height, angle, and other positioning.
Easy to setup, use and adjust.
A great addition to multiple uses in your studio.
Specifications:
Material: Plastic
Color: Black
Diameter (without hand grip): 77 mm
Height (without hand grip): 82 mm
Includes :
1x Dual Swiveling Grip Head Clamp
7. Neewer 30"-70"/77-180cm Studio Photo Swivel Head Reflector Arm Support Silver, Holding Cross Arm Boom Stand Photo Graphic Equipment(Reflector and light stand are Not Included)
Feature
Comes with a quit hand holding that reflector can be attached to a stand or any tube. This collapsible reflector holder will do the trick.The two rubber grips hold on to the rim of the reflector.
You may adjust the length to accommodate the size.This is a 3 section extension arm designed to hold reflect disc and panel of different sizes and shapes.
The versatile swivel joint allows positioning at almost any angle.
This product is stretch,and easy to carry.
Description
Description:Note:Reflector holding arm ONLY,the reflector is not included.
Attention: when it supports large size reflector, you need to increase the Load-bearing capacity of the base by adding some sandbags.
This reflector holder would be a wonderful addition to your photo shooting.
Made from aluminium alloy, the holder, while being lightweight, can lend a sturdy support to hold reflector disc of many sizes and shapes with the help of a holder clip.
It's easy to assemble and use, can satisfy your need for different lighting at different height.
Specifications:
Material: Aluminium alloy
Maximum Length:70"/180cm
Fold Length: 30"/77cm
Color:Silver
Segment:3
Package Contents:
1 x Reflector holding arm
1 x Grip head
8. UTEBIT Boom Arm Stand Adjustable 80-210cm Heavy Duty Frosted Reflector Holder Arm Professional Overhead Camera Holding Light Stand with Swivel Head and Sandbags for Photography Studio Video
Feature
Universal 1/4 Adapter & Wide Use- The top is a universal 1/4 adapter that can be connected to most photographic equipment such as flash lamps. It is suitable for various occasions such as studio, studio and outdoor.Free Telescopic & Universal Adjustment Knob & Integrated Design- Freely adjustable length, Minimum length: 0.8m, Maximum length 2.1m, Pipe diameter: 25.4mm. The knob type anti-skid adjustment handle can be adjusted at multiple angles (up, down, left and right). 360 degree freely rotating professional boom arm for quick locking. It has an integrated design and does not require a separate installation.
Grinding Process & High Quality Steel- The top light bar is frosted and has low gloss and is not easily reflective. High quality steel material with high hardness, impact resistance and stability.
Tail Rope Design & Counterweight Bag- The sling of the tail weight of the cantilever frame makes it easy to hang the weight bag to balance the ends of the cantilever. It is equipped with a beam-type design weight bag, which is easy to pick up and easy to pick and place. (The counterweight bag does not contain sand)
Packing List- 2.1m Frosted Boom Arm Tripod x 1, Counterweight Sandbag x 1. Note: The product may cause a little friction during transportation, but it does not affect the normal use of the product. If you have any questions, please contact us directly.
Description
SpecificationsBrand: UTEBIT
Product Name: 2.1m professional boom arm stand with sandbag for photography
Material: Steel
Telescopic Length: 80-210cm
Storage Length: 80cm
Weight: 900g
Bearing Capacity: 5-7kg (expanded length 100cm) 1-2kg (expanded length 210cm)
Pipe Diameter: Front - 19mm. Middle - 22.2mm. Behind - 25.4mm
Up & Down Adjustment: Support
Crossbar Rotation: Support
Fit For
It can be equipped with flash, photography lights and other equipment for studio/studio/outdoor shooting.
Packing List
Frosted 2.1m professional boom arm x 1
Counterweight sandbag (without sand) x 1
9. Neewer 2-Set 6-Piece Photo Studio Swivel Caster Wheel - Durable Metal Construction with Rubber Base for Light Stand with 25mm Diameter Leg, Suitable for Studio Video Photography
Feature
KIT INCLUDES: (2) Swivel Caster Wheel Set (6 Pieces); Note: Light Stand is NOT includedSOLID CONSTRUCTION: Made of aluminum alloy, plastic and iron with heavy-duty construction, this swivel caster wheel set is durable and solid
SECURITY: With step lock system to lock and release the wheels, its step on lock can make sure the security when using this wheel set; Its rubber base is perfect for its non-slip design
COMPATIBILITY: Suitable for light stand with 25 mm diameter
SWIVEL MOTION: Easy installation and plenty of swivel motion
Description
NOTE: Light Stand is NOT included.
Descriptions:
Made with heavy-duty construction, it is durable and solid.
Suitable for Light Stand with 25 mm diameter.
Easy to mount and take down, and it has plenty of swivel motion.
Step lock system ensures the security when using this wheel set.
Its rubber base is perfect for its non-slip design.
Specifications:
Wheel Thickness: 0.6 inches / 1.6 centimeters
Wheel Diameter: 2 inches / 5 centimeters
Material: Aluminum Alloy + Plastic + Iron
Wheel Base Material: Rubber
Applicable Diameter: 25 mm (Light Stand)
Package Contents:
2 x Swivel Caster Wheel Sets (6 Pieces)
10. Dual Way Adjustable Reflector Light Boom Stand for Photography,Aluminum Photo Studio Tripod with Boom Arm and Sandbag,Max Height 157 inches /400 cm
Feature
Reflector Holding Boom Arm Bar Length: 47 inches/ 120cm to 85 inches /216cm;Adjustable Light Stand Holder Length: 46 inches/ 117cm to 73 inches /185cm,while combination height can arrive 157inches /400cmMulti Usage: Without the boom arm, equipment can be simply installed on the light stand; While for more flexible use, please attach the boom arm onto the light stand and then you can extend the boom arm and adjust the angle by using the butterfly knob to achieve better performance.
The cross screw mount design allows you to adjust the shooting in multiple directions, avoiding a single shooting angle and providing multiple choices. The 1/4 and 3/8 screw adapters can be switched as you need, and kinds of photographiy accessories can be installed,such as softbox, umbrellas, strobe/flash light, and reflector. Perfect to use outdoor and indoor, giving you a great support to meet various photo or video shooting situations.
Adjustable handle switch design allows the crossbar to switch 180 as you need, the tilt angle is controlled by you.
Extra Shackle: You can attach sandbags to the end of the boom arm when it supports large-sized reflector in order to increase the load-bearing capacity of the base
Description
Description:With cross screw mount design and 1/4"-3/8" adaptor design, Our Two Way Rotatable Light stand can be widely used for most photography equipments , such as strobe lights, reflectors, softboxes, monolights, umbrellas, ect.
Features:
1.The height of the light stand and the length of the arm can be adjusted as you need to meet different shooting requirements.Max Height can be 157 inches / 400cm.
2.The tripod can be easily installed or folded in a place with solid locking system.
3.Aluminum Alloy material and heavy duty structure make it good enough to use for quite a long time, ensuring the safety of your photography equipments while using, which is more durable, balance and safe than normal ones.
4.Sturdy but lightweight design for easy carrying, making your trip more convenient with this portable stand.
5.By changing the weight of the sandbag to create angles of your photography,you can easily control the counterweight ,which is better stabilize your lighting setup.
Specification:
Maximum Height: 157 inches/400 centimeters
Minimum Height: 46 inches/117 centimeters
Maximum Length (Arm Bar): 85 inches/216 centimeters
Arm Bar Rotation Angle: 180 Degree
Material: Aluminum Alloy
Weight:About 2.8Kg
Screw Mount: 1/4" and 3/8"
Package Contents:
1 x Light Stand with Boom Arm
1 x Empty Sandbag
NOTE : The boom arm can not be used alone.
Sandbag comes empty.
Recent Comments